Mexico GDP outlook falls in May survey

Spanish Market: Crude oil, LPG, Metals, Oil products
03/06/25

Private-sector analysts lowered Mexico's 2025 GDP growth forecast in the central bank's May survey for a sixth consecutive month, with trade policy cited as the top concern.

The latest outlook estimates 0.18pc annual growth this year, down from 0.2pc in the April survey. The 2026 forecast also slipped for a third consecutive month, dropping to 1.4pc from 1.5pc in April.

Mexico's economy grew at an annualized rate of 0.6pc in the first quarter, according to statistics agency Inegi. While slightly above the 0.5pc posted in the fourth quarter of 2024, it was the second-slowest quarterly growth in the last 16 quarters.

Foreign trade remained the top risk to GDP growth over the next six months in the May survey, followed by domestic security.

Year-end 2025 inflation expectations rose for a second straight month to 3.9pc in May from 3.8pc in April. CPI accelerated for a third consecutive month in April to an annualized 3.8pc, after reaching a four-year low of 3.59pc in January, according to Inegi.

Despite the acceleration, the central bank later issued its third half-point cut to the target interest rate, lowering it to 8.5pc. It then reiterated support for further rate cuts to its target interest rate during its 28 May quarterly presentation, citing growth concerns and core inflation — excluding volatile food and energy — holding below 4pc for eight months.

Survey respondents lowered their end-2025 forecast for the central bank's target rate to 7.5pc from 7.75pc in April.

The peso is now expected to close 2025 at Ps20.50/$1, stronger than the Ps20.81/$1 forecast in April. The end-2026 forecast moved to Ps21.00/$1 from Ps21.25/$1.

By James Young

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

19/12/25

Mexico central bank cuts target rate to 7pc

Mexico City, 19 December (Argus) — Mexico's central bank cut its benchmark interest rate by 25 basis points to 7pc, its lowest level since June 2022, maintaining a slower pace in the easing cycle on inflation concerns. The decision marked the eighth rate cut this year and the fourth quarter-point reduction following four consecutive half-point cuts. This year's cuts follow five quarter-point cuts in 2024 from a cyclical peak of 11.25pc in March. The board approved the cut in a 4-1 vote, with deputy governor Jonathan Heath dissenting in favor of holding the rate at 7.25pc. Heath has been the lone dissenter in the past five decisions, consistently urging greater caution. The central bank said the decision reflected "the behavior of the exchange rate, the weakness of economic activity and the possible impact of changes in global trade policies," repeating language used in its last four statements. Gabriela Siller, chief economist at Banco Base, pointed to a "significant change" in the bank's forward guidance, noting a shift toward a less dovish tone. The board said it "will consider when to make further adjustments" to the policy rate, replacing the "will consider cutting" language used in November. Mexican bank Banorte also said the central bank struck a less dovish tone, pointing to a change in its forward guidance. Annual inflation rose to 3.8pc in November from 3.57pc in October, according to statistics agency Inegi. Core inflation, which excludes volatile food and energy prices, accelerated to 4.43pc from 4.28pc. The central bank now sees headline inflation ending 2025 at 3.7pc, up from 3.5pc in its November forecast, while core inflation is projected at 4.3pc, revised from 4.1pc. It also raised its headline and core forecasts for the first two quarters of 2026, while maintaining that both will converge to its 3pc target by the third quarter. The bank said the revisions mainly reflect a "more gradual-than-expected" easing in services inflation, along with a smaller contribution from accelerating consumer goods prices. The board also addressed recent tax reforms, which it expects will have a temporary and not necessarily proportional impact on prices, adding it will update its forecasts as it conducts a comprehensive assessment of the revised tax code's effects. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Viewpoint: Al industry faces structural Europe decline

