Latest Market News

Kidman, SQM confirm lithium hydroxide potential

  • Spanish Market: Metals
  • 22/10/18

Joint-venture partners Australia's Kidman Resources and Chile's Sociedad Quimica y Minera de Chile (SQM) are contemplating the production of 45,254 t/yr of battery-grade lithium hydroxide from a refinery they are planning to establish at Kwinana, south of Perth.

A pre-feasibility study and updated scoping study have indicated that an integrated mine, concentrator and refinery can be developed at a capital cost of $601mn to generate life of project revenue of around $33.5bn over a period of 47 years, Kidman said.

Cash costs are estimated at $4,487/t with lithium hydroxide prices estimated at $14,074/t for the first 10 years and $15,115/t for the life of the project.

The studies are based on 315,000 t/yr of lithium concentrate grading 6.2pc lithium oxide being transported to the refinery from the Earl Grey mine, which forms part of the integrated development.

Average project value is estimated at $713 mn/yr with a post-tax net present value of $2.3bn and a payback period of three years. Development costs will be shared by Kidman and SQM on a 50:50 basis.

Kidman and SQM have formed a new company, Covalent Lithium, to manage the mine and concentrator to be built at the Earl Grey mine and the proposed refinery. An investment decision on the integrated development is expected in the first half of 2019.

"This marks an important milestone in our project to deliver a long-life vertically integrated mine-to-refinery operation in Western Australia (WA). Covalent Lithium will be a producer of premium battery-grade lithium hydroxide, which will be a competitive advantage for Kidman's marketing activities both now and into the future," managing director Martin Donohue said.

Kidman has already entered into a three-year offtake agreement with electric vehicle producer Tesla for 25pc of its share of lithium hydroxide output and is continuing negotiations with other potential partners for the remaining 75pc of its share.

Kidman and SQM are seeking an exemption from the WA mines minister from their obligations to fulfil minimum tenement expenditure at the Earl Grey mining site. If this exemption is not granted, it could delay the timing of the project's development, Kidman said.

It is estimated that the WA government will receive mining royalties of around A$1.7bn ($1.2bn) over the life of the integrated mining and refinery project.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

19/09/24

UK's RJH ceases trading, merges with Amalgamet

UK's RJH ceases trading, merges with Amalgamet

London, 19 September (Argus) — London-based minor metals firm RJH Trading (RJH) will cease its trading operations and all business will be transferred to Amalgamet Limited, Argus learnt today. Starting from 1 October, Amalgamet — the physical trading arm of non-ferrous metals at UK-based AMC Group — will take over the management of all RJH operations. Amalgamet is hiring the team from RJH, including Charles Swindon, the founder and managing director of RJH and former chairman of the Minor Metals Trade Association (MMTA), who will work as a consultant. Senior RJH traders in Scandinavia and India will trade for Amalgamet. Amalgamet, also headquartered in London, aims to expand further into more high-growth metals and take advantage of trading a greater diversity of metals and concentrates, both parties told Argus . Amalgamet mainly supplies base and minor metals, and through the merger will add new products that RJH has been trading for years including ferro-alloys such as ferro-chrome, ferro-silicon and other minor metals such as magnesium. For several metals including antimony there will be a crossover, as both trading firms have positions in the market. Charles Swindon told Argus the mix of the two portfolios is a good match and added that it is important to spread risk at a moment of geopolitical fragmentation. "This [partnership] brings over 100 years of invaluable trading experience in all metals as well as new opportunities in all parts of the world," he said. The financial details of the transaction have not been disclosed. By Cristina Belda Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

EU HRC market gears up for mill consolidation


19/09/24
19/09/24

EU HRC market gears up for mill consolidation

London, 19 September (Argus) — The European hot-rolled coil (HRC) market is gearing up for potential consolidation over the coming year, as mills grapple with tough market conditions. The share prices of key European producers have rallied in recent days, despite continued weakness in HRC prices. Global steelmaker ArcelorMittal's shares traded above €22/share ($24/share) on the Luxembourg Stock Exchange at 12:30 GMT today, up from €19.70/share on 10 September. This strength is partly attributable to the expected release of economic stimulus measures in China, and the US Federal Reserve's recent interest rate cut, sources suggest. But market strength could also be because of growing talk that a new wave of consolidation is on its way, fuelled by decarbonisation efforts and the strained positions' of some mills. There has long been talk that steel coil producer Tata Steel Netherlands could be sold, after the Dutch state agreed to contribute to its decarbonisation spend. Recent difficulties at Germany's ThyssenKrupp have also sparked suggestions it could be an acquisition target. Czech Republic energy company EP Corporate Group (EPCG) recently completed its purchase of a 20pc stake in ThyssenKrupp's Steel Europe division, and could increase this to 50pc in the near future. EPCG owner Daniel Kretinsky may be seeking a strategic partner to help run the business, sparking talks that other mills could bid for a stake in the company. ThyssenKrupp shares were trading at €3.20/share on Deutsche Borse Xetra at 12:30 GMT today, up from €2.78/share on 10 September. Concerns over strong positions in niche markets, particularly tin plate, saw Tata Steel and Thyssekrupp call off their proposed joint venture in May 2019. But the market is in a different position now. Some mills have reduced capacity but new entrants are trying to join the market as green producers. And the global market is oversupplied, putting European producers in a difficult financial predicament, especially given their capital-intensive efforts to decarbonise. In the case of ThyssenKrupp, expectations that the mill will reduce its production footprint could partially alleviate potential competition concerns in the event of a takeover. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US Fed cuts rate by half point, signals more: Update


