US HRC: Prices jump as mills hold the line

Spanish Market: Metals
28/02/23

US domestic hot rolled coil (HRC) spot prices jumped this week as mills continued to receive higher prices on the spot market, while a price increase yesterday by integrated steelmaker Cleveland-Cliffs has yet to be followed by any of its competitors.

The Argus weekly domestic US HRC Midwest and southern assessments both jumped by $100/st to $1,000/st, the first time they've risen to such levels since June 2022. At that time steel prices were collapsing after being driven up by the conflict in Europe.

Steel mills have continued to be successful in receiving higher flat steel spot offers after formally raising prices by $360/st through a series of increases since the end of November through 21 February. The Argus US Midwest and south spot assessments have increased by more than $370/st since then.

Multiple steel mills reported selling HRC at $1,000/st, and service centers reported paying those prices for HRC.

The higher prices come after Nucor led a round of price increases last week that was joined by Cliffs and integrated competitor US Steel, along with electric arc furnace (EAF) steelmaker and reroller NLMK USA, among others. Minimum HRC prices were set at $1,000/st by Nucor, Cliffs and NLMK USA, with the latter pushing the price of cold rolled coil (CRC) and hot dipped galvanized (HDG) coil products to $1,200/st minimums.

Yesterday Cliffs announced another $100/st price increase, setting its minimum HRC pricing at $1,100/st, a move that no other steelmaker has yet to follow.

Multiple rumors have spread throughout the market about why prices have increased so rapidly, with few holding water.

The combination of steel mill utilization rates that have been below 75pc since mid-October, tight service center inventories and elevated raw material prices have added to continued high steel and raw material prices globally to push finished steel prices higher.

Multiple service centers have said mills are now unwilling to allow bookings on contracts above the maximum volumes, after being more lenient in January and February.

Mills also seem unwilling to sell light gauge HRC, with one service center saying they've been seeking 5,000-10,000st of such material and are being no quoted.

Offers were reported in a wide range between $900-1,100/st, with most in the $1,000/st range.

HRC lead times in the Midwest rose to 6-8 weeks from 6-7 weeks, with most mills said to be looking at the second week of April. Some mills have booked into May and one reported it is booked through to June on HRC.

Contract discounts of 5-9pc to the current HRC assessment would be the equivalent of $50-90/st.

The spread between #1 busheling scrap delivered US Midwest mills and HRC jumped by 20pc from the prior week to $600/st and is at the highest level since late-May 2022, when HRC prices were plunging from a conflict-influenced price spike.

A year ago the spread was $583/st and was bottoming out prior to the European conflict.

The Argus HRC import assessment into Houston rose by $45/st to $885/st. Long lead times from non-North American countries and elevated prices continue to keep imports at bay for now, with some offers being made for July delivery.

The Argus weekly domestic US CRC assessment jumped by $140/st to $1,200/st as it remains the tightest market and commands the highest premium, while HDG assessments rose by $80/st to $1,100/st.

An HDG buyer noted that they turned to Brazil to fill some of their material requirements, pushing out their on order tons in the US through August and avoiding the US spot market.

Lead times for CRC moved to 10 weeks from 8-9 weeks while HDG lead times rose to 8-9 weeks from 7-8 weeks.

The CME HRC Midwest futures market jumped sharply in the last week, pushing up by triple digits across the board and pushing out contango through August, two months longer than last week and indicating that sentiment has shifted that this current run could last well into the second half of the year. April prices skyrocketed by $230/st to $1,135/st, while May prices also rose sharply by $206/st to $1,112/st. June jumped by $202/st to $1,088/st, while July prices rose by $158/st to $1,018/st. August futures increased by $166/st to $1,010/st, while September prices rose by $155/st to $994/st.

Plate

The Argus weekly domestic US ex-works plate assessment was flat at $1,480/st, the current target price for Nucor. Some possible offers as low as $1,420/st were reported.

Lead times were up to 6-7 weeks from six weeks.

