Turkish ferrous scrap imports rise sharply in March
Turkey's ferrous scrap import volumes in March almost doubled from February, Turkish customs data show, boosted by the highest demand for the country's finished steel products tracked in 2019 to date.
Turkish scrap imports for March stood at 1.716mn t compared with 936,000t of February imports, up by 83.3pc. March 2019 imports were down slightly compared with March 2018, which stood at 1.837mn t.
Imports of US-origin material were virtually flat on the year, while imports from the Netherlands rose by 117,000t and shipments from Russian fell by 103,000t in the same period.
Turkish steel mills significantly cut production levels in January, with some reducing rebar output by 50pc. This significantly diminished their demand for scrap imports in February, during which time there was no domestic steel demand and no large tonnage overseas demand.
But the limited scrap supply from exporters during winter months combined with the iron supply shock announcement from Brazilian producer Vale at the end of January fuelled expectations that lower raw material availability would drive up steel prices.
This invigorated some Turkish domestic steel demand at the same time as local stockists maintained low stock levels. Even end-users bought into the theory that raw materials could drive steel prices, stockists said at the time.
A growing expectation from Turkish mills that Chinese steel prices would increase significantly during March and April also led them to procure imported scrap volumes for more than just the back-to-back business that they had previously been pursuing. They were correct with their expectations as they later sold large tonnages of rebar and wire rod to southeast Asia for April, May and June shipment.
A Turkish flats producer purchased multiple scrap cargoes at the end of January for six-seven week lead times, for March arrival, reflective of the lead times for hot-rolled coil.
Turkish mills received strong demand from Europe at the end of January and beginning of February as European steel importers looked to secure Turkish material for the 1 April quarterly quota, which allocated 133,000t of rebar to Turkey.
Having bought only 936,000t for February shipment, Turkish mills had to significantly increase their scrap import volumes in March to meet the renewed demand.
Imports of US-origin scrap rose most sharply in March, reaching 335,775t compared with February imports of 185,296t.
Imports of Netherlands-origin material increased, hitting 291,135t in March, up from 115,675t in February.
Imports of Belgium-origin material increased to 174,664t in March from 33,753t in February.
Imports of French-origin material increased to 75,293t in March from 13,634t in February.
UK-origin material more than doubled in terms of Turkish March imports, standing at 211,624t in March, up from 96,997t in February.
Imports of Russian-origin material increased by almost half, reaching 150,795t in March, up from 106,652t in February.
Related news posts
US inflation slows broadly in April
US inflation slows broadly in April
Houston, 15 May (Argus) — US consumer price gains eased in April, with core inflation posting the smallest gain in three years, signs the economy is slowing in the face of high borrowing costs. The consumer price index (CPI) rose by an annual 3.4pc in April, easing from 3.5pc over the prior 12-month period, the Labor Department reported on Wednesday. Core CPI, which strips out volatile food and energy, rose by 3.6pc, slowing from 3.8pc the prior month. The easing inflation comes as the Federal Reserve has pushed back the expected start of interest rate cuts after holding its target rate at a 23-year high since July 2023 as the US economy has continued to grow and generate jobs at greater than expected rates. Job growth however slowed to 175,000 in April, the lowest since October 2023, and job openings and wage gains have also slowed while a measure of manufacturing has contracted. The CME FedWatch tool boosted the probability of Fed rate cuts in September to about 72pc today from about 65pc on Tuesday. The energy index rose by 2.6pc over the 12 months ended in April, accelerating from 2.1pc. The gasoline index slowed to an annual 1.2pc in April from 1.3pc The food index rose by an annual 2.2pc, matching the prior month. Shelter slowed to 5.5pc from 5.7pc. Services less energy services slowed to 5.3pc from 5.4pc. Transportation services accelerated to an annual 11.2pc, led by insurance costs, from 10.7pc in the 12 months through March. On a monthly basis, CPI inflation slowed to 0.3pc in April from 0.4pc the prior two months. Core inflation slowed to 0.3pc from 0.4pc the prior three months. Energy held flat at a monthly 1.1pc. Services less energy services slowed to a monthly 0.4pc gain from 0.5pc. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Liberty looks to sell or recapitalise EU rolling lines
Liberty looks to sell or recapitalise EU rolling lines
