US copper chopping capacity growth leads to oversupply

  • Market: Metals
  • 07/08/19

New copper wire chopping capacity that came on line in the US over the last two years sought to convert an abundance of insulated wire into exportable, higher-quality grades in response to tougher scrap import standards from key consumer China.

But the onslaught of new chopping capacity has caused supply to surpass demand in the wire and cable recycling sector. Over a dozen new full-scale chopping lines have begun operating in the US in the last year, according to market participants. That brings the number up from the 70 chopping lines operating in North America as of 2017, 63 of which were in the US, according to a survey by Recycling Today.

"New chopping lines have come on board in the last year or two, but quality, consistent feedstock and volume is challenging for the new guys which gives the current choppers their primary marketing advantage," a scrap broker said.

An estimated additional 20-30 medium-to-small scale choppers have also joined the market, but are understood to be operating more sporadically.

Choppers are now trying to sell excess supply in the face of tepid US demand and Chinese import restrictions. Domestic consumers, such as brass mills, have been bombarded by offers from processors looking to move material, leading to lower prices.

Copper chop prices have weakened in 2019, with spreads for domestic and export #1 chops as assessed by Argus falling from an average 12-11¢/lb under Comex, respectively, to 17-16.5¢/lb under in late July. Spreads for #2 chops designated for an Asian port have softened even further from January's 34-33¢/lb under to 44-41¢/lb under.

And with the readily available material has come quality issues. Some US mills have increased rejections, forcing them to look elsewhere to secure needs.

Dealers are under the impression that consumers are scrutinizing the loads more as business slows and scrap is readily available. Consumers may be more selective with more domestic supply to choose from, but believe that the bigger issue is that lesser quality chops that had gone overseas are now trying to find a home in the US along with the new choppers that are still trying to get the process down.

"New chopping lines…are finding out the hard way that making perfect brass mill chops is not so easy," a scrap broker said. "In some cases, the scrap companies have already thrown in the towel."

Chopping for China

North American wire and cable processors traditionally concentrated on recycling higher-quality copper chops scrap into even higher-copper content material in the last two decades as the lower grades were exported to China.

Lately, China has moved to restrict or ban some forms of scrap from entering its borders, so dealers have looked for new domestic homes or are refining the scrap to a cleaner form in order to sell to Chinese customers.

At the start of 2019, China imposed a ban on imports of "category 7" scrap metals as part of an environmental-friendly policy designed to reduce pollution. The banned category includes copper cable, halting the flow of that material, which is comprised of tightly wound threads of wire, to the world's largest scrap metal consumer and leading to rising stockpiles in the US.

US copper scrap exports to China continue to decline amid tariffs and stricter quality standards from the major consumer. June exports to China fell by 40pc year over year to 8,538t, according to the latest trade data from the US Commerce Department.

China's restrictions forced US scrap dealers to reassess their options when figuring out how to clean up scrap for a wider audience. This included smaller dealers buying equipment to produce chops, which are chopped-up wire strands, for the first time and upgrading copper by getting rid of insulation and plastic from the abundant insulated copper wire (ICW) that is now harder to export.

One of the key drivers for the investment into wire chopping is speculation that China could re-categorize chops as a raw material as opposed to scrap or "solid waste" as per the Chinese central authority's current definition. If this re-categorization takes place, there would be no restriction on China's imports of chops.

More to come?

Copper chops are made to remelt and be used as an addition for casting copper bearing alloys and provides a higher copper content re-melt recovery rate. Higher quality and heavier gauge chops can also be used to replace copper cathodes at a discount and may make international consumers able to take the converted form of the banned ICW.

Chopping and separation equipment is costly, as each new line can run into several million dollars, leaving little margin for error for dealers looking to profitably transform the scrap to a higher quality material — particularly as processors face weak prices for most nonferrous and ferrous scrap grades.

The cost of converting copper wire and cable varies depending on what goes into the chopping line. The lower the grade, the more time it takes to process and adding costs to convert the material.

Despite the issues that yards need to work through, participants believe that more chopping lines will be added because of the fundamental shift in buying from China.

"A few people have tried it, failed and sold out," a dealer said. "But I think there are twice as many chopping lines from five years ago with more on the way."


