EU HRC: Higher offers bolster market

  • Market: Metals
  • 21/01/20

The northwest European hot-rolled coil (HRC) market continues to advance, with the vast majority of mills maintaining their offers at higher levels.

Argus' daily northwest Europe HRC index rose by €1/t today to €455.25/t ex-works, taking the monthly average to €443.37/t. The daily Italian index increased by another €2.25/t today to €444.25/t ex-works, as the differential narrowed to €11/t.

Service centres have paid €30/t plus for HRC compared with December, although some are not desperate to buy after locking in sufficient material in their quarterly and half-yearly contracts. Most mills are now quoting for late March-April deliveries, and strong import offers continue to support their expectations.

Import offers are around €470-480/t cfr Antwerp, which justifies the €500/t ex-works plus offers being tabled by some mills. One mill is telling the market it is booked out into June, while ArcelorMittal has informed customers it will be relining blast furnace B at its Ghent works in Belgium in September — while this is some way off, the mill will have to stockpile slab ahead of the refurbishment, which will reduce supply it can sell into the market.

Service centres cite brisker demand, and even some automotive suppliers maintain that trade is brisker now the destocking of 2019 is out of the way. The realignment of apparent and real demand is one of the primary drivers of the current uptick in pricing, with decoilers looking to restock.

Steelmakers suggest big buyers with more exposure to the international market are realising they will pay more, and as a result are placing volumes domestically because imports are too expensive. This is helping to nudge out lead times, reducing the urgency of mills to sell.

Given the apparent tightness, Argus assessed the northwest European February forward market at €465/t, up by €5/t, while March was assessed up by the same amount to €472.50/t.

That said, some still question the extent of the recovery in real demand, and mills are still cautious about the situation of their domestic rivals given how ruthlessly they competed for tonnage last year.

Italian producers are also being cautious, carefully evaluating their own offers and keeping a close eye on the import market to prevent Turkish mills from gaining more market share, should local Italian prices rise too quickly.

There is chatter of concluded deals into south Europe at $495-505/t fob Turkey last week, but small quantity offers are being kept at $510-515/t fob. This is still a reduction in comparison with offers made at the beginning of the month, when the lowest available level was $520/t fob, but the producers are making a healthy margin even at sales of around $500/t fob. Traders reported an offer for Indian HRC at €485/t cfr and for South Korean cold-rolled coil (CRC) at €570-580/t cfr Europe.

Turkish scrap prices are showing signs of weakness, with the Argus HMS 80:20 assessment down by $5.50/t on the day yesterday to $282.50/t cfr. Many expect the downtrend to continue in the next few weeks, which is likely to pressure coil pricing out of Turkey, depending on domestic flats demand. The approach of the lunar new year in China this weekend implies that should some buyers need material, they may wait for after the holidays, while traders speculate on the price direction during the country's absence.

Yet Italian market participants still anticipate a further increase in local pricing in the coming weeks, although some producers see resistance and have readjusted their expectations. Mills have already managed to achieve increases of as much as €20-30/t compared with December pricing, but the limit may be nearer than previously thought. ArcelorMittal's plan to shut down steel shop 1 at Taranto in Italy from 23 January until 31 March may provide some leverage, although it could see the producer struggle to raise prices again, as buyers deem its offering risky.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/24

Crane barge arriving at Baltimore bridge tonight

Crane barge arriving at Baltimore bridge tonight

Houston, 28 March (Argus) — The first major piece of equipment capable of beginning to clear the blocked Port of Baltimore, Maryland, is expected to arrive onsite tonight. The Chesapeake 1000 crane barge, capable of lifting 1,000 short tons with its a 231ft-long boom, is expected to arrive at the site of the collapsed Francis Scott Key Bridge near Baltimore at 11pm ET on 28 March, the US Coast Guard (USCG) told Argus . Both the crane and the tug pulling it, Atlantic Enterprise , are owned by Donjon Marine. It is currently the only crane on route to the collapsed bridge, the USCG said. There is no official timetable for the reopening of the port after the Interstate 695 highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. The operator of the ship, Maersk, has contracted with marine salvage company Resolve Marine to refloat the vessel and remove it from the area, according to the USCG. It is not clear who has contracted for the Chesapeake 1000. Despite the inbound crane, it could take weeks or even months to clear debris and reopen the waterway under the collapsed bridge according to a engineering professor at the nearby Johns Hopkins University. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