London, 15 May (Argus) — Beleaguered steelmaker Liberty Steel is looking to recapitalise or divest its main European rolling lines, the company said today. The lines are Liege in Belgium, Dudelange in Luxembourg and Piombino in Italy, and have a capacity of over 2.5mn t, the company said. Liege and Dudelange galvanise hot-rolled coil (HRC) and produce tinplate and blackplate, Magona produces prepaint and hot-dipped galvanised (HDG) products. "The primary objective is to review options for strategic partnerships through long-term HRC feedstock supply contracts, but will also consider and [sic] co-investment and divestment options," Liberty said. Negotiations over at least one of the assets have been ongoing for a number of months, but have potentially stalled at the contract signing stage, sources suggested this week. The company refused to comment on "speculation". As with Liberty's other EU and UK assets, the lines have not been producing anywhere near full capacity, if at all, for a number of years. They have not been supplied with feedstock from the company's own mills. Galati in Romania is operating, but nowhere near capacity, while Ostrava is rolling limited quantities of imported slab with the aid of third-party financing. As far back as June 2021, Belgium's Walloon government discussed loaning Liberty Steel an undisclosed fee to continue operating Liege-Dudelange, subject to the organisation of a sales procedure being started. Walloon's investment firm Sogepa said the loan would be subject to "strict conditions", including the organisation of a sale, but the loan was not finalised in the end. That same month, Liberty merged the downstream assets of Dudelange, Liege and Piombino into its Galati organisation. At the time the company said this would see Galati become the primary supplier of HRC to the rolling lines. The difficult market environment in Europe is compounding the difficulties faced by Liberty. Last week it mothballed its merchant bar mill in Scunthorpe, UK , as first reported by Argus . In reality, the mill has not produced anything for years. At Liberty's Speciality Steel business in south Yorkshire, UK, around 7,000t has been produced this year, out of nameplate capacity of 1.2mn t/yr. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
VW idles Brazil auto plants as floods hit parts supply
VW idles Brazil auto plants as floods hit parts supply
Sao Paulo, 14 May (Argus) — Persistent heavy rains in Brazil's Rio Grande do Sul led Volkswagen to announce collective vacation for workers in three of its local plants as the automaker struggles with a lack of parts made in the flood-hit state. The Anchieta, Taubate and Sao Carlos facilities, in southeastern Sao Paulo state, will have collective vacation starting 20 May as floods forced auto part suppliers to stop production. "Due to the heavy rains affecting the state and people of Rio Grande do Sul, some Volkswagen do Brasil parts suppliers, with factories installed in the state, are unable to produce at this time," the company said on Tuesday. Volkswagen declined to comment on which auto parts suppliers were affected by the floods. Volkswagen's Sao Jose dos Pinhais facility, in Rio Grande do Sul, will remain operating, the company said. Heavy rains that began flooding Rio Grande do Sul in late April persisted over the weekend , continuing to wreak havoc in the state. Rains reached an accumulated 123mm (4.8in) on 10-12 May in the state capital Porto Alegre, according to Brazil's national meteorological institute Inmet. Some areas experienced around 80mm of rain on 12 May alone, according to the US National Oceanic and Atmospheric Administration. Showers lessened but continued on 13 May, reaching 35mm in some parts of the state. The extreme weather has left 148 dead and 124 missing, according to the civil defense. Over 538,000 people are displaced. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Anglo American to exit from coal, Ni, platinum: Update
Anglo American to exit from coal, Ni, platinum: Update
Adds details of Anglo American's latest plan to demerge or sell its assets Singapore, 14 May (Argus) — UK-South African mining firm Anglo American has announced plans to exit its coal, platinum, nickel and diamond businesses, shortly after rejecting Australian resources firm BHP's latest takeover bid. Anglo American wants to sell its coking coal business in Australia, which includes the 6.5mn t/yr Moranbah and 5mn t/yr Grosvenor mines in Queensland. The firm also plans to demerge Anglo American Platinum, as well as sell or demerge its De Beers diamond business, it said on 14 May. Anglo American will also slow investment in its Woodsmith polyhalite fertilizer project in the UK, where it was previously targeting first commercial output in 2027 . It is also exploring options for care and maintenance as well as divestment of its nickel assets in Brazil. The move to "accelerate the delivery of consistently stronger shareholder returns" with the latest plan comes on the back of a takeover bid by BHP. Anglo American turned down a revised £34bn ($42.7bn) takeover proposal from BHP on 13 May because it "continues to significantly undervalue Anglo American and its future prospects". It earlier rejected BHP's £31bn all-share offer for the same reason. "The latest proposal from BHP again fails to recognise the value inherent in Anglo American," Anglo American chairman Stuart Chambers said on 13 May. Anglo American shareholders are well positioned to benefit from increasing demand from "future-enabling products", Chambers added. Copper was the second-highest contributor to Anglo American's earnings last year, accounting for 32pc of its earnings before interest, taxes, depreciation and amortisation, after iron ore. BHP's latest offer represents a total value of around £27.53 per Anglo American ordinary share, including £4.86 in Anglo Platinum shares and £3.40 in Kumba shares, BHP said on 13 May. The takeover proposal came with a requirement for Anglo American to complete two separate demergers of its entire shareholdings in Anglo American Platinum and Kumba Iron Ore — its assets in South Africa — to Anglo American shareholders. "This leaves Anglo American, its shareholders and stakeholders disproportionately at risk from the substantial uncertainty and execution risk created by the proposed inter-conditional execution of two demergers and a takeover," Anglo American said. By Reena Nathan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more