US steel industry reels from uncertainty
Just a year after booming profits and mill restarts in the US steel industry on the heels of President Donald Trump's imposition of steel tariffs, a prevailing wind of uncertainty has led to lower demand, prices and expected earnings for domestic steelmakers for the rest of 2019.
The fortunes of steelmakers in 2019 have reversed from the heady days of 2018, when Nucor and Steel Dynamics (SDI) had record profits and US Steel brought in more than $1.1bn, almost triple what it made in 2017. That was after the US levied tariffs of 25pc on steel imports, largely taking aim at China, and boosting US steel prices by more than 50pc through July last year from a year earlier.
By the end of 2018 US Steel had restarted two shuttered blast furnaces, Nucor and SDI were preparing to announce investments in new steel mills and hot-rolled coil (HRC) prices hovered in the mid-$700s/st, down from the peak of more than $900/st recorded in mid-2018, but higher than prices HRC sold for in most of 2017.
Now oversupply of US production, lagging demand and low prices are weighing on the profits of major US steelmakers, with Nucor, SDI and US Steel all saying that falling prices will squeeze their third quarter earnings compared to 2018. Pennsylvania-based US Steel said this week that it plans to keep two furnaces it shuttered in July closed for the rest of the year due to market conditions.
The news comes just weeks after many market participants from steel service centers meeting in Atlanta for a major industry event said near-term prices are expected to sag for the rest of the year.
Economic indicators show that the US economy is slowing, with the Institute for Supply Manufacturing (ISM) factory purchasing managers' activity index falling to 49.1 in August from 51.2 in July, showing a contraction in factory activity for the first time since 2016 as the escalating trade war with China is impacting US manufacturing. Growth in gross domestic product (GDP) is slowing, as is new hiring in the US. The Federal Reserve has cut its key lending rate twice in two months, its first cuts since 2008 as a form of "insurance" to maintain the US expansion in the face of global headwinds, mainly stemming from the trade war with China.
One of the key markers the market has been looking at is automobile sales, with many seeing lower sales compared to last year's 17.3mn vehicles. Sales have been slowing and were running at a 17mn unit annual pace in August.
Falling imports into the US as a result of the Section 232 tariff on steel have failed to prop up prices. For the first half of the year imports declined by 13pc to 14.2mn t compared to 16.2mn t in the first six months of 2018, according to the US Department of Commerce. The Trump administration imposed 25pc steel tariffs on imports from all countries except for Australia, Canada, and Mexico, while Argentina, Brazil, and South Korea negotiated nontariff import quotas.
Meanwhile, the global steel market has exhibited weakness, with India leading the decline in steel pricing due to a sluggish domestic market, in turn sending material from India into other markets and driving down prices globally.
Steel prices in the US have fallen since the beginning of 2019, with the Argus weekly domestic US HRC index down by 23pc to $566.25/st. The Metals Service Center Institute (MSCI) said on Tuesday that steel shipments declined for the 10th consecutive month in the US and for the 13th consecutive month in Canada. US service center steel shipments in August fell by 13pc from August 2018.
Major service center Ryerson's chief executive Ed Lehner said at the August meeting in Atlanta that he expects steel prices in 2019 to fall to $550/st, a figure that is 3pc lower than this week's Argus HRC weekly domestic index price.
Integrated steelmaker US Steel said Wednesday that it expects its flat-rolled product shipments to total 10.7mn st this year, down from a prior outlook of 11mn st.
Electric arc furnace (EAF) steelmaker Nucor said lower demand from automotive, agricultural products and power transmission markets will weigh on its steel mill segment's performance in the third quarter.
Indiana-based SDI said fewer shipments and lower average pricing in the third quarter will impact its steel sheet operations compared to the second quarter, outweighing the benefits from falling scrap prices, strong demand from the construction industry and steady demand from other sectors.
Related news posts
Turkey rebar: Market muted ahead of elections
Turkey rebar: Market muted ahead of elections
London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Taiwan scrap imports fall 13pc on year in February
Taiwan scrap imports fall 13pc on year in February
Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s SMM eyes Li-ion battery recycling plant by 2026
Japan’s SMM eyes Li-ion battery recycling plant by 2026
Tokyo, 28 March (Argus) — Japanese battery cathode producer Sumitomo Metal Mining (SMM) plans to set up a lithium-ion (Li-ion) battery recycling plant in western Japan's Ehime prefecture by June 2026. The recycling plant is expected to have a processing capacity of around 6,000-7,000 t/yr of black mass, equivalent to batteries for around 60,000 electric vehicles, a company representative told Argus on 28 March. Black mass is the shredded remains of cathode materials such as nickel, cobalt and lithium. The company will start construction sometime during March-April 2025, but the timing for commercial operations was undisclosed. SMM has also entered into a partnership with nine domestic recycling partners to build a supply chain for collecting used Li-ion batteries, the company representative added. SMM produced cathodes using nickel and cobalt from recycled Li-ion batteries in June 2023. Domestic battery producer Prime Earth EV Energy proved the quality of SMM's used cathodes in performance testing. The recycled ratio of nickel and cobalt used in the test was more than 6pc and 16pc respectively. This exceeds the standard rates that EU battery regulations tentatively set as minimum recycling requirements for each material, a SMM representative previously told Argus . The EU regulation is expected to take effect from 2031 after approvals by member countries. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Centaurus' Jaguar Ni mine in Brazil eyes 2027 output
Centaurus' Jaguar Ni mine in Brazil eyes 2027 output
Singapore, 28 March (Argus) — Australian mining company Centaurus Metals said that its Jaguar nickel sulphide project in Brazil is undergoing a feasibility study and aims to start production in mid-2027. Jaguar, bought from Brazilian mining firm Vale in 2020 , is estimated to hold 109mn t of 0.87pc grade nickel for an estimated 948,900t of contained nickel. The nickel product will be largely targeted at the Atlantic market, with expectations that demand will strengthen in the region. "Demand for nickel we believe is not going away. And if you look at what's going to happen in the US and European markets in particular, nickel will probably be a bigger part of the battery composition than anywhere else," Centaurus' managing director Darren Gordon said at the Tribeca Futures Commodities conference held in Singapore on 26 March. "There's a huge amount of nickel that still needs to come into the market." Many Australian mining firms have struggled with a slump in global nickel prices earlier in the year because of a supply glut caused by increased volumes from Indonesia, coupled with a slowdown in demand. Several Australian mines have halted operations , while other processing facilities were placed on care and maintenance programmes . But Centaurus is hopeful that Jaguar will be able to compete on a cost and environmental basis with Indonesian supplies. "Nickel is going to continue be supplied out of Indonesia in very large ways so we are going to compete on costs. And we think that when we deliver the feasibility study, we will be able to demonstrate that we can compete on costs. But overlay on that, we have this very low carbon footprint associated with our project," Gordon added. Centaurus said Jaguar is one of the lowest carbon footprint nickel project globally, following a review done by a metals and mining ESG research company. Once operational, greenhouse gas emissions from the project are forecast to be 7.27t of carbon dioxide/t of nickel equivalent, which is assessed to be lower than 94pc of other global nickel production. By Sheih Li Wong Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more