Latest market news

US factory activity contracts for 6th month: ISM

  • Market: Metals, Natural gas
  • 01/10/24

US manufacturing activity remained in contraction in September for a sixth consecutive month, as a measure of prices shrank for the first time this year and new orders and production weakened, but at diminishing rates.

The manufacturing purchasing managers index (PMI) registered 47.2 in September, matching August's reading, the Institute for Supply Management (ISM) said today. The PMI reading, below the 50 threshold signaling contraction, marked a 22nd month of contraction out of the last 23 months.

Manufacturing accounts for about 10pc of the US economy, and the largest part of the economy — services — has expanded in six of the last eight months through August this year. ISM's services PMI report will be released Wednesday.

"Demand remains subdued, as companies showed an unwillingness to invest in capital and inventory due to federal monetary policy … and election uncertainty," ISM said. "Production execution stabilized in September. Suppliers continue to have capacity, with lead times improving and shortages reappearing."

The Federal Reserve on 18 September cut its target lending rate by a half point, its first cut since 2020, and signaled another 150 basis points of cuts were likely through 2025, as it has succeeded in bringing inflation close to its 2pc target. A key employment report on Friday will factor into the Fed's thinking, with little more than a month to go before the 5 November presidential election.

The new orders index rose to 46.1 in September from 44.6 in August, reflecting a diminishing rate of contraction. Production rose to 49.8, still contracting but approaching expansion territory, from 44.8 the prior month. Employment fell to 43.9 in September from 46 the prior month, reflecting a more rapidly weakening labor market.

New export orders fell to 45.3 in September, showing deepening contraction, from 48.6, and imports fell to 48.3 from 49.6. Prices fell to 48.3 from 54. Inventories fell to 43.9, returning to pre-August low levels, from 50.3, while customers' inventory levels rose by 1.6 points to 50 in September, suggesting a "demand level that is neutral to negative for future new orders and production," ISM said.

The prices index registered 48.3, down from 54 the prior month, indicating raw material prices fell last month after eight straight months of increases.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

US light vehicle sales surged in September


03/10/24
News
03/10/24

US light vehicle sales surged in September

Houston, 3 October (Argus) — Domestic sales of light vehicles rebounded in September, increasing to a seasonally adjusted rate of 15.8mn on the strength of greater truck purchases. Sales of light vehicles — trucks and cars — rose from a seasonally adjusted annual of rate 15.3mn in August, the Bureau of Economic Analysis reported today. Sales have whipsawed the previous four months, but September's rate largely was in line with the 15.7mn unit rate in September 2023. The US Federal Reserve last month cut its target rate for the first time since 2020, bringing it down by 50 basis points from its 23-year highs as inflation has been easing. Lower inflation and Fed easing, which ripples across credit markets, make it more affordable for people to purchase new vehicles. Fed policymakers have penciled in another 150 basis points worth of cuts through 2025, as they hope to head off any weakening in the labor market that could scuttle the wider economy. Higher overall sentiment about the US economy, fueled by a robust 3pc growth in gross domestic product (GDP) in the second quarter, healthy labor conditions and consumer spending also have encouraged consumers to spend. Sequentially, light truck sales increased by 3.1pc to a 12.8mn unit rate in September, while sales of cars rose by 4.4pc to a 3mn unit rate in the same time period. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Israel-Iran conflict threatens Mena steel supply


03/10/24
News
03/10/24

Israel-Iran conflict threatens Mena steel supply

London, 3 October (Argus) — The escalating Israel-Iran conflict could lead to a shortage of steel and steelmaking raw materials in the Mena region because of potential logistical disruptions and a surge in freight prices. Tensions have risen after the killing of the leader of Iran-backed Hezbollah militia Hassan Nasrallah , by Israel on 27 September, which sparked retaliation from Iran. This has seen an increase in attacks on vessels in the Red Sea by Yemen's Iran-backed Houthis, disrupting trade routes. The conflict could adversely affect construction and steel demand in the Mena region, which remains a key export outlet for long steel products, as well as billets. "The attacks are highly likely to increase and imports from Asia to Turkey will be negatively impacted due to high freight and therefore, high steel prices," said a Turkish integrated producer whose steel cargo was targeted by Houthi missiles a few months ago. An international iron ore trader echoed this, expecting freight prices to increase. Over the past few years, Israel and Yemen were important rebar export destinations for Turkey. But in April , Turkey imposed a trade ban on Israel. Turkish rebar exports to Yemen have sharply dropped owing to risks to shipments. Currently steel trading activity with Lebanon is on hold . Lebanon typically purchases high volumes of long steel, particularly rebar, from Egypt, Algeria and Libya. Market participants in the UAE, a major producer and consumer in the Gulf Co-operation Council (GCC), had previously anticipated a strong final quarter of the year, because of expected increases in construction activity from large-scale projects. But should the situation escalates, projects could be on hold and demand will shrink, a producer warned. Trading in Oman faces greater risk compared with other GCC countries because of its shared border with Yemen. The conflict could also negatively impact the flat steel industry in north Africa, as many re-rollers import hot-rolled coils (HRC) for re-rolling or coating, often finding it more feasible to use supply from Asia rather than local material. "HRC imports to Algeria will be endangered and this will increase prices of cold-rolled coils (CRC) and galvanised steel prices," a market participant commented. By Elif Eyuboglu Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Indonesia’s Ni expansion via HPAL could face challenges