The plate delivered assessment jumped by $80/st to $1,590/st.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

17/12/25

Viewpoint: Copper supply tightness beckons in Europe

London, 17 December (Argus) — Europe's copper market heads into 2026 carrying the imprint of an extraordinary 2025, a year in which price signals, physical flows and geopolitics diverged sharply. What emerged was not a simple story of shortage or surplus, but a fractured global market in which Europe briefly found itself competing for metal with the US, while China's smelting overcapacity distorted upstream fundamentals. While European supply has stabilised, a projected tightness in 2026 promises higher premiums, particularly if underlying metal prices remain at record highs. Fractured fundamentals in 2025 Copper prices surged through 2025, with London Metal Exchange (LME) three-month values repeatedly achieving record territory above $11,000/t and briefly approaching $12,000/t in December. On the surface, the rally appeared to signal a classic supply crunch, driven by mine disruptions at assets such as Grasberg, in Indonesia, and Kamoa-Kakula, in the Democratic Republic of Congo, and structurally strong demand from grids, electrification and data centres. But the deeper story was more complex. Demand growth was uneven. China's apparent consumption slowed sharply in the second half of the year as stimulus effects faded, while manufacturing activity in Europe remained weak. Yet prices continued to rise, reflecting not so much booming end-use demand as a geopolitical and logistical reshaping of supply. The decisive factor was the growing pull of copper into the US market on the threat of import tariffs on refined copper. The widening price premium on the Chicago Mercantile Exchange (CME) contract relative to the LME opened a powerful arbitrage that drew metal out of LME warehouses and, by extension, away from Europe. By late 2025, CME stocks accounted for more than half of global exchange inventories, while LME registered stocks fell below 100,000t at points — levels historically associated with acute tightness in deliverable supply. For Europe, this mattered more than headline global balances. Even as total exchange inventories rose above 700,000t worldwide, availability became tighter in non-US regions, pushing spot and term premiums sharply higher. LME-CME arbitrage: the key swing factor The LME-CME arbitrage, which is governed by several interlinked factors — relative interest rates, currency moves, logistics costs, warehouse accessibility and above all, US trade policy — is expected to remain in 2026. As long as the CME price commands a premium of several hundred dollars per tonne over the LME, the incentive to ship metal into the US persists. In 2025, that premium regularly exceeded estimated freight and financing costs, keeping the arbitrage wide open. In 2026, tariff-driven uncertainty could trigger further pre-emptive inflows into the US early in the year, sustaining tightness elsewhere — including Europe — before potentially easing later once inventories are built and global supply recovers from 2025 shocks. Conversely, a delay or dilution of tariffs could narrow the spread, allowing some metal to remain or return to LME locations. European supply and premiums: a new baseline? European spot premiums eased in September-November as the scramble for cathode outside the US eased, but as major producers have responded to 2025 events by lifting 2026 term premiums aggressively, European spot premiums also surged as sellers look to mirror the new market baseline in the spot market. Chilean supplier Codelco announced a near 40pc increase in its European premium for 2026 deliveries, taking it to the mid-$300s/t over LME, with Aurubis following with similarly high offers. The Argus assessment for copper cathode grade A cif Rotterdam rose to $210-220/t on 2 December, increasing by more than a third relative to September-November levels. Trading groups and producers surveyed by Argus indicate a reassessment of risk — producers are pricing in the possibility that Europe becomes structurally "second in line" behind the US for deliverable cathode. Whether these elevated premiums are sustainable through the whole of 2026 depends on how quickly arbitrage-driven stock movements stabilise. But even if LME stocks rebuild later in the year, the premium reset of 2025 may have established a higher floor for Europe. Bank forecasts: surplus, but not comfort Major banks mostly agree that the global copper market remains in surplus in 2026, although the size of that surplus is shrinking. Goldman Sachs projects a surplus of about 160,000t in 2026, down from roughly 500,000t in 2025, and expects prices to average $10,000-11,000/t. But the International Copper Study Group points to a possible deficit of 150,000t in 2026, keeping the market on watch. Chinese market participants are expecting non-US supply to tighten significantly as material flows in the US, but some US market participants point to an easing trend. On paper, these numbers argue against a classic shortage. But the experience of 2025 shows that regional tightness can coexist with a global surplus. For Europe, the key takeaway is that surplus metal may not be available where it is needed, when it is needed, if arbitrage and policy continue to redirect flows. In that sense, 2026 could resemble 2025 — balanced or a surplus globally, but intermittently tight in Europe. By Raghav Jain Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

