Australian energy, resources projects delayed
Australian construction and engineering firm Decmil has warned that key construction components and supplies have been delayed or cancelled because of the Covid-19 outbreak, which will delay the development of major resources and energy projects.
The firm also warned that restrictions on travel between Australian states were making it difficult to deliver key skilled personnel into projects in resources-rich states such as Western Australia (WA) and Queensland. It has been two and a half months since WA and Queensland closed their state borders and the federal government imposed a 14-day quarantine at designated hotels for all international arrivals. Ports have remained open with some restrictions around crew leaving vessels, but overseas manufacturers that produce modules for resources and energy projects have curtailed production in response to national and regional Covid-19 rules.
This is extending the lead time for key items and in some cases seeing deliveries cancelled, which is likely to translate into delays for major projects already in construction and could see those in the planning phase shelved.
"The delivery of key supplies and construction components have all been either delayed or cancelled as a result of restricted international trade in light of Covid-19," said Decmil in its prospectus issued to raise A$50mn ($33.7mn). The raising is to shore up the firm's balance sheet as it navigates the current economic climate.
Decmil is involved in several key resources project in Australia, including for Queensland gas producer QGC, Indian energy firm Adani's Carmichael coal project in Queensland, iron ore mining firm Fortescue Metals (FMG), Australian resources firm South32, and WA petroleum and LNG firm Woodside.
The warning from Decmil follows that by UK-Australian mining firm Rio Tinto that supply chain disruptions could delay major projects.
A delay to major projects may be welcome in some oversupplied commodities such as coal and LNG but could put further upward pressure on iron ore prices, already strongly supported by supply disruptions caused by Covid-19.
Rio Tinto, BHP and FMG are all developing major projects to either sustain production levels or add incremental tonnes. BHP's 80mn t/yr South Flank project is due to deliver ore from 2021, while Rio is working on the 43mn t/yr Koodaideri mine, as well as investments at Robe River and Tom Price. FMG plans to deliver first ore from its Eliwana project by December and from the 22mn t/yr Iron Bridge project in 2022.
Uncertainty about whether projects are deliverable in the current global economic climate may lead more firms to shelve projects that are not yet in construction, particularly in oversupplied commodities where companies are looking to curtail output.
Related news posts
G7 countries put timeframe on 'unabated' coal phase-out
G7 countries put timeframe on 'unabated' coal phase-out
London, 30 April (Argus) — G7 countries today committed to phasing out "unabated coal power generation" by 2035 — putting a timeframe on a coal phase-out for the first time. The communique, from a meeting of G7 climate, energy and environment ministers in Turin, northern Italy, represents "an historic agreement" on coal, Canadian environment minister Steven Guilbeault said. Although most G7 nations have set a deadline for phasing out coal-fired power, the agreement marks a step forward for Japan in particular, which had previously not made the commitment, and is a "milestone moment", senior policy advisor at think-tank E3G Katrine Petersen said. The G7 countries are Italy — this year's host — Canada, France, Germany, Japan, the UK and the US. The EU is a non-enumerated member. But the pledge contains a caveat in its reference to "unabated" coal-fired power — suggesting that abatement technologies such as carbon capture and storage could justify its use, while some of the wording around a deadline is less clear. The communique sets a timeframe of "the first half of [the] 2030s or in a timeline consistent with keeping a limit of 1.5°C temperature rise within reach, in line with countries' net-zero pathways". OECD countries should end coal use by 2030 and the rest of the world by 2040, in order to align with the global warming limit of 1.5°C above pre-industrial levels set out in the Paris Agreement, according to research institute Climate Analytics. The countries welcomed the outcomes of the UN Cop 28 climate summit , pledging to "accelerate the phase out of unabated fossil fuels so as to achieve net zero in energy systems by 2050". It backed the Cop 28 goal to triple renewable energy capacity by 2030 and added support for a global target for energy storage in the power sector of 1.5TW by 2030. The group committed to submit climate plans — known as nationally determined contributions (NDCs) — with "the highest possible ambition" from late this year or in early 2025. And it also called on the IEA to "provide recommendations" next year on how to implement a transition away from fossil fuels. The G7 also reiterated