US HRC: Prices jump as mills again hike prices
US domestic hot rolled coil (HRC) spot prices continued to increase this week as mills again pushed offer prices higher, stoking increased skepticism from buyers after a fresh round of mill price increases this morning.
The Argus weekly domestic US HRC Midwest and southern assessments both rose by $50/st to $900/st on Tuesday.
Steel mills continued to be successful in achieving higher flat steel spot offers after formally raising prices by $260/st through a series of increases since the end of November through early last week. The US Midwest spot assessment has increased by more than $270/st since then.
This morning electric arc furnace (EAF) steelmaker Nucor led the latest round of increases, jumping prices up $100/st to an HRC price minimum of $1,000/st. Integrated steelmaker and competitor Cleveland-Cliffs shortly followed on both counts, while US Steel announced its own $100/st price increase without setting a minimum.
The latest hike, if accepted by buyers, would bring the HRC market to the $1,000/st mark for the first time since 28 June 2022. At that time steel prices were falling after being boosted in March and April as raw material supply uncertainty gripped the US market.
Multiple service center contacts were apoplectic about Nucor's price announcement, with one describing it as "ridiculous," another calling the move "ambitious," and one saying the Nucor's action "smacks the market hard."
Offers were reported in a wide range between $800-940/st, while most were in the $900/st range.
One buyer reported buying multiple orders of HRC of a couple thousand tons each at $800/st late last week, falling outside of Argus' HRC methodology. Another service center inquired on a few thousand tons for second quarter delivery and received price offers between $800-900/st.
Those prices are between 10-20pc lower than the targeted spot price, and flat to 13pc lower than the Argus spot assessment.
In the last 20 days US steelmakers have increased prices by $200/st, pointing to increasing raw material prices and extending lead times--points many buyers believe are overblown.
HRC lead times in the Midwest rose to 6-7 weeks from 4-8 weeks, with March appearing to be booked and most mills said to be looking at the first week of April.
Internationally, the Argus iron ore fines 62pc Fe cfr Qingdao assessment rose to $132/dry metric tonne on Tuesday, the highest level since June 2022.
The spread between #1 busheling scrap delivered US Midwest mills and HRC increased by 11pc from the prior week to $500/st and is at the highest level since June 2022, when HRC prices were plunging from a conflict-influenced price spike.
A year ago the spread was $583/st and was bottoming out prior to the conflict in Europe.
Contract discounts of 5-9pc to the current HRC assessment would be the equivalent of $45-81/st.
The Argus HRC import assessment into Houston fell by $20/st on reported pricing out of Mexico. Long lead times from non-North American countries and elevated prices continue to keep imports at bay for now.
The Argus weekly domestic US cold-rolled coil (CRC) assessment jumped by $60/st to $1,060/st as it remains the tightest market, while hot dipped galvanized (HDG) coil assessments rose by $20/st to $1,020/st.
Lead times for CRC edged up by 8-9 weeks from 8 weeks while HDG lead times increased slightly to 7-8 weeks from 6-8 weeks.
The CME HRC Midwest futures market was up again in the last week, pushing up by double digits across the board though falling into backwardation from June onward, a month earlier than last week and indicating that there is not much sentiment for this run lasting into the second half of the year. April prices rose by $30/st to $905/st, while May prices jumped by $36/st to $906/s. June jumped by $36/st to $886/st, while July prices moved up by $20/st to $860/st. August futures rose by $14/st to $844/st, while September prices increased by $17/st to $839/st.
Plate
The Argus weekly domestic US ex-works plate assessment was flat at $1,480/st, the current target price for Nucor that was reinforced last Thursday. Some possible offers as low as $1,440/st were reported.
Lead times slipped slightly to six weeks from 6-7 weeks.
The plate delivered assessment was also flat at $1,510/st.