18/09/24
18/09/24

US Fed cuts rate by half point, signals more: Update

Adds chairman Powell comments, economic projections. Houston, 18 September (Argus) — The US Federal Reserve cut its target interest rate by 50 basis points today, the first rate cut since 2020, with policymakers signaling they expect to make another half-point worth of cuts by the end of 2024. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.75-5pc from the prior range of 5.25-5.5pc, which was a 23-year high. The Fed had kept the target rate unchanged since July 2023 after hiking it for more than a year in the most intense rate-tightening campaign in four decades to quash inflation, which peaked at 9.1pc in mid-2022. "The committee has gained greater confidence that inflation is moving sustainably toward 2pc, and judges that the risks to achieving its employment and inflation goals are roughly in balance," the FOMC said in its statement after the two-day meeting. "Job gains have slowed, and the unemployment rate has moved up but remains low." In their latest economic projections, the Fed board and policymakers expect the target rate range will end 2024 near a midpoint of 4.4pc compared with an end of year midpoint of 5.1pc projected in June, which implies further cuts amounting to 50 basis points by the end of 2024. Policymakers also penciled in another 100 basis points of cuts over the course of 2025. "We're recalibrating policy down over time to a more neutral level and we're moving at the pace that we think is appropriate given developments in the economy," Fed chair Jerome Powell told a press conference after the meeting. "The economy can develop in a way that will cause us to go faster or slower. The US economy is in a good place and our decision today is designed to keep it there." The Fed's economic projections see core Personal Consumption Expenditures inflation — the Fed's favorite measure of inflation — ending 2024 at a median rate of 2.6pc, down from a prior forecast of 2.8pc. Policymakers see core PCE inflation falling to a median of 2.2pc by the end of next year. The outlook for the unemployment rate for the end of 2024 climbed to 4.4pc from 4pc penciled in at the June meeting. Policymakers expect gross domestic product (GDP) growth to end 2024 at an annual 2pc, slightly down from a prior 2.1pc projection. The latest policy meeting comes as the Consumer Price Index (CPI) eased to an annual 2.5pc in August , down from 2.9pc in July, the Labor Department reported on 11 September. Inflation had ticked up to 3.5pc in March from 3.1pc in January, prompting the Fed to turn more cautious about beginning its rate cuts. US job growth has recently slowed sharply, falling to an average 116,000 in the three months through August from 211,000 for the prior three months. The jobless rate rose to 4.3pc in July, the highest in three years, before edging down to 4.2pc in August. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US Fed cuts rate by half point, signals more to come


18/09/24
18/09/24

US Fed cuts rate by half point, signals more to come

Houston, 18 September (Argus) — The US Federal Reserve cut its target interest rate by 50 basis points today, the first rate cut since 2020, with officials signaling they expect to make another half point worth of cuts by the end of 2024. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.75-5pc from the prior range of 5.25-5.5pc, which was a two-decade high. The Fed had kept the target rate unchanged since July 2023 after hiking it for more than a year in the most aggressive increase campaign in four decades to quash inflation, which peaked at 9.1pc in mid-2022. "The committee has gained greater confidence that inflation is moving sustainably toward 2pc and judges that the risks to achieving its employment and inflation goals are roughly in balance," the FOMC said in its statement after the two-day meeting. "Job gains have slowed, and the unemployment rate has moved up but remains low." The Fed board and policymakers, in their latest economic projections, expect the target rate range will end 2024 near a midpoint of 4.4pc compared with an end of year midpoint of 5.1pc projected in June, which implies further cuts amounting to 50 basis points by the end of 2024. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan's Tokyo Steel cuts sales prices on weak demand


18/09/24
18/09/24

Japan's Tokyo Steel cuts sales prices on weak demand

Shanghai, 18 September (Argus) — Japan's steel manufacturing firm Tokyo Steel said it will cut domestic steel product prices for October, marking the first full-scale price cut in over four years. The decision was driven by sluggish domestic demand and increased competition from cheaper imported steel products. Tokyo Steel will reduce prices across all product lines starting October, with steel coils and plates dropping by ¥15,000/t, shaped beams by ¥12,000/t, and tubes and deformed bars by ¥10,000/t. The company had maintained stable domestic steel prices for an extended period on the back of the steadier domestic demand and market conditions compared to the more volatile overseas market. The last price cut for deformed bars was in July 2023. Steel sales in Japan were weak during the third quarter, impacted by rising procurement costs for materials, a shortage of construction capacity, and an influx of cheaper steel products from China in the seaborne market, market participants said. A decline in profitability pushed Japanese mills to cut production costs. From 11 July to 14 September, domestic scrap prices at Tokyo Steel's Utsunomiya plant dropped by ¥12,500/t, or 23.8pc. Market sentiment in Japan remains bearish due to economic uncertainty and the strengthening of the Japanese yen. The upcoming adjustments in US monetary policy could add further volatility to exchange rates. "We may see more corrections in the Japanese domestic market," a trade source said. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more