Viewpoint: Taiwan scrap headwinds persist in 2020

  • Market: Metals
  • 06/01/20

The price outlook for 2020 in Asia's benchmark containerised ferrous scrap market Taiwan is notably less optimistic than in global bulk market leader Turkey, reflecting the extent to which Asian and Atlantic scrap trends are increasingly diverging.

The Argus containerised HMS 1/2 80:20 cfr Taiwan assessment averaged $256.22/t in 2019, down by 22.1pc from the 2018 average of $328.84/t. This assessment was changed to publish daily from weekly on 2 September 2019 because of increased trading activity in the market.

This rate of decrease in the Taiwan containerised scrap import price significantly exceeded the rate of decline in the global seaborne reference — the Turkish deep-sea import price. The Argus daily HMS 1/2 80:20 cfr Turkey assessment fell by 15.8pc on the year to average $286.10/t in 2019.

The spread between the two markets widened in the second half of 2019 as Taiwanese buyers accepted a far smaller price recovery in imported scrap compared with their Turkish counterparts. This is because Taiwanese mills faced stronger pressure from imported steel and a sharp fall in exported volumes.

Taiwan's imports of long steel products were down by 1.85pc on the year in January-October, which was below the 2.5pc fall in its crude steel production, suggesting a gain in market share by imported longs. This was further compounded by a sharp decline in Taiwanese long steel exports, by 19.5pc on the year to below 500,000t.

Domestic sales were in no better condition — Taiwanese mills throughout last year frequently complained about a lack of available storage space for finished steel and scrap as they struggled to sell.

A number of market participants suggested that the impending Taiwanese presidential election on 11 January stalled many infrastructure and construction projects. And many of them expect the market to improve after the election as Taiwan's GDP growth is forecast to exceed many of its neighbours in Asia.

Taiwan's directorate general of budget, accounting and statistics in November 2019 raised its forecast for the country's GDP growth for 2020 to 2.72pc from 2.58pc. Forecasts by external analysts such as Standard Chartered Bank were more cautious at 2.2pc, but even that still exceeds Taiwan's neighbours such as Singapore and Hong Kong, where forecasts are for a growth rate of 1.4pc and a contraction of 1.5pc, respectively.

But sectors expected to register strong growth are those that are less steel intensive, such as artificial intelligence, electronics and semi-conductors. Taiwan's steel and machinery industries are still expected to be under pressure from rising protectionism around the world and uncertainty surrounding the US-China trade war, despite a "first phase" trade agreement that is expected to be signed on 15 January.

Revenues from the basic metals, metal products and machine manufacturing industries fell by 5.5pc, 11.2pc and 14.2pc on the year in July-September 2019, Taiwan's department of statistics said.

There is also no guarantee that many large infrastructure projects will kick off immediately after the election as Taiwan's infrastructure system is well developed and the government's prior plans were for few large projects to commence in 2020, although the two leading presidential candidates, Tsai Ing-wen and Han Kuo-yu, both suggested that they will increase investment in infrastructure once elected. But the impact of any new investment is likely to be seen in the latter part of 2020 at the earliest.

Tsai promoted the Forward-looking Infrastructure Development Programme in 2017 and budgeted 222.9bn New Taiwan dollars ($7.42bn) for the second phase running from 2019 to 2020. The programme will provide funding for eight categories including railway projects, green energy infrastructure and digital infrastructure. While Tsai will aim to advance this programme if she is re-elected, Han listed six tasks in his infrastructure manifesto, which includes scrapping the Kaohsiung International Airport expansion project and relocating it elsewhere.

The return of businesses from China because of the US-China trade war may drive private construction up as it will require new offices and factories. But this increase in steel consumption is not sufficient to absorb the additional volumes available because of the lack of exports and increasingly competitive seaborne offers of finished and semi-finished steel products.

Against this backdrop, the Taiwanese steel market will be challenging this year, which will in turn put pressure on containerised ferrous scrap import prices.

By Chi Hin Ling


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/24

Crane barge arriving at Baltimore bridge tonight

Crane barge arriving at Baltimore bridge tonight

Houston, 28 March (Argus) — The first major piece of equipment capable of beginning to clear the blocked Port of Baltimore, Maryland, is expected to arrive onsite tonight. The Chesapeake 1000 crane barge, capable of lifting 1,000 short tons with its a 231ft-long boom, is expected to arrive at the site of the collapsed Francis Scott Key Bridge near Baltimore at 11pm ET on 28 March, the US Coast Guard (USCG) told Argus . Both the crane and the tug pulling it, Atlantic Enterprise , are owned by Donjon Marine. It is currently the only crane on route to the collapsed bridge, the USCG said. There is no official timetable for the reopening of the port after the Interstate 695 highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. The operator of the ship, Maersk, has contracted with marine salvage company Resolve Marine to refloat the vessel and remove it from the area, according to the USCG. It is not clear who has contracted for the Chesapeake 1000. Despite the inbound crane, it could take weeks or even months to clear debris and reopen the waterway under the collapsed bridge according to a engineering professor at the nearby Johns Hopkins University. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