Related news posts
British Steel Scunthorpe rolling may stop if BF closes
British Steel Scunthorpe rolling may stop if BF closes
London, 13 September (Argus) — British Steel's Scunthorpe rolling mills may not be able to continue operating if the last blast furnace (BF) closes. The rolling lines are powered by gas captured from the BF process. Recent furnace stability problems and the subsequent lack of gas mean the company has been intermittently operating some lines. It is currently running one BF, which it has fed with stocked raw materials. "If they shut the last blast furnace and import semis they would have to put some liquid gas solution in place and modify the reheat furnaces to be able to run on this different gas supply," a source said. The move to one furnace and reduction in gas supply has already affected availability of some products, and service centres expect tight universal channel supply in the coming months as the company opts for heavier, less lossmaking products. Production at Skinningrove and Teesside could continue, as both sites already have gas supply. But rail production at Scunthorpe would cease without any investment in gas supply. Rail is one of the more profitable businesses in the group, and also important for the wider UK as it is a major supplier to Network Rail. Some market participants are gearing up for Jingye, the Chinese owner of British Steel, to walk away. Executives from British Steel, and local politicians, are visiting China for discussions with Jingye, sources suggest. A spokesperson for British Steel refused to comment on "hypotheticals". "We are in ongoing discussions with the government about our decarbonisation plans and the future operations of our UK business. While progress continues, no final decisions have been made," the spokesperson said. A decision on the BFs could be made in the next few weeks, with them both potentially closing before Christmas, sources suggest. Speaking in Parliament earlier this week, business secretary Jonathan Reynolds said he was "heavily constrained" in his options for British Steel and operating on a shorter time window than the previous administration. The Chinese market has weakened considerably in recent months, which will have affected Jingye financially, along with all other mills, sources said. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Tokyo silent on Nippon-US Steel deal to avoid meddling
Tokyo silent on Nippon-US Steel deal to avoid meddling
Tokyo, 13 September (Argus) — The Japanese government is withholding any comment on the politically fraught acquisition of US Steel by Japan's Nippon Steel because it will create meddling, the country's trade and industry (Meti) minister said. Since Nippon Steel announced its $15bn deal to acquire US Steel in December 2023, Tokyo has remained silent despite it evoking bitter political and industrial debate. This is because any governmental comment will cause "interference in the internal affairs", Meti minister Ken Saito said on 13 September. The acquisition is facing stiff resistance from US vice-president and Democratic presidential nominee Kamala Harris who said on 2 September in Pittsburgh that "US Steel should remain US-owned and US-operated".Republican presidential nominee Donald Trump criticised the deal in February, vowing to block the sale . Criticism from both candidates is seen as an attempt to gain the support of US labour unions for their presidential election ambitions. The deal is currently under review by the Committee on Foreign Investment in the United States (CFIUS), with US President Biden possibly considering vetoing the deal. The Japanese business federation Keidanren responded with an open letter to US treasury secretary Janet Yellen, who chairs the CFIUS, expressing concern about "political pressure being brought to bear" on the committee. "We fear that the CFIUS process is being used to further political agendas that are outside the committee's purview and putting the US economy and workers at risk", the letter said. "It is critical that CFIUS remain solely focused on defending US national security while championing economic openness. That was the standard set when Congress codified CFIUS in the 1980s". Meti minister Saito did not make any further direct comment on the deal, only to reiterate that each and every transaction by US and Japanese companies are the building blocks for astrong and resilient bilateral economy. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Padnos acquires three Midwest metal recyclers
Padnos acquires three Midwest metal recyclers
Pittsburgh, 12 September (Argus) — Metal recycler Padnos has acquired three businesses in Michigan and Indiana, the company said Wednesday. The Holland, Michigan-based company purchased the Sam Winer and Company scrap yard in Elkhart, Indiana, Howe Auto Sales in Bay City, Michigan, and Grandpa's Garage in Traverse City, Michigan. Grandpa's Garage is located next door to Padnos' Traverse City facility, allowing the company to expand that location. Financial details of the transactions were not disclosed. Padnos now operates 30 recycling facilities in Michigan and Indiana. By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Mexico’s July industrial output growth slows to 0.2pc
Mexico’s July industrial output growth slows to 0.2pc
Houston, 12 September (Argus) — Mexico's industrial production growth slowed to just 0.2pc in July from the previous month, statistics agency Inegi reported Tuesday, supported by rebounds in construction and non-oil mining. The monthly gain in industrial output, following a 0.4pc increase in June and a 0.7pc gain in May, marked a fifth month of expansion in the seven months through July. Seasonally adjusted, construction led major components in July, expanding by 2.6pc over June, with mining expanding by 1.4pc over the previous month. Oil and gas extraction, however, was down by 0.2pc from the previous month, after 0.5pc growth was reported in June. The segment has now shown contraction in 10 of the last 12 months. Extraction of other minerals, however, increased by 0.4pc over the prior month, after a 4.6pc decline reported in June. Mining-related services also rebounded, up 14.8pc in July after a 9.7pc contraction in June. Manufacturing reversed course in July, registering a 0.8pc contraction from the previous month after posting a 2pc expansion in June. This is largely the result of the auto manufacturing segment posting a monthly contraction of 3.1pc in July after a 5.8pc expansion in June. The auto segment comprises 24pc of the manufacturing component in Inegi's monthly industrial activity report (Imai), and manufacturing accounts for 63pc of nationwide industrial activity. Auto output, however, should rebound in August with INEGI reporting Monday that light vehicle production in August was up almost 20pc from July. Meanwhile, the utilities component — tracking provision of electric power, water and natural gas — contracted for a second consecutive month, down 0.9pc in July after a 0.2pc contraction recorded in June. Manufacture of products derived from oil or coal expanded for a second month, up 3pc in July on a monthly basis after a 10.6pc jump in June. Looking ahead, Mexican bank Banorte said, "We believe that the bias for industry in the remainder of the year will be negative, with headwinds for construction and manufacturing." Some drivers, it said, include: "weakness in US industry; lower base metal prices due to a global economic slowdown, especially in China; the completion of local infrastructure works; and some circumstantial factors that have added volatility within different sectors." Nevertheless, Banorte's industrial outlook for 2025 and the medium-term remains positive as the major infrastructure projects for the incoming administration get underway. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more