its commitment to a "fully or predominantly decarbonised power sector by 2035" — first made in May 2022 and highlighted roles for carbon management, carbon markets, hydrogen and biofuels. Simon Stiell, head of UN climate body the UNFCCC, urged the G7 and G20 countries to lead on climate action, in a recent speech . The group noted in today's outcome that "further actions from all countries, especially major economies, are required". The communique broadly reaffirmed existing positions on climate finance, although any concrete steps are not likely to be taken ahead of Cop 29 in November. The group underlined its pledge to end "inefficient fossil fuel subsidies" by 2025 or earlier, but added a new promise to "promote a common definition" of the term, which is likely to increase countries' accountability. The group will report on its progress towards ending those subsidies next year, it added. Fostering energy security The communique placed a strong focus on the need for "diverse, resilient, and responsible energy technology supply chains, including manufacturing and critical minerals". It noted the important of "guarding against possible weaponisation of economic dependencies on critical minerals and critical raw materials" — many of which are mined and processed outside the G7 group. Energy security held sway on the group's take on natural gas. It reiterated its stance that gas investments "can be appropriate… if implemented in a manner consistent with our climate objectives" and noted that increased LNG deliveries could play a key role. By Georgia Gratton Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher C919 adoption to boost China's Ti demand
Higher C919 adoption to boost China's Ti demand
Beijing, 30 April (Argus) — Higher adoption of the C919 airliner, China's first self-developed single-aisle passenger jet, is likely to boost demand for titanium mill products in the coming years, according to market participants. China Southern Airlines, one of the country's top three airlines, ordered 100 C919 aircraft from its manufacturer Commercial Aircraft Corporation of China (Comac) yesterday. These aircraft will be delivered in 2024-2031. China's flag carrier Air China on 26 April also announced that it will purchase 100 C919 aircraft from Comac during the same period. Another major airline, China Eastern Airlines, in September 2023 placed an order for 100 C919 aircraft from Comac, which delivered the fifth unit this March. This means all three top China airlines have invested in 100 aircraft deals for C919. Market participants estimate a single C919 aircraft contains 3.92t of titanium mill products. Demand for titanium mill products from a single C919 aircraft will reach 49t based on an overall yield rate of 8pc for mill products used in aviation parts. Titanium mill products typically include titanium strip, rod, section bar, wire, plate, sheet, tap and foil. Comac launched the C919 development programme in 2008 and began prototype production in 2011. The airliner had its maiden flight in 2017 and received its airworthiness certification from Chinese authorities in September 2022. A continued increase in orders and deliveries of the C919 airliner is likely to continue to boost demand for titanium mill products in the coming years. Comac has received over 1,400 orders for C919 from domestic and international airlines so far. China's 32 major manufacturers produced 159,000t of titanium mill products in 2023, up by 5.3pc from 151,000t in 2022, according to statistics from China nonferrous metals industry association titanium zirconium and hafnium branch (CNIA-TI). Aerospace, the second-largest consumption industry for titanium mill products, consumed 29,377t of titanium mill products in 2023, accounting for 19.8pc of China's total domestic production. "Demand from the aerospace industry has large potential in China," a source at a Baoji-based mill products manufacturer told Argus . "Only 20pc of titanium mill products is used in China's aerospace industry now, while the proportion is as high as 70-80pc in Europe and the US." A number of titanium mill products manufacturers in Baoji, which is known as China's "titanium valley", have begun to supply Comac as they have improved their product quality to meet Comac's criterion. Comac designated the country's largest producer Baoji Titanium (BaoTi) as the sole supplier of titanium mill products for the airliner just last year. Argus -assessed prices for titanium ingot, the main feedstock in the production of mill products, held stable from 23 April at 60,000-62,000 yuan/t ex-works for TA2 grade today, in response to firm titanium sponge feedstock costs and steady demand from mill products manufacturers. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Gas-fired units win Japan's clean power auction
Gas-fired units win Japan's clean power auction