03/10/24
News
03/10/24

Indonesia’s Ni expansion via HPAL could face challenges

Singapore, 3 October (Argus) — Indonesia is expected to continue expanding its nickel production in the coming years, especially through increasing its high-pressure acid-leaching (HPAL) capacity, but the lack of readily available sulphuric acid and proper management of the tailings waste could pose challenges to this plan. Production is expected to rise despite an anticipated surplus in the supply of nickel in the market. Sulphuric acid is used in the HPAL process to separate nickel and cobalt from nickel ore to produce mixed hydroxide precipitate (MHP), which is the feedstock for the downstream processing of nickel sulphate, cathode and battery. Indonesia is expected to produce 325,000-345,000t of MHP this year, up from around 269,000t of in 2023, according to market sources. But with several MHP projects planned to come online in the next few years, MHP output for the next three years is projected to treble to 800,000-900,000t, according to the country's deputy minister for the co-ordinating ministry for maritime and investment affairs Septian Hario Seto on 2 October at a metal event in London. As this would require a lot more nickel ore and sulphuric acid, there are concerns that the availability of limonite ore could deplete as fast as the saprolite ore supply, which is mainly used for nickel pig iron and matte production. There were also discussions that the Indonesian government will convene with nickel market participants to discuss about the supply situation of limonite ore. There are currently four HPAL facilities operating in Indonesia. This includes Huayou's Huayue and Huafei projects , GEM's QMB project and Lygend's HPAL project. Others were also concerned that the availability of sulphuric acid could be a limiting factor to Indonesia's rapid expansion of HPAL production, as sulphuric acid demand from Indonesian HPAL projects is expected to reach 7.12mn t in 2025, almost 40pc increase from this year's demand at 5.17mn t, according to Argus estimates. Indonesia has been importing sulphuric acid from mainly China and South Korea to meet the growing demand for its production units at Obi Island and Sulawesi. But a ramp-up in sulphur-burning operations has pushed several MHP producers like Halmahera Persada Lygend to switch to buying lower-cost sulphur instead. For most sulphur burners, 1t of sulphur produces around 3t of sulphuric acid. The startup of Freeport McMoran's Manyar smelter in Java integrated industrial and port estate in East Java's Gresik, coupled with mining firm Amman Mineral Nusa Tenggara's (AMNT) copper smelter in the West Sumbawa regency of Nusa Tenggara province, is also expected to alleviate some supply concerns, with the two expected to add at least 3mn t/yr of acid capacity by the end of 2025. Proper disposal of tailings waste could pose another challenge to Indonesia's planned HPAL expansion, particularly with increasing scrutiny on the environmental, social and governance (ESG) standards by Indonesia's mining industry. The HPAL process generates a large volume of tailings, with energy consultancy Wood Mackenzie estimating an output of 1.4-1.6t of waste from every 1t of nickel produced through HPAL. There are three common ways to dispose tailings waste – tailings dam, deep sea tailings and dry stacking. Dry stacking is more widely used because it is considered as the more sustainable option. But dry stacking also comes with its own environmental and biodiversity risks, as Indonesia's seasonal wet weather and seismic activity of the site could be a problem for waste storage. To ensure a smooth expansion in HPAL production, it is crucial for Indonesia to find ways to secure the necessary sulphuric acid supplies and to adopt appropriate methods for tailings waste disposal. By Sheih Li Wong and Deon Ngee Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

ArcelorMittal increases steel coil offers by €40/t


02/10/24
News
02/10/24

ArcelorMittal increases steel coil offers by €40/t

London, 2 October (Argus) — Europe's largest steelmaker ArcelorMittal has increased its hot-rolled coil (HRC) offer by €40/t to €590/t base in northwest Europe. All offers below this level have been withdrawn and the company is "firm" on this level, buyers said. One service centre reported an offer around €605/t base, for a small tonnage. NLMK La Louviere has also increased its offer by around €25/t, according to sources. The increases follow a sharp rise in China following the country's recent stimulus announcement, and firmer raw material costs — Argus ' benchmark 62pc Fe ICX iron ore index hit $109.35/dmt on 1 October, up from $88.70/t on 23 September, while fob Australia premium low-volatile coking coal prices jumped by $18.80/t to $204.30/t. Service centres have been trying to add additional tonnages to existing deals in recent days, according to mill sources, which they suggest is a signal buyers think the market has reached a floor. They also anticipate a technical rebound from the automotive sector in the first quarter of next year, after a weaker period of late. Futures markets have also been reacting to the increases in China, and talk of higher EU offers. As off 11:23 London time (10:23 GMT), over 26,000t had traded on the CME Group's north European HRC contract, with two 10,000t January-February spreads trading at -€10/t, lessening the pronounced contango of recent days. A 4,000t October-December spread traded at -€65/t, with the outright prices at €565/t and €630/t. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more