Hafnium prices surge as supply concerns build

  • Spanish Market: Metals
  • 14/11/22

Hafnium prices have surged since September as firm demand from the aerospace, industrial gas turbine (IGT) and semiconductor industries rapidly outpaces supply, and buyers attempt to navigate this notoriously illiquid and opaque market.

"We are seeing a ramp-up in aerospace with Boeing and Airbus accelerating deliveries, and niche materials such as hafnium continuing to gain traction," a trading firm said.

The aerospace industry — the main demand base for hafnium — requires the metal to be in its purest form for superalloys. But with global supply of pure hafnium metal only totalling around 70-75 t/yr according to industry estimates, and concentrated in just four producing countries — France, the US, China and Russia — consumers are finding it increasingly difficult to replace material.

"We recognise that there is an imbalance — the question is how much the supply gap is. It has been a slow burn… now it is not clear how far [the shortage] can go, it is uncharted territory," a supplier said.

"There is an acute tightness causing significant concerns in the industry about whether [consumers] will be able to keep enough material at the right time," the first trading firm said. "Everyone in the market is trying to assess what is promptly available in order to keep the needs of consumers… most of it goes into long-term contracts, it is not something you can easily find overnight in European warehouses".

Argus' assessment for 99pc grade hafnium with 1pc zirconium rose to $2,220-2,500/kg in warehouse Rotterdam on 8 November, up from $1,800-2,000/kg on 3 November and their highest level since Argus' assessment was launched in 2015. At the start of the current rally, in early September, the assessment stood at just over $1,500/kg in warehouse Rotterdam.

In the US — where imports from China are subject to a 25pc duty — prices have lately been pegged even higher as there are fewer options available and French suppliers are reportedly sold out until at least the end of the year.

But even in Europe, where there is no duty on Chinese material, market participants note reduced volumes coming from China in recent months. "Chinese producers are holding more hafnium as tetrachloride — for the electronics sector — instead of converting it to crystal bar, which is the form that aerospace uses," a second trading firm told Argus. "Semiconductor manufacturers in the US are also enquiring for more volumes for next year to enhance memory cards."

With such strong buy-side competition, differing levels of urgency between different types of consumer are causing a wide spread between offers. "It is entirely possible that on one day the spread between different buyers might be high, 20pc or even 30pc," a third trading firm said. "There are some end users who are not very price sensitive, they just need to get the material — usually spot and smaller quantities — and will have to pay premium prices. On the other hand, other end users will reject high prices, as they cannot make their product work at that price point".

Another trader said that "the market is very difficult to call right now and there is no transparency on Chinese supply, we are hoping that improves in the new year, and in the meantime there appears to be a bit of stalemate".

Exploring options

Some end users told Argus that they may look to reduce hafnium consumption where possible, if prices keep climbing, so as to protect margins and keep production costs under control, but substituting hafnium within such complex applications is no easy task.

"The preferred option is to see an expansion of [hafnium] capacity that will help balance out demand and supply… but if prices continue to climb, we will have a lower hafnium percentage," an original equipment manufacturer (OEM) said. "There are options available to us… [if prices increase much more] we will have to have a very serious conversation — everyone knows we have to look at alternatives."

Some market participants are looking to rhenium for reference — another speciality material used in superalloys for jet engines, which soared to a multi-year high in 2008. Back then, the aerospace industry made changes in alloy design to reduce the need for rhenium and pushed for greater recovery rates and recycling.

However, when it comes to hafnium, there is no clear set of options, Argus understands. The development of substitutes could be more plausible for industrial gas for turbines where the metal is used to use to boost the heat resistance of nickel-cobalt alloys, but is not that clear in jet engines or space rocket engines.

"In industrial gas turbines, [hafnium] is a less critical application, they can have the ability to replace it — it can be done in six months to a year," a supplier said, as in this segment, it is understood that rhenium could be used instead of hafnium. "When it comes to aerospace, that's going to take longer".