CBAM verification to redefine Italian HRC pricing

17/12/25

CBAM verification to redefine Italian HRC pricing

London, 17 December (Argus) — Italian hot-rolled coil (HRC) prices could find stronger support in 2026 as the EU's carbon border adjustment mechanism (CBAM) moves into its financial phase and safeguard quotas tighten, raising the cost and complexity of third-country supply. Default values under CBAM underscore the need for suppliers to have their emissions data verified, and perceptions of compliance and trustworthiness could reshape import flows in the year ahead. A modest recovery in real steel consumption could add to the upward pressure, even as buyers remain cautious after four years of contraction. European steel association Eurofer forecasts EU real steel consumption will rise by 1.1pc in 2026, following declines of 4.2pc in 2024 and an expected 2.1pc this year, weighed down by weak automotive demand. The improvement coincides with stricter import regulation: CBAM charges will vary by origin, and quota management will become critical, as volumes drop. The origin of import material is likely to only grow in importance for purchasing decision-making. Argus currently publishes seven HRC origin differentials to its cif Italy HRC assessment. Low-CBAM, short-haul origins could tighten spreads to domestic offers, while higher-CBAM volumes will need deeper discounts to remain competitive, which would be exacerbated by expectations of pro-rated safeguard duties once the post-safeguard mechanism enters into effect. Beyond carbon intensity and quota considerations, the ability of suppliers to demonstrate verified CBAM compliance could become a decisive factor in purchasing decisions. Mills perceived as lacking robust internal processes for emissions reporting may face reduced buyer confidence, while those with transparent systems could command a premium. In a market where regulatory risk is rising, trustworthiness and preparedness are emerging as value drivers, influencing origin differentials and potentially narrowing the gap between suppliers perceived as compliant and domestic offers. Domestic Italian mills, by contrast, are positioned to hold premiums over 2025 average prices as imports lose some of their cost advantage, and as volumes are likely to be cut. The Argus Italian HRC ex-works assessment has averaged €583.71/t so far in 2025, down from €620.13/t in 2024, while cif Italy has averaged €530.39/t against €578.47/t a year earlier. Lower averages reflected subdued demand and steady import arrivals through to mid-year, when ample offers from Indonesia, India and Turkey, combined with a firm US dollar, pulled cif Italy lower and forced mills to discount. Domestic HRC values slid into the summer on thin buying and cheaper imports, hitting a low monthly average of €535.75/t in July. Prices rebounded sharply in October to average €608.75/t ex-works as expectations of tighter import rules and CBAM-linked costs lifted sentiment, even as downstream demand stayed muted. With carbon intensity and quotas shaping trade flows, Italian HRC in 2026 could trade higher than in 2025: not on demand strength alone, but on the rising premium for certainty in a more regulated import landscape. By Lora Stoyanova Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Australia coal, Fe prices to fall; LNG up: Treasury

