Latest market news

Pan Era, Milliken tie up on Indonesian PP recycling

  • Market: Petrochemicals
  • 15/11/23

Indonesian polyolefins recycler Pan Era has today signed an initial agreement with US manufacturing company Milliken to recycle polypropylene (rPP) in Indonesia.

Pan Era will provide the rPP while Milliken Chemical, the subdivision of the company specialising in additives, will enhance the rPP with additives and handle the manufacturing of finished goods. The partnership will allow the Indonesian recycler to access more customers in the domestic Indonesian markets and within the region. The rPP produced will be under Pan Era's patented recycled polyolefin brand Eterlene.

The rPP will initially be used to produce thin wall plastic packaging for non-food contact applications. Pan Era will supply approximately 8,000 t/yr of rPP, based on existing Indonesian recycling rates of rPP, according to Milliken's plastic additives, chemical division country manager Daniel Tanzil. Using rPP in food-contact applications is currently tricky, given a lack of standardised regulations within the region.

The melt flow index (MFI) of rPP produced in Indonesia is typically below 30 g/10 minutes. The collaboration between the two companies has produced three new grades of rPP, all with an MFI of 40 g/10 minutes or higher. A higher MFI diversifies the range of rPP applications from thin wall packaging and can extend to the automotive, electronics and industrial sectors, Tanzil said.

The new grades of rPP could be commercially available to customers within the next two months, but this could be prolonged as prospective customers will have differing requirements for the specifications of grades of rPP needed for their products, Milliken said. Milliken has begun marketing the product to global brand owners such as Procter and Gamble and Unilever as well as local companies such as Wings, Tanzil said.

Milliken has previously collaborated with other PP recyclers such as Florida-based Purecycle Technologies to enhance their rPP.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
16/07/24

Mitsubishi, Neste aim to boost bio-naphtha supplies

Mitsubishi, Neste aim to boost bio-naphtha supplies

Tokyo, 16 July (Argus) — Japanese trading house Mitsubishi and Finnish refiner Neste plan to boost sales of Neste's biomass-based naphtha by enhancing their partnership in Japan. The companies signed a partnership agreement on an unspecified date, aiming to co-operate on prompting a switch from conventional petroleum naphtha to Neste's bio-naphtha. They plan to encourage Japanese downstream companies or users of petrochemical goods and plastics, like food and beverage suppliers, apparel firms and electric appliance manufacturers, to introduce bio-naphtha into their supply chains. Mitsubishi and Neste have already partnered on delivering bio-naphtha to produce renewable paraxylene for Japanese consumers Goldwin and Suntory . Japanese companies are increasingly attempting to incorporate bio-naphtha for their decarbonisation strategies. Japanese petrochemical producer Resonac has produced biomass-based olefins like ethylene and propylene since June by purchasing bio-naphtha from Neste. Fellow petrochemical producer Mitsui Chemicals bought bio-naphtha from Neste to process it at its Osaka cracker. Idemitsu and Toray have been partnering to produce styrene monomer and acrylonitrile butadiene styrene resin from bio-naphtha. Japan imported 6mn t of petroleum naphtha during January-May, down by 5.9pc from the same period in 2023, according to finance ministry data. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

US Gulf polymer plants restarting following hurricane


12/07/24
News
12/07/24

US Gulf polymer plants restarting following hurricane

Houston, 12 July (Argus) — Some US Gulf Coast polymer plants and rail lines are resuming operations following shutdowns as a result of Hurricane Beryl earlier in the week. Multiple polyethylene (PE) and polypropylene (PP) units shut down pre-emptively before the storm, which came ashore in Matagorda, Texas, on 8 July, and many are still in the process of restarting. Formosa Plastics had pre-emptively shut down operations at its Point Comfort, Texas, site, but did not receive any major damage from Hurricane Beryl. The site, including approximately 1.8mn t/yr of PE and 917,000 t/yr of PP production, is in the process of resuming operations with the end of next week as the target date for a complete return, the company said in a statement. The status of multiple other PE and PP units in the region was not immediately available. Companies including Dow, Ineos, Braskem America, and LyondellBasell, which all had some units shut down during the storm, did not immediately respond to requests for operational updates. In addition to plant outages, polymer producers had been experiencing transportation issues earlier in the week due to flooding, but the repair of Union Pacific's lines in the Galveston area yesterday has allowed rail operations to resume, according to a statement from the company. It will take several days to work through the remaining train congestion, and widespread power outages will likely continue to cause delays throughout the impacted area. By Cole Sullivan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