"There are other alloys (existing) that were used in the current generation of engines that contain rhenium instead of hafnium. Superalloy makers have already been looking at testing/retesting these rhenium alloys and low-hafnium variants of current hafnium — containing alloy products in these engines — so far, although this is just a consideration," a trader said.

The question of expanding global hafnium production is closely linked to the future of the nuclear industry and the output of pure zirconium, of which hafnium is a by-product. "The nuclear programme dictates the supply of hafnium," a market participant said. For every tonne of hafnium, 50t of zirconium is needed. Therefore it is not always profitable for zirconium producers to ramp up hafnium output even if there are more applications for hafnium. "You can stockpile zirconium, but that's not sustainable".

In the long-term, the hafnium supply shortage could also be eased by improvements in the recycling process and finding better methods to separate hafnium from zirconium — a difficult process because of the chemical similarities of both elements, sources said.

Hafnium was included in the EU Critical Raw Materials list in 2017. But it is still an overlooked metal, according to market participants. "Hafnium does not seem to have the attention of other metals and battery materials, mainly because it is a small market, but that does not mean is less strategic," the OEM said.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

FAA, EASA probe Boeing, Airbus Ti parts


14/06/24
14/06/24

FAA, EASA probe Boeing, Airbus Ti parts

Houston, 14 June (Argus) — The US Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA) are investigating whether falsified documents were used to verify the authenticity of titanium used in parts manufactured by Spirit Aerosystems and others for Boeing and Airbus jets. The US probe arose after Boeing alerted the federal regulator that material was procured through a distributor "who may have falsified or provided incorrect records," the FAA told Argus . The FAA is looking into the scope and impact of the issue. The EASA was notified by the Italian Civil Aviation Authority (Enac) of the issue and has subsequently started an investigation to determine if the traceability issue also has safety implications, an EASA spokesperson told Argus . There is currently no evidence of a safety issue in the fleet, it added, but it will investigate the root cause and monitor new developments. "This is about titanium that has entered the supply system via documents that have been counterfeited," a Spirit spokesperson told Argus . Boeing added that the issue affected some titanium shipments received by a "limited set of suppliers," including its fuselage maker Spirit, and relates to a "very small number of parts" on any of its aircraft. Boeing declined to specify on which programs and for what components the titanium in question was used, but it said the correct titanium alloy was used. Affected parts were produced from 2019-2023, Spirit said. Boeing is removing suspect parts on its planes before delivering them to customers for compliance purposes, but confirmed its in-service fleet is safe to operate based on an internal analysis, it said. Airbus confirmed the airworthiness of its A220 aircraft after conducting "numerous tests" on parts coming from the same source of supply, and said it is working in close collaboration with its supplier, an Airbus spokesperson told Argus . Spirit removed the units from production and performed over 1,000 tests to ensure the "mechanical and metallurgical properties" of the titanium continued to meet airworthiness standards. Spirit supplies an array of parts to Airbus and Boeing including fuselages, pylons, and wing structures. Titanium alloys are typically used in engine components such as turbines and compressor blades, landing gears and fasteners. Aerospace companies including Airbus and Boeing earlier this year formed a coalition to help prevent unauthorized parts from entering the supply chain. It followed actions taken by CFM International, and its parent companies GE Aerospace and Safran Aircraft Engines, last years in response to engine parts sold by British distributor AOG Technics with forged documents. By Alex Nicoll and Samuel Wood Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