17/12/25

Australia coal, Fe prices to fall; LNG up: Treasury

Sydney, 17 December (Argus) — Australian iron ore, coking coal, and thermal coal prices are expected to decline by the end of December 2026, while LNG prices may rise from current levels, according to Treasury forecasts released on 17 December. Australian commodity prices are expected to return to long-run fundamental levels, Treasury said in its Mid-Year Fiscal and Economic Outlook for the 2025-26 financial year ending 30 June. Thermal Coal Australia's thermal coal prices have been supported by ex-China demand since Treasury released its July 2025-June 2026 budget on 25 March, Treasury said. But it does not expect this trend to continue. Treasury forecasts Australian thermal coal spot prices will fall to $70/t on a fob basis by the end of December 2026, down from current levels. Argus ' Australian NAR 6,000 kcal/kg fob Newcastle price was last assessed at $108.46/t on 16 December, up from $95.62/t on 25 March. Australian thermal coal exports to China fell 11pc on the year in January-October ( see table ), while shipments to Japan, South Korea, Vietnam, and Malaysia rose, data from the Australian Bureau of Statistics show. Steelmaking Inputs Chinese economic policy support has lifted iron ore and metallurgical coal prices since March, Treasury said. But it expects Australian iron ore and coking coal spot prices to fall to $60/t and $140/t fob, respectively, by the end of 2026. Argus ' metallurgical coal premium hard low-volatile fob Australia price was last assessed at $215.10/t on 16 December, while its iron ore fines 61pc Fe (ICX) fob Australia netback price was last assessed at $90.55/t. Treasury also expects mining investment to remain unchanged over the next two years, largely because of the iron ore and coking coal sectors. Iron ore producers may invest in projects to maintain production, but coking coal producers are expected to run down their capital stock, Treasury said. Producers are looking to sell or finance around six Queensland coking coal mines, a market participant told Argus on 2 December. Petroleum LNG prices have declined since March because of China's shift toward non-Australian gas, Treasury said. Australian LNG spot prices are expected to reach $10/mm Btu by the end of December 2026, according to Treasury forecasts. Argus ' Gladstone fob price — an LNG netback indicator — was last assessed at $9.01/mm Btu on 16 December, down from $12.90/mm Btu on 25 March. China plans to prioritise pipeline and domestic gas over LNG imports in the coming years, PetroChina International's global head of LNG Yaoyu Zhang said on 4 December. Treasury also expects global oil prices to hover around $66/bl over the next four years, down from its March estimate of $81/bl. Australia's government will raise less revenue from its petroleum resource rent tax than previously expected because of the downgrade, the agency added. The tax is forecast to generate A$1.5bn in 2025-26, down from the earlier estimate of A$1.95bn. By Avinash Govind Treasury Commodity Forecasts (Mid-Year Economic and Fiscal Outlook) $ Commodity Argus Price (most recent)* Forecasted Price* Change (%) Coking Coal 215.1/t 140/t -35.0 Thermal Coal 95.62/t 70/t -26.8 Iron Ore 90.55/t 60/t -33.7 LNG 9.01/mm Btu 10/mm Btu 11.0 * Argus' Australian NAR 6,000 kcal/kg fob Newcastle; metallurgical coal premium hard low-volatile fob Australia; Argus' Gladstone fob; Iron ore fines 61pc Fe (ICX) fob Australia netback * fob Australia basis, at end of December 2026 Argus, Commonwealth of Australia Australian thermal coal exports mn t Market Jan - Oct '25 Jan - Oct '24 YTD Change (%) China 53 60 -11 India 2.9 3.4 -16 Japan 59 59 0.5 South Korea 11 9.7 12 Vietnam 13 9.6 37 Malaysia 5.9 5.4 11 Australian Bureau of Statistics Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Brazil steel output may fall in 2026: Aco Brasil

16/12/25

Brazil steel output may fall in 2026: Aco Brasil

Sao Paulo, 16 December (Argus) — Brazilian steel output may drop in 2026 as lower-priced imports keep pressure on the domestic market, industry chamber Aco Brasil said. The country's steel output will fall to 32.4mn metric tonnes(t) in 2026, down by 2.2pc from a year earlier, driven by a 10pc climb in imports to 6.6mn t in the period. These figures exclude the effects of anti-dumping duties expected to take effect in the first half of the year, Aco Brasil said. "Our mills are operating at a 66pc capacity rate because of predatory imports, but we should be at around 80–85pc output capacity", Aco's executive president Marco Polo de Mello Lopes said in a press conference on 16 December. Imports will also weigh on domestic sales, with shipments expected to decline to 20.8mn t next year, down by 1.7pc from 2025, the association said. Imports are expected to reach a record 6.6mn t, up by 3.9pc from the previous all-time high of 6.4mn t projected for 2025, Aco Brasil said. Apparent consumption, the sum of production and imports minus exports, will increase by 1pc on the year to 27mn t in 2026, mainly driven by rising import levels. Revised 2025 projections The chamber has cut its 2025 projection for import growth from 19pc to 7.5pc because domestic price declines are curbing a sharper rise in foreign metal. The revised outlook now sees rolled steel imports at 5.7mn t, up by 20pc instead of the previously estimated 32pc. Imports have already hit an all-time high of 6mn year-to-date November 2025, up by 7pc year on year. Total import volumes may increase to 6.4mn t by year-end, according to Aco Brasil. Despite reaching record levels, import inflows lost traction in the second half of the year. As a result, Aco Brasil's initial projection of 7mn t in imports for the year will likely fail to materialize. In addition to price declines, Brazil's quota policy helped reduce import volumes, sources told Argus . The regime imposes a 25pc tariff on volumes that exceed the quota threshold for 19 rolled steel products. Importers also became wary of anti-dumping duties set to take effect in a couple of months. Seaborne trade has become riskier, as duties of up to $600/t could apply upon discharge at Brazilian ports, market participants said. New anti-dumping duties could reverse import growth, with volumes likely to fall instead of rise if the measures take effect. Whether this will be enough to lift production levels remains uncertain. Aco Brasil has also revised its 2025 output outlook, now projecting a 2.2pc drop to 33.1mn t, compared with a previous estimate of a 0.8pc decline to 33.6mn t. Production cuts deepened despite imports falling short of expectations throughout the year, suggesting that factors beyond imports may be driving the reduction. By Isabel Filgueiras Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US House clears hurdle to pass permitting bill

