Cliffs to buy Canadian steelmaker Stelco

Spanish Market: Coking coal, Metals
15/07/24

US integrated steelmaker Cleveland-Cliffs will acquire Canadian integrated steelmaker Stelco in a cash and stock deal.

The acquisition of Stelco, an independent steelmaker in Hamilton, Ontario, was announced by both companies this morning. Stelco shareholders will receive C$60/share ($44/share) of Stelco common stock and 0.454 shares of Cliffs common stock, or $C10/share of Stelco common stock. The transaction is valued at C$3.4bn ($2.5bn) and the deal is expected to close in the fourth quarter of 2024, according to a news release.

Stelco will maintain its headquarters in Hamilton, and capital investments of at least C$60mn will be made over the next three years. Stelco will aim to increase production from current levels and will operate as a wholly-owned subsidiary.

In its news release, Cliffs said the purchase of Stelco will double Cliffs' exposure to the flat-rolled spot market, adding that Stelco's primary customer base is service centers buying hot-rolled coil (HRC) products.

Stelco shipped 636,000 short tons (st) of steel products in the first quarter, of which 74pc was HRC, according to a quarterly report.

Cliffs already operates seven tooling and stamping plants in Canada and a scrap yard run by its Ferrous Processing and Trading Company (FPT), all located in Ontario, according to the company.

The head of the United Steelworkers (USW) union, David McCall, is said to support the transaction.

Cliffs' move to buy Stelco comes nearly a year after Cliffs began its failed bid to purchase steelmaking competitor US Steel.

Japanese steelmaker Nippon Steel is now in the midst of negotiating the $15bn purchase of US Steel, a deal that has been the subject of public political hand wringing and open dispute among the executives of Cleveland-Cliffs, US Steel, Nippon Steel and the USW.

By Rye Druzin

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

20/05/25

Community Union lambasts Liberty Steel ownership

London, 20 May (Argus) — Trade union Community and UK politicians have lambasted the "irresponsible" ownership of UK firm Liberty Steel, with the company's Speciality Steels unit facing a winding up petition tomorrow. "New, responsible ownership is needed to give the business the brighter future it needs and deserves, and that can only be achieved with a decisive change at the top. Enough is enough — Sanjeev Gupta must invest in the business or step aside," Community Union general secretary Roy Rickhuss said. "Our Stocksbridge Speciality Steels site needs new, competent ownership to maximise its potential, so that the business has a real chance for success," Labour Member of Parliament for Penistone and Stocksbridge Marie Tidball said. The business, which has operated at a fraction of its nameplate capacity in recent years, is subject to a winding up petition submitted by major creditor Harsco and supported by a number of other creditors. The petition hearing had been delayed, but the company recently withdrew its own restructuring plan as it was clear it had insufficient creditor support to be approved . Liberty had been in talks with the government, with some suggesting it was seeking investment to keep the business afloat, or a sale. "We continue to closely monitor developments around Liberty Steel, including any public hearings, which are of course a matter for the company", a spokesperson for the Department for Business and Trade said. "It is ultimately for Liberty to manage commercial decisions on the future of its companies, and we hope it succeeds with its plans to continue on a sustainable basis." Company sources suggested the winding up petition will go ahead tomorrow, with the official receiver likely to be appointed shortly after. But Liberty is seeking an adjournment to buy time, the sources said. The government's intervention in British Steel, whereby it passed a law enabling it to direct the company, has prompted some talk that it could do the same with Liberty's Speciality business. Speciality produces high-grades supplied into strategic sectors, such as aerospace, and has the benefit of already being electric arc furnace-based. Its problems in recent years have been driven more by cash constraints rather than market conditions, given the higher-value of some of its product lines. But rising costs and tough trading conditions have clearly been a factor as well. Some market participants said the government could look to connect some of the Speciality plants and British Steel to attract private investment. But others suggested the Speciality business may be more attractive to private investors as a stand-alone unit, and that there will be interest should it fall into administration. Liberty said the UK sector has "for many years faced major challenges due to high energy costs and an over reliance on cheap imports". It also said it continues to hold discussions with creditors on restructuring the unit's debt, and is "grateful for the patience and fortitude" of colleagues and stakeholders. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

India's Shyam Metalics to build West Bengal wagon plant

20/05/25

India's Shyam Metalics to build West Bengal wagon plant

Mumbai, 20 May (Argus) — Indian metals producer Shyam Metalics will build a state-of-the-art wagon manufacturing facility in Kharagpur, West Bengal, with an annual production capacity of 4,800 wagons, the firm announced on 19 May. The company plans to build the facility under its step-down subsidiary, Ramsarup Industries, and expects to begin operations by March 2026. The plant will be developed in two phases. The first phase will have a production capacity of 2,400 wagons/yr, or approximately 8 wagons/d, while the second phase will double output to 4,800 wagons/yr. The firm aims to produce a variety of wagons at the plant, including flat, open, box, covered, tank and specialised wagons. The plant will adopt the "Uni-Flow" manufacturing layout according to international standards to ensure efficient production, said company director Sheetij Agarwal. The move is a key part of Shyam Metalics' defined five-year capital expenditure plan and aligns closely with the government's "Make in India" and "Atmanirbhar Bharat" initiatives, highlighting Shyam Metalics' dedication to fostering self-reliance in critical infrastructure, the firm said. The facility reflects the company's commitment to innovation, sustainability, and nation-building, it added. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

