High sulphur prices pressure Indonesian buyers

Spanish Market: Fertilizers, Metals
07/05/25

Steep increases in sulphur prices, against expectations of lower future nickel demand, and falling nickel prices since last year are pressuring metals producers in Indonesia, and some are considering postponing new projects.

Sulphur is used as a raw material in the production of nickel intermediates such as nickel matte and mixed hydroxide precipitate (MHP), through the rotary kiln-electric furnace (RKEF) and high-pressure acid leaching (HPAL) processes, respectively. Producing 1t of MHP or nickel matte requires an estimated 10t and 15t of sulphur, respectively.

Global sulphur prices began to rise in mid-2024 on firmer demand from Morocco and Indonesia. Morocco's OCP started up two sulphur burners last year that will consume 967,000 t/yr of sulphur at capacity. In Indonesia, newly commissioned HPAL production lines at QMB New Energy Materials and Halmahera Persada Lygend also added an estimated 830,000 t/yr of sulphur demand.

Uncertainty over Kazakh and Russian sulphur export availability because of EU sanctions also created uncertainty over available supply in the region. Tighter supply, compounded by competing Chinese and Indonesian demand after the Lunar New Year holidays, spurred a rally in sulphur prices in the first quarter of the year.

Fob Middle East sulphur prices more than tripled to $285.5/t fob as of 1 May from $86/t a year earlier, Argus assessments show. Cfr Indonesia granular sulphur prices rose by $185/t to $297/t cfr over the same period.

While sulphur prices have risen significantly over the past year, prices for Indonesian-origin nickel intermediates have been largely rangebound at $12,000-14,000/t of nickel contained since January 2024. The comparatively flat nickel prices and the rising raw material prices mean that producers' margins are narrowing further. Gross profit margins for MHP products were close to $10,000/t in 2023 before falling to around $7,000/t in 2024, according to Argus estimates.

Current sulphur prices take up around 40pc of the total production cost of nickel matte, the largest portion out of other raw materials such as caustic soda, according to one metals producer.

And the increased adoption of non-nickel containing battery chemistries such as lithium-iron-phosphate and higher demand for plug-in hybrid electric vehicles have led the industry to revise its expectation of future nickel demand from the battery section. The International Nickel Study Group has forecast a nickel market surplus of 198,000t for 2025, rising from 179,000t in 2024. But new ternary precursor cathode active materials projects will support a rise in nickel usage in the medium term, the group said.

As higher raw material prices continue to chip away at producer margins, upcoming projects including QMB New Energy Materials' phase 3 in Morowali, and developments by Guangqing and Blue Sparkling Energy in Weda Bay may have to be postponed, market participants said. The three projects are expected on line this year, adding 844,000 t/yr of sulphur demand at capacity.

By Chi Hin Ling, Deon Ngee

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

19/06/25

India's new steel input quality rule to curb imports

Mumbai, 19 June (Argus) — India's ministry of steel has issued an order stating raw materials used in imported finished steel products should meet Indian quality standards. This is likely to restrict imports, resulting in shortages of specialty steel products used by the automotive industry and other consumers, industry participants said. The order, issued on 13 June, will now require semi-finished products such as slab, billets and ingots to comply with Indian standards, even if the finished steel product already has a Bureau of Indian Standard (BIS) certification. If an overseas supplier has a BIS permit for IS 2062 grade hot-rolled coil, it will also need a similar certification for IS 14650-grade slab. For downstream products such as hot-dip galvanised steel, the input materials would constitute hot-rolled and cold-rolled sheets and strips, which would also need BIS certification, along with semi-finished products. Earlier exporters only needed BIS compliance for the final steel product and not the input material. The original quality control order covered 151 steel products. Steel consumers concerned A provisional 12pc safeguard duty implemented from 21 April has slowed imports of certain flat steel products. The new quality control rule, referred to by some industry participants as an additional "barrier" for imports, is applicable to imports with a bill of lading on or after 16 June. It has stoked concerns among micro, small and medium enterprises (MSMEs) that consume overseas steel not made in India, market participants said. The order "has triggered fears of massive losses and plant closures among MSMEs that rely on imported semi-finished steel," according to a report by think-tank the Global Trade Research Initiative (GTRI). "Many have already paid for shipments now deemed non-compliant," the report said. The automotive industry is likely to face production hurdles. Japan has been supplying a lot of specialty steel, which is not manufactured in India, to the Indian automotive industry, sources said. An automotive end-user said they were in talks with the government and declined to comment on the new order. "Steel users across India are shocked," an international steel trader said. In certain cases such as cold-rolled non-oriented steel, a type of electrical steel used in motors, the raw materials such as cold-rolled full hard steel (CRFH) or hot-rolled coil (HRC) may have BIS licence but inputs used to make CRFH or HRC may not meet Indian standards, the trader added. There is already a shortfall of certain speciality steel grades in India. Only about 12pc of the required 400,000t of cold-rolled grain-oriented steel (CRGO) was produced domestically in April 2023-March 2024, according to GTRI. The remaining volumes were imported from overseas suppliers such as China, Japan, Russia, and South Korea. India launched a new production-linked incentive scheme for speciality steel products this year, with less criteria for investment than the previous version. The new steel input quality rule is clearly in line with the government's "Make in India" initiative, a Mumbai-based trader said. It will now be difficult to get imports purchased in recent weeks by steel consumers, another Mumbai-based trading company said, adding that market conditions are tilting in favor of domestic producers. The new order is also expected to weigh on imports of plate from South Korean producers which do not have a BIS for certain input materials, the trader said. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Syrah restarts graphite production at Mozambique mine