Osaka, 30 April (Argus) — A planned 10 gas-fired generation units have won Japan's first long-term zero emissions power capacity auction, with the awarded capacity totalling nearly 6GW, or auction volumes sought for the first three years of the programme. Japan launched the clean power auction system from the April 2023-March 2024 fiscal year, aiming to spur investment in clean power sources by securing funding in advance to drive the country's decarbonisation towards 2050. The auction generally targets clean power sources — such as renewables, nuclear, storage battery, biomass, hydrogen and ammonia. But the scheme also applies to a new power plants burning regasified LNG as an immediate measure to ensure stable power supplies, subject to a gradual switch from gas to cleaner energy sources. The first auction held in January saw 10 new gas-fired units with a combined capacity of 5.76GW secure the funding of ¥176.6bn/yr ($1.12bn), the nationwide transmission system operator Organisation for Cross-regional Co-ordination of Transmission Operator (Occto), which manages the auction, said on 26 April. All winners can receive the money for 20 years through Occto, which collect money from the country's power retailers, although they need to refund 90pc of other revenue. Winners with a new gas-fired project should start commissioning their plants within six years and then begin refurbishment work to introduce clean fuels and technology within 10 years after commissioning. This means all the projects selected in the 2023-24 auction need to start operations by the end of 2030-31. Hokkaido Electric Power previously planned to begin operations of its Ishikariwan-Shinko No.2 gas-fired unit in December 2034 but it has advanced the start-up to 2030-31. Japan has secured a total of 9.77GW net zero capacity through the 2023-24 auction. Contract volumes include 1.3GW of nuclear, 1.1GW of storage batteries, 770MW for ammonia co-firing, 55.3MW hydrogen co-firing, 199MW biomass and 577MW of hydroelectric power projects, along with the 5.76GW of gas-fired projects. By Motoko Hasegawa Japan 2023-24 decarbonisation power capacity auction result Winner Power plant MW* Planned start-up Hokkaido Electric Power Ishikariwan-Shinko No.2 551 FY2030 Tohoku Electric Power Higashi Niigata No.6 616 FY2030 Kansai Electric Power Nanko No.1 592 FY2029 Kansai Electric Power Nanko No.2 592 FY2030 Kansai Electric Power Nanko No.3 592 FY2030 Chugoku Electric Power Yanai new No.2 464 Mar '2030 Tokyo Gas Chiba Sodegaura Power Station 605 FY2029 Osaka Gas Himeji No.3 566 FY2030 Jera Chita No.7 590 FY2029 Jera Chita No.8 590 FY2029 Total gas-fired capacity 5,756.3 Source: Occto, Argus * Sending end capacity Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
APLNG's Jan-Mar output higher: Origin
APLNG's Jan-Mar output higher: Origin
Sydney, 30 April (Argus) — The 9mn t/yr Australia Pacific LNG (APLNG) project in Queensland state produced and sold more LNG than the previous quarter and year earlier, Australian independent Origin Energy said in its January-March results. Output rose from the final quarter of 2023 because of the power failure of a vessel docked at APLNG's terminal in Gladstone harbour in late November , which prompted upstream operator Origin to cut flows to the liquefaction plant and APLNG to defer three cargoes to 2024. APLNG exported 134PJ (2.4mn t) of LNG through 34 cargoes for January-March, 8pc up from 124PJ and 32 cargoes the previous quarter and 4pc up on the 129PJ and 33 cargoes shipped in January-March 2023. Total APLNG production for July 2023-March 2024, the first three quarters of Origin's fiscal year to 30 June, was 519PJ, 4pc higher than 498PJ a year earlier, because of effective well and field optimisation activities, fewer maintenance disruptions and the continuing benefit of reducing workover backlog resulting in more wells being on line, Origin said. The terminal will take half a train of capacity off line for 12 days in June , following a two-day maintenance period in January. APLNG's domestic gas sales were 36PJ, steady on the previous quarter but higher by 24pc from the 29PJ sold a year earlier. Gas sales volumes for Origin's energy markets business fell by 5pc to 36PJ from 38PJ in January-March 2023. Origin said it continues to negotiate a deal with the government of New South Wales (NSW) regarding the 2,880MW Eraring coal-fired power station's future . The power plant had been due to close in 2025 but insufficient new generation capacity has been completed in NSW for this to occur. "We continue to progress large-scale batteries under development at Eraring and Mortlake power stations and recently announced our first storage offtake agreement from the Supernode battery in Queensland, taking Origin's storage portfolio to around 1GW of capacity once these batteries come on line," chief executive Frank Calabria said on 30 April. By Tom Major APLNG results Jan-Mar '24 Oct-Dec '23 Jan-Mar '23 y-o-y % ± q-o-q % ± Production (PJ) 176 167 165 7 5 Sales (PJ) 168 160 158 6 4 Commodity revenue (A$mn) 2,303 2,149 2,583 -11 7 Average realised LNG price ($/mn Btu) 12.17 11.88 14.50 -15 3 Average realised domestic gas price (A$/GJ) 6.90 6.39 6.17 12 8 Source: Origin Energy Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more