Global steam cracker operating rates have been trending downward from 89pc in 2018 to 79pc in 2023, driven by the combination of high-capacity increase and slower economic growth in recent years. 

In Argus's latest Ethylene Analytics, a recovery is forecast to take place in the coming years as the recent wave of new capacity cools off, absorbing demand growth before the second wave of capacity addition outgrows demand from 2027-2029. This recovery is based on a modelled assumption of modest growth in the global economy and a slowdown in capacity expansion. Historically, olefins demand growth has trended in line with GDP growth on a global basis; in recent years this relationship has disconnected. This was a result of the imbalance between the service and manufacturing industries, but we anticipate the trend will revert sooner or later moving forward.  

The petrochemical industry is experiencing high levels of upcoming capacity over the next five years. On a global level, ethylene and propylene capacity is expected to increase by 47.4mn t (4pc) and 44.0mn t (5pc), respectively, over the next five years while global capacity growth from 2018 to 2023 averaged at 4.5pc/yr for both ethylene and propylene. Most investment in ethylene production has gone into steam crackers where ethylene is the main product and propylene is produced as a co-product. Propylene will see a high-capacity increase from not only steam crackers but also from propane dehydrogenation (PDH) projects, which will delay the recovery of global propylene operating rates.   

The first wave of ethylene capacity addition is cooling off, but a second wave is expected to kick off in 2026. However, propylene is currently undergoing its wave of capacity addition before seeing a slowdown from 2028 onward. On the propylene side of the olefins chain, 50pc of the upcoming capacity will come from PDH, 34pc from steam crackers and the rest will be a combination of sources from refinery, coal, and methanol.  

Operating rates in all regions are being negatively impacted by the combination of high-capacity increase and slower global economic growth. Olefins demand has experienced slower growth over the past two years, with negative growth in 2022 as a result of high inflation and lower consumer spending.   

Based on current market fundamentals there have been project delays across most regions and also rationalisation from uncompetitive units. With steam crackers running at lower-than-normal operating rates, rationalization of capacities is a significant unknown as what assets are to shut down are dependent on many factors such as company financials, politics, and integration factors. This makes the rationalization of specific units tough to predict.  

As western nations are experiencing slower GDP growth, developing nations will be the key regions for olefins growth. We are seeing a slowdown in Chinese and northeast Asian GDP, but south Asian GDP has been holding strong. Polymer demand, which accounts for more than half of olefins consumption will be the main driver of olefins demand (65pc of ethylene gets consumed into PE and 71pc of propylene gets consumed into PP globally). From a supply perspective, 17pc (8mn t) of all upcoming cracker projects have yet to start construction, which will give operating rates a boost if delayed. Given the slowdown in global economic growth in the past two years, high interest rates, and inflation, the overall outlook is fairly bearish. Consumer spending, household disposable income, economic growth, project timelines, and rationalization from uncompetitive production facilities will be the main indicators of how quickly it will take for operating rates to recover. 

Global year on year ethylene capacity adding by regionGlobal year on year propylene addition by region

Current announced projects

In the past five years, most steam cracker capacity increases took place in China and the trend is expected to persist over the next five years based on announced projects, but most regions are investing. Other Asian countries such as India, South Korea, Vietnam, and Indonesia are also investing. A total of 25.6mn t and 32.9mn t of ethylene and propylene capacity is expected to come online in China over the next five years. Below is the summary of upcoming stream cracker projects globally.  

Chinese projects that are currently under construction include Wanhua Chemial, Yulongdao Refining & Petrochemical, Sinopec, Jilin Petrochemical and more. Joint venture steam cracker projects in China between domestic producers and multinational corporations have also started construction which includes Sabic-Fujian Petrochemical, Ineos Sinopec Tianjin, Shell CNOOC Petrochemical, BASF Zhanjiang, and ExxonMobil. These projects will increase ethylene capacity by 21.8mn t over the upcoming five years. Asian nations excluding China includes S-oil South Korea, Hindustan Petroleum India, Lotte Chemical Indonesia have also started construction which totals 5.2mn t of ethylene capacity.  

Borouge, SATORP and a joint venture between CP Chem and Qatar Energy in the Middle East are also investing in new crackers with a total capacity addition of 5.2mn t. In Europe, Ineos Project One and PKN Orlen have announced projects while Sabic UK invested in a green project. The Sabic project involves restarting and converting its current cracker to run on hydrogen.  

Russia has steam cracker projects slated to start up in the five-year span, including Nizhnekamskneftekhim, Irkutsk Oil, Baltic Chemical, and Amur GCC while Uzbekistan has also announced an expansion from Gas Chemical Complex. North America has three projects slated to come on over the next five years that will increase its capacity by 3.6mn t. North American projects include Shintech US, Joint venture CP Chem Qatar Energy, and Dow in Canada.  

Argus’s Ethylene Analytics includes a global plant-level capacity dataset detailing expected project timelines.  