S Africa's ANC, DA agree to form government


14/06/24
14/06/24

S Africa's ANC, DA agree to form government

Cape Town, 14 June (Argus) — South Africa's African National Congress (ANC) and Democratic Alliance (DA) political parties today agreed to form a government while the first sitting of the new parliament was underway. The agreement, which includes the Inkatha Freedom Party (IFP), paves the way for ANC leader Cyril Ramaphosa to be re-elected president. The parties will assume various positions in government broadly in proportion to their share of seats. The government of national unity (GNU) agreement is the result of two weeks of intense negotiations after the ANC lost its long-held majority in the national election on 29 May. It secured 40.2pc of the vote, and the centre-right, pro-market DA retained its position as the official opposition with 21.8pc. The deal scuppers the possibility of an alliance between the ANC and the two largest left-wing parties, MK (uMkhonto weSizwe) and the Economic Freedom Fighters (EFF), which credit ratings agency Fitch warned could pose risks to macroeconomic stability . MK party unseated the EFF in the election to come third, winning 14.6pc of the vote. The EFF secured 9.5pc, and the IFP came a distant fifth with 3.85pc. The MK and EFF are populist parties that campaigned on agendas including wide-scale land expropriation without compensation, nationalisation of economic assets — including mines, the central bank and large banks and insurers — halting fiscal consolidation and aggressively increasing social grants. The GNU parties agreed the new administration should focus on rapid economic growth, job creation, infrastructure development and fiscal sustainability. Other priorities include building a professional, merit-based and non-partisan public service, as well as strengthening law enforcement agencies to address crime and corruption. Through a national dialogue that will include civil society, labour and business, parties will seek to develop a national social compact to enable South Africa to meet its developmental goals, they said. The GNU will take decisions in accordance with the established practice of consensus, but where no consensus is possible a principle of sufficient consensus will apply. By Elaine Mills Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Inpex invests in Australian solar, battery project


14/06/24
14/06/24

Inpex invests in Australian solar, battery project

Tokyo, 14 June (Argus) — Japanese upstream firm Inpex has decided to invest in a hybrid solar and battery project in the Australian state of New South Wales, aiming to boost its renewable energy business abroad. Inpex reached a final investment decision on the Quorn Park Hybrid project in Australia, a joint venture project with Italian utility Enel's wholly-owned Australian renewable energy firm Enel Green Power Australia (EGPA), the Japanese firm announced on 14 June. The project consists of solar farm construction and power generation with a photovoltaic and battery system. Batteries are usually a necessary back-up power source to stabilise power grids that utilise renewable energy. The project aims to produce around 210GWh/yr from solar power with around 40MWh/yr from battery storage, according to EGPA, with an operational capacity of around 98MW for solar and 20MW for battery. The firms plan to start construction during the second half of 2024, before it starts commercial operations during the first half of 2026, according to an Inpex representative that spoke to Argus . The Japanese firm did not disclose the investment amount but the investment value for construction of the project is estimated at "over $190mn", according to EGPA's website. Inpex bought a 50pc stake in EGPA in July 2023, with an aim of expanding its renewable generation portfolio. The firm regards Australia as a "core area" for boosting its renewable energy business, according to Inpex. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s scrap export tender slips in June


13/06/24
13/06/24

Japan’s scrap export tender slips in June

Singapore, 13 June (Argus) — The monthly export tender of Japanese scrap dealer co-operative Kanto Tetsugen for June settled lower compared with May but remained above recent market levels, providing support to the export market and prices. The June tender concluded at an average of ¥51,364/t ($327.20/t) fas for 25,000t of H2 scrap, a fall of ¥1,226/t from May. This brought the fob price to an equivalent of ¥52,364/t or $333.60/t. The first 10,000t settled at ¥51,510/t with the second 15,000t at ¥51,267/t. The two shipments are expected to head for Vietnam and Bangladesh. Several market participants expect the export market to be supported, despite the tender result concluding lower against May, as it was above recently traded levels. The export market has faced significant downwards pressure over the past month, with the H2 fob price falling by ¥2,400/t because of sluggish demand and low price expectations from Taiwanese and Vietnamese buyers. The Argus H2 fob Japan assessment was ¥50,200/t on 12 June, while the May monthly average was ¥51,381/t fob Japan. The latest tender price aligns with the domestic price in the Kanto region, which may become the new target price for exporters. The H2 collection price at Tokyo Steel's Utsunomiya plant was ¥51,500/t delivered to the steel mill. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more