16/12/25

US House clears hurdle to pass permitting bill

Washington, 16 December (Argus) — Republicans in the US House of Representatives have overcome an initial obstacle to passing a marquee permitting overhaul bill after committing to vote on key amendments that would strip out potential benefits for offshore wind. Republicans in the House voted 215-209 in a vote on Tuesday to approve a rule that will dictate the terms of debate for votes later this week on the SPEED Act, which has become the focus of bipartisan efforts to fast-track the permitting process for pipelines, electric transmission lines, railroads and other infrastructure. A group of far-right conservatives initially voted against the rule, but most reversed course during the vote in exchange for revisions that have yet to be made public. The Tuesday vote was one of the last remaining hurdles to House passage of the SPEED Act, which is expected to pick up some Democratic votes when it comes up for a final vote later this week. The House majority typically is responsible for putting up all the votes for a rule, meaning it would only take a few Republicans to block bill debate. Republicans were uncertain they would have enough votes for the rule, as far-right conservatives such as US representative Andy Harris (R-Maryland) and others were lobbying for changes. On Monday, US representative August Pfluger (R-Texas) urged attendees of a conference to put as "much effort as you possibly can" into persuading wavering Republicans to support the permitting bill. Pfluger is the chair of the Republican Study Commission, a caucus that represents a majority of House Republicans. "Go talk to them and let them know how important this is," Pfluger said during an event organized by the think tank the Conservative Coalition for Climate Solutions. Ahead of the vote, an industry coalition on Tuesday released a joint letter offering "strong support" for the bill. Among the signatories were the American Petroleum Institute, the US Chamber of Commerce, the Association of American Railroads and the US LNG Association. President Donald Trump has yet to take an explicit position on the SPEED Act, but administration officials are optimistic permitting legislation could be enacted. "I think we are at a time where the chance of a real permitting reform bill is higher maybe than it's ever been," US energy secretary Chris Wright said at the event on Monday. The SPEED Act would focus on the implementation of the National Environmental Policy Act (NEPA), a decades-old law that requires federal agencies to prepare environmental reviews of infrastructure projects. Pipeline companies and renewable energy developers alike blame the law for costly delays, both because of the time it takes for agencies to issue reviews and then the risks that permits will be thrown out because of lawsuits. The bill would narrow the scope of environmental reviews, aligning with a unanimous US Supreme Court ruling this summer. But the bill's most significant changes would make permits more durable. Even if a court found a NEPA review was flawed, the bill would keep permits intact during further analysis. And in a last-minute change, the bill would offer more permit "certainty" by limiting the government's ability to rescind prior approvals. That could protect pipeline permits such as the now-canceled Keystone XL pipeline, while also stopping Trump from halting more offshore wind projects. But the permit certainty language drew concern from far-right conservatives who oppose offshore wind. House Republicans in response agreed to vote on an amendment sponsored by Harris and others that would remove the "permit certainty" changes. Two other amendment votes also backed by Harris would stop expedited permitting treatment in the SPEED Act for offshore wind or any project that Trump has sought to block. Passage of those amendments could cost some Democratic support for the bill. Even if the bill passes, it is expected to be subject to major changes in the US Senate to attract enough support from Democrats to prevent a filibuster. Senate Democrats are hoping to insert language that would prevent what they describe as a "solar ban" being enforced by the Trump administration. By Chris Knight Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more