19/12/25

Viewpoint: Al industry faces structural Europe decline

London, 19 December (Argus) — The European aluminium industry has heard some highly optimistic forecasts for prices and demand recovery in 2026 at a series of late-year industry events that started with London Metal Exchange (LME) Week in October. But that optimism rests on assumptions of a sharp recovery in demand for which there is no real evidence, and concerns are growing that the extended downturn in European manufacturing represents a more structural shift in global industrial power. Some industry analysts forecast in October that LME aluminium prices could reach $3,000/t by the end of 2025, and even threaten the $4,000/t mark at some point in 2026. The forecasts assumed a continuation of the supply tightness that has become a major driver of global aluminium markets in 2025 as Chinese output has neared its production cap of 45mn t/yr and production growth has also slowed elsewhere, as many regions focus away from capacity expansion. But the bullish price projection was also supported by expectations of a recovery in demand from manufacturing industries following a lengthy period of contraction, particularly in Europe. With demand levels for aluminium-intensive goods currently well below trend, those analysts foresee a much better demand outlook for next year. But the reality may be that the downturn in aluminium demand in Europe is more structural, and as a result there is no reason to expect a significant improvement just because it is due in an historical context. The automotive sector is a particularly potent example. After a steep fall in manufacturing rates in 2020 because of the Covid-19 pandemic, Europe's automotive sector has yet to recover to 2019 levels. Production even fell back in 2024 by more than 6pc from the previous year on strong competition from China and lower consumer spending because of high inflation and rising interest rates. European car production fell further in the first half of 2025, by 2.6pc on the year as stricter emissions targets, high energy costs and US import tariffs hit output. Even relief in the form of falling interest rates or more affordable energy would not be enough to bring European car manufacturing back to 2019 levels. As European output has fallen, other countries have risen to take its place. Global car production grew by 3.5pc in the first half of this year, with Chinese output jumping by 12pc on the back of climbing electric vehicle (EV) sales, thanks to policy support and, crucially, rising exports. As Europe once led the world in internal combustion engine markets, so China is now leading in EVs. "The European industry sold ICE [internal combustion engine] cars all over the world, including to China, but that era is now over," executive director of clean transport think tank Transport & Environment William Todts said at the European Aluminium Summit in Brussels last month. "Fifty percent of the Chinese market has gone, and the European market is shrinking. That transformation is extremely challenging." Europe must recognise this new world order and adjust its policy goals accordingly. Much of Europe's trade and industry policy was designed for the dominant global industries the region enjoyed in the past, and new policies must be enacted to support new markets or the downturn in European manufacturing will extend further and deeper. "I'm very worried about the downturn being structural. Europe has huge energy costs and I don't see carmakers growing against the Chinese competition," chief executive of aluminium products manufacturer HAI Group Rob van Gils said in Brussels. "I don't think it's a cycle and it will be very tough in the next couple of years," he added. "We need an evergreen approach. Europe is just surviving. It is not innovating. Industry is stuck." By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Viewpoint: Bitumen markets eye pockets of demand