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/24

Europe plate: Imports weigh on EU prices

Europe plate: Imports weigh on EU prices

London, 28 March (Argus) — Plate prices in Europe tumbled this week on increased import activity, which has pushed European producers to adjust their offers down to remain competitive. The Argus fortnightly Italian plate assessment dropped by €22.50/t to €730/t ex-works today for S235 grades, while the northwest European plate assessment for the same specifications also dropped by €15/t to €765/t. In the south, for S275 material, re-rollers were heard quoting €740-750/t to small customers, with €720-730/t possible for larger volumes. The market remained split between suppliers willing to drop to the low €700s/t to collect orders, and others that preferred to remain firm at €740-750/t and wait for after the Easter holidays to see how the market develops. Two re-rollers confirmed this week that they are mulling extending their Easter break by a few days owing to weak purchasing activity in the market. The level of €710/t ex-works for S275 was also reported available for orders of 1,000t and above, but this could not be verified. Buying activity over the past two weeks remained poor, as market participants are purchasing what they need with no restocking activity occurring. A slight drop in slab prices has contributed to lower plate prices. Deliveries for the Italian domestic market remain for late April for commodity grades. To the rest of Europe, Italian producers were heard offering around €750/t on a ex-works basis for S235 material, without collecting any tonnage. One source said there were offers as high as €760-770/t ex-works Italy. In northern Europe, one mill was reported concluding sales to end-users working in the shipbuilding industry at €750-770 ex-works for S355 grades. The same producer tabled offers at around €780/t, but was quick to offer discounts. Orders from the supplier are expected to be delivered in six to seven weeks. One source estimated that for S235, integrated mills would be offering close to €780-800/t ex-works, while from re-rollers located in the Benelux area €750/t ex-works for the same grade could be easily achieved. One central European mill was also heard available to sell at €790-810/t ex-works for S235. Producers in the northwest are operating on April to May delivery depending on the mill and the product requested. Market participants agree that a rebound in market activity is only expected towards the latter part of April. On imports, over the past couple of weeks, Indonesian material was purchased by buyers across the continent, especially in southern Europe at €640/t cif levels for S275. One source estimated that sales from Indonesia totalled close to 60,000t over the past month. After this activity, Indonesian material was not reported available over the past seven days. One deal was also concluded this week at €710/t cfr north EU, for South Korean S355 material. From South Korea, offers for S275 were estimated over the €660/t cif Italy level this week, with no deals concluded. Indian material was offered at $710-720/t cfr Italy for S275, while one trader offered the same origin from port, free on truck at €730/t for S355. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

Turkey rebar: Market muted ahead of elections


28/03/24
News
28/03/24

Turkey rebar: Market muted ahead of elections

London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Taiwan scrap imports fall 13pc on year in February


28/03/24
News
28/03/24

Taiwan scrap imports fall 13pc on year in February

Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s SMM eyes Li-ion battery recycling plant by 2026


28/03/24
News
28/03/24

Japan’s SMM eyes Li-ion battery recycling plant by 2026

Tokyo, 28 March (Argus) — Japanese battery cathode producer Sumitomo Metal Mining (SMM) plans to set up a lithium-ion (Li-ion) battery recycling plant in western Japan's Ehime prefecture by June 2026. The recycling plant is expected to have a processing capacity of around 6,000-7,000 t/yr of black mass, equivalent to batteries for around 60,000 electric vehicles, a company representative told Argus on 28 March. Black mass is the shredded remains of cathode materials such as nickel, cobalt and lithium. The company will start construction sometime during March-April 2025, but the timing for commercial operations was undisclosed. SMM has also entered into a partnership with nine domestic recycling partners to build a supply chain for collecting used Li-ion batteries, the company representative added. SMM produced cathodes using nickel and cobalt from recycled Li-ion batteries in June 2023. Domestic battery producer Prime Earth EV Energy proved the quality of SMM's used cathodes in performance testing. The recycled ratio of nickel and cobalt used in the test was more than 6pc and 16pc respectively. This exceeds the standard rates that EU battery regulations tentatively set as minimum recycling requirements for each material, a SMM representative previously told Argus . The EU regulation is expected to take effect from 2031 after approvals by member countries. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Centaurus' Jaguar Ni mine in Brazil eyes 2027 output


28/03/24
News
28/03/24

Centaurus' Jaguar Ni mine in Brazil eyes 2027 output

Singapore, 28 March (Argus) — Australian mining company Centaurus Metals said that its Jaguar nickel sulphide project in Brazil is undergoing a feasibility study and aims to start production in mid-2027. Jaguar, bought from Brazilian mining firm Vale in 2020 , is estimated to hold 109mn t of 0.87pc grade nickel for an estimated 948,900t of contained nickel. The nickel product will be largely targeted at the Atlantic market, with expectations that demand will strengthen in the region. "Demand for nickel we believe is not going away. And if you look at what's going to happen in the US and European markets in particular, nickel will probably be a bigger part of the battery composition than anywhere else," Centaurus' managing director Darren Gordon said at the Tribeca Futures Commodities conference held in Singapore on 26 March. "There's a huge amount of nickel that still needs to come into the market." Many Australian mining firms have struggled with a slump in global nickel prices earlier in the year because of a supply glut caused by increased volumes from Indonesia, coupled with a slowdown in demand. Several Australian mines have halted operations , while other processing facilities were placed on care and maintenance programmes . But Centaurus is hopeful that Jaguar will be able to compete on a cost and environmental basis with Indonesian supplies. "Nickel is going to continue be supplied out of Indonesia in very large ways so we are going to compete on costs. And we think that when we deliver the feasibility study, we will be able to demonstrate that we can compete on costs. But overlay on that, we have this very low carbon footprint associated with our project," Gordon added. Centaurus said Jaguar is one of the lowest carbon footprint nickel project globally, following a review done by a metals and mining ESG research company. Once operational, greenhouse gas emissions from the project are forecast to be 7.27t of carbon dioxide/t of nickel equivalent, which is assessed to be lower than 94pc of other global nickel production. By Sheih Li Wong Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more