China's Wanhua starts up polyolefin elastomer unit


12/07/24
News
12/07/24

China's Wanhua starts up polyolefin elastomer unit

Shanghai, 12 July (Argus) — Chinese producer Wanhua Chemical has started up its new 200,000 t/yr polyolefin elastomer (POE) unit on 29 June, with its first batch of POE loaded and dispatched on 10 July. This is China's second POE unit after Hainan Beiouyi's 30,000 t/yr unit, which started operations in December 2023. The POE produced by domestic producers uses ethylene and 1-butene as feedstock, as the mass production of feedstock 1-octene has not yet been achieved in China. Wanhua Chemical has started building the second phase of the POE project, with a production capacity of 400,000 t/yr, at Penglai, Shandong province. It is expected to start operations by the end of 2025, bringing the company's total POE capacity to 600,000 t/yr. Wanhua Chemical is a state-owned company in Shandong, with businesses covering polyurethane, petrochemicals and fine chemicals, among others. Wanhua Chemical owns and operates a 450,000 t/yr high-density/linear low-density polyethylene (HD/LLDPE) unit, a 350,000 t/yr HDPE unit, and a 300,000 t/yr polypropylene unit. China's new POE production capacities t/yr Company Location Capacity (t/yr) Start-up date Wanhua Chemical Yantai Shandong 200,000 29-Jun-24 Wanhua Chemical Yantai Shandong 400,000 End 2025 Lianyungang Petrochemical (Zhejiang Satellite) Lianyungang Jiangsu 100,000 2025 Sinopec Maoming Petrochemical Maoming Guangdong 50,000 2025 Shandong Jingbo Petrochemical Binzhou Shandong 100,000 2025 Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Lummus, MOL to build Hungary pyrolysis plant


11/07/24
News
11/07/24

Lummus, MOL to build Hungary pyrolysis plant

London, 11 July (Argus) — Technology licenser Lummus and Hungarian oil firm Mol have started construction designs for a pyrolysis chemical recycling plant at Mol's site in Tiszaujvaro, Hungary. It will have a processing capacity of 40,000 t/yr of mixed plastic waste. The plant will produce pyrolysis oil for the Mol petrochemicals facility at the same location, which has a capacity of 660,000 t/yr for ethylene and 335,000 t/yr for polymer-grade propylene. Mol and Lummus signed an agreement to integrate pyrolysis chemical recycling at its refining and petrochemical sites in Slovakia and Hungary in 2023 . Mol indicated at the time it aimed for production capacities of more than 100,000 t/yr of recycled plastic by 2030. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Inovyn mothball two of four lines at Newton Aycliffe


11/07/24
News
11/07/24

Inovyn mothball two of four lines at Newton Aycliffe

London, 11 July (Argus) — PVC producer Inovyn has mothballed two of four production lines at its Newton Aycliffe site in Durham, England. A company source said that the two largest lines at the site are still operating. The plant can produce 280,000 t/yr of suspension PVC (s-PVC). Market sources confirmed the closure to Argus . The PVC market in Europe is currently affected by low demand with weak construction figures in a lengthy market. The Aycliffe site manufactures dry blend, rigid, flexible and medical grades of PVC. The site is not fully integrated and imports vinyl chloride monomer (VCM) from another Inovyn site in Rafnes, Norway. The smaller lines impacted mainly produce non-standard s-PVC grades. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more