19/06/25

Syrah restarts graphite production at Mozambique mine

Sydney, 19 June (Argus) — Australian minerals producer Syrah Resources has resumed graphite production at its 350,000 t/yr Balama mine in Mozambique and will restart large-volume shipments in September-December, following months of disruptions owing to protests. Syrah declared a force majeure on sales from Balama in December because of protests at the site, and this remains active, the company said today. But it has restarted production and intends to ramp up output at the mine to restock inventories for shipments in September-December, Syrah said. Its graphite exports in September-December will be shipped to customers outside China. The company is aiming to have a greater presence in ex-China markets and to increase sales from Balama this year, Syrah chairman Jim Askew told investors on 23 May. Syrah sold around 1,300t of natural graphite in January-March, using existing inventories. But the company failed to meet some sales obligations over the quarter. Non-violent protesters blocked access to Balama in September, citing farming resettlement grievances. The demonstrations worsened in October, after Mozambique's disputed general election triggered major protests across the country. Most protesters left the mine in April, after reaching a deal with Syrah, the company said last month —although some remaining demonstrators had to be removed by Mozambique authorities a month later. Syrah regained access to Balama on 3-4 May. Balama's operating infrastructure has not been impacted by the protests and is in good condition, Askew said in late May. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Brazil central bank raises target rate to 15pc

18/06/25

Brazil central bank raises target rate to 15pc

Sao Paulo, 18 June (Argus) — Brazil's central bank today raised its target interest rate by 0.25 of a percentage point to 15pc, the highest level since July 2006, citing a still "adverse and uncertain" global economic scenario. That is the seventh consecutive hike from a cyclical low of 10.5pc at the end of September last year. The bank had last increased the rate by 0.5 of a percentage point in May . "The [economic] scenario continues to require caution on the part of emerging countries in an environment of heightened geopolitical tension," the bank said, citing the US' "uncertain economic policies." The bank also said it increased the interest rate because Brazil's inflation remains above the ceiling of 3pc with a tolerance of 1.5 percentage points above or below. Annual inflation eased to 5.32pc in May . Central bank forecasts for 2025 and 2026 inflation remain at 5.2pc and 4.5pc, respectively, it said. "Inflation risks, both upside and downside, remain higher than usual," the bank said By Lucas Parolin Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US Fed sees 2 rate cuts in '25, eyes tariffs: Update