 

Author: Dhanish Kalayarasu 

Date: 15/05/2024 

 

Related news

News
16/07/24

Mitsubishi, Neste aim to boost bio-naphtha supplies

Mitsubishi, Neste aim to boost bio-naphtha supplies

Tokyo, 16 July (Argus) — Japanese trading house Mitsubishi and Finnish refiner Neste plan to boost sales of Neste's biomass-based naphtha by enhancing their partnership in Japan. The companies signed a partnership agreement on an unspecified date, aiming to co-operate on prompting a switch from conventional petroleum naphtha to Neste's bio-naphtha. They plan to encourage Japanese downstream companies or users of petrochemical goods and plastics, like food and beverage suppliers, apparel firms and electric appliance manufacturers, to introduce bio-naphtha into their supply chains. Mitsubishi and Neste have already partnered on delivering bio-naphtha to produce renewable paraxylene for Japanese consumers Goldwin and Suntory . Japanese companies are increasingly attempting to incorporate bio-naphtha for their decarbonisation strategies. Japanese petrochemical producer Resonac has produced biomass-based olefins like ethylene and propylene since June by purchasing bio-naphtha from Neste. Fellow petrochemical producer Mitsui Chemicals bought bio-naphtha from Neste to process it at its Osaka cracker. Idemitsu and Toray have been partnering to produce styrene monomer and acrylonitrile butadiene styrene resin from bio-naphtha. Japan imported 6mn t of petroleum naphtha during January-May, down by 5.9pc from the same period in 2023, according to finance ministry data. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

US Gulf polymer plants restarting following hurricane


12/07/24
News
12/07/24

US Gulf polymer plants restarting following hurricane

Houston, 12 July (Argus) — Some US Gulf Coast polymer plants and rail lines are resuming operations following shutdowns as a result of Hurricane Beryl earlier in the week. Multiple polyethylene (PE) and polypropylene (PP) units shut down pre-emptively before the storm, which came ashore in Matagorda, Texas, on 8 July, and many are still in the process of restarting. Formosa Plastics had pre-emptively shut down operations at its Point Comfort, Texas, site, but did not receive any major damage from Hurricane Beryl. The site, including approximately 1.8mn t/yr of PE and 917,000 t/yr of PP production, is in the process of resuming operations with the end of next week as the target date for a complete return, the company said in a statement. The status of multiple other PE and PP units in the region was not immediately available. Companies including Dow, Ineos, Braskem America, and LyondellBasell, which all had some units shut down during the storm, did not immediately respond to requests for operational updates. In addition to plant outages, polymer producers had been experiencing transportation issues earlier in the week due to flooding, but the repair of Union Pacific's lines in the Galveston area yesterday has allowed rail operations to resume, according to a statement from the company. It will take several days to work through the remaining train congestion, and widespread power outages will likely continue to cause delays throughout the impacted area. By Cole Sullivan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

China's Wanhua starts up polyolefin elastomer unit


12/07/24
News
12/07/24

China's Wanhua starts up polyolefin elastomer unit

Shanghai, 12 July (Argus) — Chinese producer Wanhua Chemical has started up its new 200,000 t/yr polyolefin elastomer (POE) unit on 29 June, with its first batch of POE loaded and dispatched on 10 July. This is China's second POE unit after Hainan Beiouyi's 30,000 t/yr unit, which started operations in December 2023. The POE produced by domestic producers uses ethylene and 1-butene as feedstock, as the mass production of feedstock 1-octene has not yet been achieved in China. Wanhua Chemical has started building the second phase of the POE project, with a production capacity of 400,000 t/yr, at Penglai, Shandong province. It is expected to start operations by the end of 2025, bringing the company's total POE capacity to 600,000 t/yr. Wanhua Chemical is a state-owned company in Shandong, with businesses covering polyurethane, petrochemicals and fine chemicals, among others. Wanhua Chemical owns and operates a 450,000 t/yr high-density/linear low-density polyethylene (HD/LLDPE) unit, a 350,000 t/yr HDPE unit, and a 300,000 t/yr polypropylene unit. China's new POE production capacities t/yr Company Location Capacity (t/yr) Start-up date Wanhua Chemical Yantai Shandong 200,000 29-Jun-24 Wanhua Chemical Yantai Shandong 400,000 End 2025 Lianyungang Petrochemical (Zhejiang Satellite) Lianyungang Jiangsu 100,000 2025 Sinopec Maoming Petrochemical Maoming Guangdong 50,000 2025 Shandong Jingbo Petrochemical Binzhou Shandong 100,000 2025 Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Lummus, MOL to build Hungary pyrolysis plant


11/07/24
News
11/07/24

Lummus, MOL to build Hungary pyrolysis plant

London, 11 July (Argus) — Technology licenser Lummus and Hungarian oil firm Mol have started construction designs for a pyrolysis chemical recycling plant at Mol's site in Tiszaujvaro, Hungary. It will have a processing capacity of 40,000 t/yr of mixed plastic waste. The plant will produce pyrolysis oil for the Mol petrochemicals facility at the same location, which has a capacity of 660,000 t/yr for ethylene and 335,000 t/yr for polymer-grade propylene. Mol and Lummus signed an agreement to integrate pyrolysis chemical recycling at its refining and petrochemical sites in Slovakia and Hungary in 2023 . Mol indicated at the time it aimed for production capacities of more than 100,000 t/yr of recycled plastic by 2030. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Inovyn mothball two of four lines at Newton Aycliffe


11/07/24
News
11/07/24

Inovyn mothball two of four lines at Newton Aycliffe

London, 11 July (Argus) — PVC producer Inovyn has mothballed two of four production lines at its Newton Aycliffe site in Durham, England. A company source said that the two largest lines at the site are still operating. The plant can produce 280,000 t/yr of suspension PVC (s-PVC). Market sources confirmed the closure to Argus . The PVC market in Europe is currently affected by low demand with weak construction figures in a lengthy market. The Aycliffe site manufactures dry blend, rigid, flexible and medical grades of PVC. The site is not fully integrated and imports vinyl chloride monomer (VCM) from another Inovyn site in Rafnes, Norway. The smaller lines impacted mainly produce non-standard s-PVC grades. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.