'Weeks, months' to reopen Baltimore waterway: professor


28/03/24
News
28/03/24

'Weeks, months' to reopen Baltimore waterway: professor

Houston, 28 March (Argus) — It could take weeks or even months to clear debris and reopen the waterway under the collapsed Francis Scott Key Bridge in Baltimore, Maryland, according to a engineering professor at the nearby Johns Hopkins University. As of Wednesday, there was no official timetable for the reopening of the Port of Baltimore after a major highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. "I'd be shocked if it's weeks, but I don't think it'll take even a year" to clear the waterway, structural engineer and Johns Hopkins professor Benjamin Schafer said Wednesday. He expects the rebuild of the bridge to take significantly longer. "I've lived through quite a few civil infrastructure projects and they're rarely less than 10 years. So I think that's what we're looking at," Schafer said. He noted that it took five years to build the original Francis Scott Key Bridge and seven years to repair the Sunshine Skyway Bridge in Tampa Bay, Florida, after a similar collapse in 1980. Still, "this is definitely not a national supply chain crisis," John Hopkins operations management professor Tinglong Dai said Wednesday. "The effect will be mostly local, mostly minimal and mostly temporary." The bridge collapse and port closure is also unlikely to trigger a global supply chain crisis, he said. The Port of Baltimore is an important but "niche" port specializing in automobile imports and exports, Dai added. "The supply chain has evolved...I have already seen a lot of rerouting happening." Automakers started adjusting their supply routes away from the top port for US vehicle imports the day of the collapse, including General Motors, Ford and Mercedes-Benz. Baltimore is also a major port for coal exports, which may start to shift to terminals to the south in Hampton Roads, Virginia. Freight rates for ships that carry coal could see increases in global markets Other commodities like asphalt and caustic soda that move through the port will see challenges, while organic agriculture imports may see less problems due to seasonal flows. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Europe plate: Imports weigh on EU prices


28/03/24
News
28/03/24

Europe plate: Imports weigh on EU prices

London, 28 March (Argus) — Plate prices in Europe tumbled this week on increased import activity, which has pushed European producers to adjust their offers down to remain competitive. The Argus fortnightly Italian plate assessment dropped by €22.50/t to €730/t ex-works today for S235 grades, while the northwest European plate assessment for the same specifications also dropped by €15/t to €765/t. In the south, for S275 material, re-rollers were heard quoting €740-750/t to small customers, with €720-730/t possible for larger volumes. The market remained split between suppliers willing to drop to the low €700s/t to collect orders, and others that preferred to remain firm at €740-750/t and wait for after the Easter holidays to see how the market develops. Two re-rollers confirmed this week that they are mulling extending their Easter break by a few days owing to weak purchasing activity in the market. The level of €710/t ex-works for S275 was also reported available for orders of 1,000t and above, but this could not be verified. Buying activity over the past two weeks remained poor, as market participants are purchasing what they need with no restocking activity occurring. A slight drop in slab prices has contributed to lower plate prices. Deliveries for the Italian domestic market remain for late April for commodity grades. To the rest of Europe, Italian producers were heard offering around €750/t on a ex-works basis for S235 material, without collecting any tonnage. One source said there were offers as high as €760-770/t ex-works Italy. In northern Europe, one mill was reported concluding sales to end-users working in the shipbuilding industry at €750-770 ex-works for S355 grades. The same producer tabled offers at around €780/t, but was quick to offer discounts. Orders from the supplier are expected to be delivered in six to seven weeks. One source estimated that for S235, integrated mills would be offering close to €780-800/t ex-works, while from re-rollers located in the Benelux area €750/t ex-works for the same grade could be easily achieved. One central European mill was also heard available to sell at €790-810/t ex-works for S235. Producers in the northwest are operating on April to May delivery depending on the mill and the product requested. Market participants agree that a rebound in market activity is only expected towards the latter part of April. On imports, over the past couple of weeks, Indonesian material was purchased by buyers across the continent, especially in southern Europe at €640/t cif levels for S275. One source estimated that sales from Indonesia totalled close to 60,000t over the past month. After this activity, Indonesian material was not reported available over the past seven days. One deal was also concluded this week at €710/t cfr north EU, for South Korean S355 material. From South Korea, offers for S275 were estimated over the €660/t cif Italy level this week, with no deals concluded. Indian material was offered at $710-720/t cfr Italy for S275, while one trader offered the same origin from port, free on truck at €730/t for S355. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Turkey rebar: Market muted ahead of elections


28/03/24
News
28/03/24

Turkey rebar: Market muted ahead of elections

London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Taiwan scrap imports fall 13pc on year in February


28/03/24
News
28/03/24

Taiwan scrap imports fall 13pc on year in February

Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more