'Weeks, months' to reopen Baltimore waterway: professor


28/03/24
News
28/03/24

'Weeks, months' to reopen Baltimore waterway: professor

Houston, 28 March (Argus) — It could take weeks or even months to clear debris and reopen the waterway under the collapsed Francis Scott Key Bridge in Baltimore, Maryland, according to a engineering professor at the nearby Johns Hopkins University. As of Wednesday, there was no official timetable for the reopening of the Port of Baltimore after a major highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. "I'd be shocked if it's weeks, but I don't think it'll take even a year" to clear the waterway, structural engineer and Johns Hopkins professor Benjamin Schafer said Wednesday. He expects the rebuild of the bridge to take significantly longer. "I've lived through quite a few civil infrastructure projects and they're rarely less than 10 years. So I think that's what we're looking at," Schafer said. He noted that it took five years to build the original Francis Scott Key Bridge and seven years to repair the Sunshine Skyway Bridge in Tampa Bay, Florida, after a similar collapse in 1980. Still, "this is definitely not a national supply chain crisis," John Hopkins operations management professor Tinglong Dai said Wednesday. "The effect will be mostly local, mostly minimal and mostly temporary." The bridge collapse and port closure is also unlikely to trigger a global supply chain crisis, he said. The Port of Baltimore is an important but "niche" port specializing in automobile imports and exports, Dai added. "The supply chain has evolved...I have already seen a lot of rerouting happening." Automakers started adjusting their supply routes away from the top port for US vehicle imports the day of the collapse, including General Motors, Ford and Mercedes-Benz. Baltimore is also a major port for coal exports, which may start to shift to terminals to the south in Hampton Roads, Virginia. Freight rates for ships that carry coal could see increases in global markets Other commodities like asphalt and caustic soda that move through the port will see challenges, while organic agriculture imports may see less problems due to seasonal flows. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Europe plate: Imports weigh on EU prices


28/03/24
News
28/03/24

Europe plate: Imports weigh on EU prices

London, 28 March (Argus) — Plate prices in Europe tumbled this week on increased import activity, which has pushed European producers to adjust their offers down to remain competitive. The Argus fortnightly Italian plate assessment dropped by €22.50/t to €730/t ex-works today for S235 grades, while the northwest European plate assessment for the same specifications also dropped by €15/t to €765/t. In the south, for S275 material, re-rollers were heard quoting €740-750/t to small customers, with €720-730/t possible for larger volumes. The market remained split between suppliers willing to drop to the low €700s/t to collect orders, and others that preferred to remain firm at €740-750/t and wait for after the Easter holidays to see how the market develops. Two re-rollers confirmed this week that they are mulling extending their Easter break by a few days owing to weak purchasing activity in the market. The level of €710/t ex-works for S275 was also reported available for orders of 1,000t and above, but this could not be verified. Buying activity over the past two weeks remained poor, as market participants are purchasing what they need with no restocking activity occurring. A slight drop in slab prices has contributed to lower plate prices. Deliveries for the Italian domestic market remain for late April for commodity grades. To the rest of Europe, Italian producers were heard offering around €750/t on a ex-works basis for S235 material, without collecting any tonnage. One source said there were offers as high as €760-770/t ex-works Italy. In northern Europe, one mill was reported concluding sales to end-users working in the shipbuilding industry at €750-770 ex-works for S355 grades. The same producer tabled offers at around €780/t, but was quick to offer discounts. Orders from the supplier are expected to be delivered in six to seven weeks. One source estimated that for S235, integrated mills would be offering close to €780-800/t ex-works, while from re-rollers located in the Benelux area €750/t ex-works for the same grade could be easily achieved. One central European mill was also heard available to sell at €790-810/t ex-works for S235. Producers in the northwest are operating on April to May delivery depending on the mill and the product requested. Market participants agree that a rebound in market activity is only expected towards the latter part of April. On imports, over the past couple of weeks, Indonesian material was purchased by buyers across the continent, especially in southern Europe at €640/t cif levels for S275. One source estimated that sales from Indonesia totalled close to 60,000t over the past month. After this activity, Indonesian material was not reported available over the past seven days. One deal was also concluded this week at €710/t cfr north EU, for South Korean S355 material. From South Korea, offers for S275 were estimated over the €660/t cif Italy level this week, with no deals concluded. Indian material was offered at $710-720/t cfr Italy for S275, while one trader offered the same origin from port, free on truck at €730/t for S355. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Turkey rebar: Market muted ahead of elections


28/03/24
News
28/03/24

Turkey rebar: Market muted ahead of elections

London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Taiwan scrap imports fall 13pc on year in February


28/03/24
News
28/03/24

Taiwan scrap imports fall 13pc on year in February

Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more