18/06/25

US Fed sees 2 rate cuts in '25, eyes tariffs: Update

Adds Powell comments, economic backdrop. Houston, 18 June (Argus) — US Federal Reserve policymakers kept the target interest rate unchanged today and signaled two quarter-point cuts are still likely this year while downgrading forecasts for the US economy in the face of largely tariff-driven uncertainty. The Fed's Federal Open Market Committee (FOMC) held the federal funds rate unchanged at 4.25-4.50pc, in the fourth meeting of 2025. This followed rate cuts of 100 basis points over the last three meetings of 2024, which lowered the target rate from more than two-decade highs. In the Fed's first release of updated economic projections since President Donald Trump's 2 April "Liberation Day" announcement of far-ranging tariffs, policymakers continued to pencil in two quarter-point rate cuts for the remainder of the year. "Changes to trade, immigration, fiscal and regulatory policies continue to evolve and their effects on the economy remain uncertain," Fed chair Jerome Powell told reporters after the meeting. "Today, the amount of the tariff effects — the size of the tariff effects, their duration and the time it will take, are all highly uncertain. So that is why we think the appropriate thing to do is to hold where we are as we learn more." Policymakers and Fed officials Wednesday lowered their median estimate for GDP growth this year to 1.4pc from a prior estimate of 1.7pc in the March economic outlook. They see inflation rising to a median 3pc for 2025 from the prior estimate of 2.7pc, with unemployment rising to 4.5pc from 4.4pc in the prior forecast. Economists have warned that Trump's erratic use of tariffs and plans to raise the national debt, along with mounting geopolitical risk highlighted by the latest Israel-Iran clashes, threaten to throw the economy into a recession or marked slowdown. Consumer confidence has tumbled and financial markets have been volatile while the dollar has slumped to three-year lows. Still, the labor market and inflation — the two pillars of the Fed's policy mandate — have remained relatively stable into the fifth month of Trump's administration. "As long as the economy is solid, as long as we're seeing the kind of labor market that we have and reasonably decent growth, and inflation moving down, we feel like the right thing to do is to be where we are, where our policy stance is and learn more," Powell said. US job growth slowed to 139,000 in May, near the average gain of 149,000 over the prior 12 months and unemployment has remained in a range of 4-4.2pc since May 2024. Consumer inflation was at an annual 2.4pc in May, down from 3pc in January. US GDP growth contracted by an annual 0.2pc in the first quarter, largely due to an increase in imports on pre-tariff stockpiling, down from 2.4pc in the fourth quarter and the lowest in three years. "What we're waiting for to reduce rates is to understand what will happen with the tariff inflation," Powell said. "And there's a lot of uncertainty about that. Every forecaster you can name who is a professional is forecasting a meaningful increase in inflation in coming months from tariffs because someone has to pay for the tariffs." Before Wednesday's FOMC announcement, Trump made a rambling attack on the Fed's policy under Powell, in remarks to reporters at the White House. "I call him 'too late Powell', because he's always too late" in lowering rates. "Am I allowed to appoint myself at the Fed? I do a much better job than these people." Powell's term in office as Fed chair expires in May 2026. Powell declined to directly address Trump's comments. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Tarifas podem incentivar interesse dos EUA na AL

18/06/25

Tarifas podem incentivar interesse dos EUA na AL

New York, 18 June (Argus) — As tarifas dos Estados Unidos causarão uma transferência de renda da Ásia para a América Latina devido aos maiores níveis de tarifas impostas aos países asiáticos, de acordo com o ex-secretário de comércio dos EUA, Wilbur Ross. A administração do presidente Donald Trump está mais rigorosa com os países asiáticos, como a China, comparado à maioria dos países da América Latina, e isso tornará a região mais atrativa para as empresas norte-americanas, disse Ross durante a convenção Marine Money, em Nova York. "Se você perceber, muitos países asiáticos estão sendo sujeitados a tarifas em torno de 40pc, o que é basicamente dizer 'você não fará negócios conosco' porque 40pc não é uma tarifa absorvível", disse. "Ao passo que a maioria dos países latino-americanos estão sujeitos a uma tarifa de 10pc." Trump pausou o aumento de tarifas na maioria dos países por 90 dias em abril, mas elevou as tarifas na China. No último mês, os EUA e a China concordaram em cortar as tarifas bilaterais até agosto após negociações comerciais em Genebra, na Suíça. Mas Ross disse que ficou surpreso ao ver fortes tarifas mirando o Vietnã, uma vez que tem servido como polo de transbordo de exportações para os EUA para contornar as tarifas da China que começaram durante a gestão anterior de Trump. Ross previu que haverá um acordo comercial entre os EUA e o Vietnã, devido a Trump não ter razão para ser repressivo com o Vietnã e porque a China e o Vietnã são inimigos históricos. "Com sorte, eles chegarão a um acordo porque seria um pouco estranho ter encontrado neles uma reposição à China e puni-los por ter realizado essa missão", disse. Ross também disse que a aprovação de Trump à aquisição da siderúrgica US Steel pela contraparte japonesa Nippon Steel é um sinal de esperança para um acordo comercial com o Japão, porque ele não acha que o presidente teria assinado o acordo se ele não previsse um acordo mais amplo com o Japão. Por Luis Gronda Envie comentários e solicite mais informações em feedback@argusmedia.com Copyright © 2025. Argus Media group . Todos os direitos reservados.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more