GFG puts Australian Mn plant on care and maintenance

20/05/25

GFG puts Australian Mn plant on care and maintenance

Sydney, 20 May (Argus) — UK-owned steelmaker GFG Alliances has placed its Liberty Bell Bay manganese alloy smelter in Tasmania into care and maintenance over manganese ore supply issues, Tasmanian minister for business, industry and resources Eric Abetz said on 19 May. GFG is committed to the long term success of the Liberty Bell smelter and expects the pause to be temporary, a company spokesperson told Argus on 20 May. The Tasmanian state government is working with GFG and the Australian federal government to address challenges at the plant. It has also asked prime minister Anthony Albanese to support Liberty Bell, state premier Jeremy Rockcliff said on 20 May. Liberty Bell Bay is Australia's only ferroalloy plant and is permitted to produce a combined total of 290,000 t/yr of ferromanganese and silicomanganese. GFG sources Liberty Bell Bay's manganese ore from Australian metal producer South32's Australian Gemco mine and South African sites, which have faced recent production disruptions because of bad weather and maintenance shutdowns. Cyclone Megan flooded and damaged parts of Gemco in March 2024, taking it off line for four months. South32 closed the mine again in January-March 2025 to complete mine dewatering work. South32 also cut manganese production at its South African operations by 10pc on the year in January-March because of scheduled maintenance work and an unplanned shutdown at its Wessels mine. Gemco's manganese production is forecast to reach approximately 5mn t in the 2025-26 financial year ending 30 June, the Northern Territory state government said in a budget announcement. South32 has not released its Gemco production guidance for 2025-26. Liberty Bell Bay's production pause comes after the South Australian state government placed GFG's 1.2mn t/yr Whyalla steelworks into administration in February. The state government later announced plans to transfer control of the Whyalla port from GFG to the steelwork's administrators. Liberty Bell Bay is one of only six facilities in Tasmania covered under Australia's federal safeguard mechanism. It received 8,762 safeguard mechanism credits (SMCs) for the July 2023-June 2024 compliance year as its covered scope 1 emissions of 196,125t of CO2 equivalent (CO2e) were below its baseline of 204,887t of CO2e. Two facilities operated by GFG — the Whyalla steelworks and the Middleback Range iron ore mine — ended the compliance year in an excess emissions situation because they were in administration, according to the Clean Energy Regulator (CER). By Avinash Govind and Juan Weik Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

China's CATL raises $4.6bn from Hong Kong IPO

20/05/25

China's CATL raises $4.6bn from Hong Kong IPO

Beijing, 20 May (Argus) — China's largest battery producer CATL has raised $4.6bn from the sale of 135.6mn of its shares on the main board of the Hong Kong Stock Exchange today. This is likely to be the world's largest initial public offering (IPO) in 2025. CATL's shares hit a high of HK$299.80 ($38.40) in the morning trading session, up by 14pc from its listing price of HK$263. CATL's Hong Kong IPO is expected to enhance its international brand influence and finance its expansions in the global battery market, according to industry participants. CATL is not only a battery component manufacturer and system solution provider, but also aims to be a pioneer of the global zero-carbon economy, said company chairman Zeng Yuqun at the listing ceremony. The world's total investments in vehicle electrification will hit $3 trillion by 2030, and more than $10 trillion will be invested in renewable energy by 2050, according to CATL. CATL's electric vehicle battery installations rose by 40pc on the year to 84.9 GWh in January-March, accounting for 38pc of the world's total installations, data from South Korean market intelligence firm SNE Research show. Its total battery capacity is projected to reach 700-1,000 GWh/yr in 2025, making it the world's first TWh-level battery manufacturer, according to market participants. The firm has been accelerating expansions outside China in recent years, with projects in Germany, Hungary, Spain, and Indonesia. The company is also facing geopolitical pressure because of the US' higher tariffs on Chinese battery imports and accusations by some US politicians of having supply chain connections to forced labour. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Deere sees paying $500mn in US tariffs through Oct

16/05/25

Deere sees paying $500mn in US tariffs through Oct

Houston, 16 May (Argus) — Heavy equipment manufacturer John Deere expects US import tariffs to cost the company $500mn in the fiscal year that ends in October. The Illinois-based company paid roughly $100mn in tariffs in its fiscal second quarter, which ended 27 April. It expects to pay the US government another $400mn in tariffs during the second half of its fiscal year, executives said Thursday on an earnings call. Deere plans to recoup its tariff costs through a combination of charging higher prices and reducing its costs, chief financial officer Joshua Jepsen said. Tariffs also are expected to contribute to lower demand for tractors and other farm equipment produced by Deere. Large agricultural equipment sales across the industry are projected to fall by 30pc in the US and Canada in 2025 due to trade uncertainty and high interest rates, Deere said. Deere domestically produces 79pc of the completed goods it sells in the US, and 76pc of the components used at its domestic facilities are sourced from US-based suppliers. The company is prepared to invest $20bn to expand its domestic manufacturing over the next decade, chief executive John May said. The company imports 10pc of the components used in its US plants from Mexico and has begun qualifying its products for exemptions under the US-Mexico-Canada free trade agreement (USMCA) to mitigate the impact of tariffs. US sales of the company's roadbuilding machinery are subject to the US' 10pc global import tariff rate, as the equipment is predominantly made in Germany. The company reduced the low end of its profit forecast for the fiscal year to $4.75bn-$5.5bn, down from $5bn-$5.5bn. John Deere's second-quarter profit fell to $1.8bn, down by 24pc compared with the year-prior period. By Jenna Baer Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more