19/12/25

Viewpoint: Bitumen markets eye pockets of demand

London, 19 December (Argus) — Paving activity may strengthen in some European and north African markets in 2026, but several others are expected to see continued declines in bitumen demand. Germany could lead any recovery, market participants said, as a new government plans to expand and maintain the road network. The country — once Europe's bitumen powerhouse — had a weak 2025, but paving work is expected to lift consumption from mid-2026. German bitumen demand has fallen by more than 20pc since 2021, while France and the UK are down by over 25pc in the same period. Budget constraints and high inflation drove these declines. Sweden, Norway and Denmark — already demand drivers in 2025 — could strengthen further in 2026. Road budgets are set to rise as governments prioritise infrastructure and the value of well-maintained highways, possibly linked to higher defence spending as Nato strengthens in Europe. North Africa has also drawn European Mediterranean surplus cargoes , and market participants expect demand from the region to increase next year, led by Algeria, Morocco and some Libyan consumption. Elsewhere, there is little cause for optimism. In France, most participants expect 2026 demand to be weaker than in 2025. With the government beset by regular upheaval and parlous public finances, road spending seems an unlikely priority. Several other northwest and central European countries will also see steady to lower bitumen consumption in 2026. Meanwhile, prospects for a peace deal between Ukraine and Russia remain slim, so a large upswing in Ukrainian import demand looks unlikely next year. Export opportunities outside Europe also appear limited, as Asia-Pacific and the Middle East remain well supplied and demand there stays slow. South Africa, now reliant on imports, is more likely to source from the Mideast Gulf or Pakistan than from the Mediterranean. The prospects of shipping product to the US could improve in the coming months, with Mediterranean bitumen values currently firm relative to crude and fuel oil. But large volumes seem unlikely. Some Mediterranean cargoes moved to the US last year, but the trend was short-lived. In the bitumen freight market, several new larger tankers will enter service in 2026, increasing vessel availability in what will still be a weak market. This could weigh on freight rates but help offset higher costs from the EU ETS scheme, which comes fully into effect in 2026 after its 2024 implementation. Bitumen prices fell in 2025 and are expected to stay under pressure through winter, before seasonal gains from March 2026. Markets should see greater strength relative to fuel oil in summer as bitumen demand typically rebounds then. Demand for bitumen was generally weaker across most European countries in 2025 than in 2024, weighing on prices. Budgets came under pressure and political challenges contributed to a lack of focus on infrastructure and road maintenance spending. Bitumen prices hit historic lows in 2025, partly offsetting inflation-driven increases in building, equipment and material costs. By Jonathan Weston Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Viewpoint: Indonesia’s MHP surge to hit nickel prices

19/12/25

Viewpoint: Indonesia’s MHP surge to hit nickel prices

Singapore, 19 December (Argus) — Indonesia is likely to expand its mixed-hydroxide-precipitate (MHP) plant capacity further in 2026, supported by record-high cobalt prices and strong production economics, a move that could deepen nickel oversupply and weigh on prices. Current output Indonesia's MHP output is projected to reach 482,000t in nickel metal equivalent this year — almost a 50pc rise from 2024, according to Argus estimates. Argus -assessed 37pc nickel payable MHP prices have fallen by 2.6pc on the year to $127.40/metric tonne unit (mtu) so far in 2025, while Class 1 nickel prices have dipped from $17,000/t to around $15,350/t over the same period. Nickel prices will likely remain depressed in the low-$15,000s/t range in 2026 because supply expansion is outpacing demand growth. Demand has slowed as the electric vehicle (EV) market growth has cooled in recent years, with annual growth in global EV car sales slowing from 26pc in 2024 to 23pc in 2025. Nickel demand growth could also face further headwinds from increasing competition from other battery types such as nickel-free lithium-iron-phosphate and high-manganese chemistries. This could increase the nickel surplus, further weighing down on overall nickel prices. Indonesia has consolidated its position as the leading global MHP supplier after most Western plants halted operations in late 2023. The country currently hosts around 10 operating MHP projects with a combined designed capacity of about 440,000 t/yr of nickel. Most projects are owned by Chinese giants Ningbo Lygend, Green Eco-Manufacture (GEM), and Huayou, in collaboration with local producers Merdeka, Harita Nickel, and PT Vale Indonesia (PTVI). MHP capacity expansion More MHP projects are expected in the near-term, bolstered by elevated cobalt prices, as MHP typically contains 2-5pc of cobalt. Refineries have been seeking cobalt alternatives because of constrained supply following export restrictions imposed by the Democratic Republic of Congo (DRC) since February. Indonesia's cobalt feedstock capacity is projected to hit around 65,000 t/yr in 2026, while global cobalt supply is expected to hit 210,000t over the same period, according to Argus data. The lucrativeness of MHP in comparison with other nickel products, such as nickel pig iron (NPI), is another driver for investment. MHP production cost: $10,500–11,000/t (December estimate) Processing cost to convert MHP into nickel metal: $3,000–3,500/t Total cost for MHP to nickel metal: $13,500–14,500/t NPI to nickel metal cost: $14,000–14,500/t Additionally, cobalt by-product sales (around $2,000/t) help offset MHP production costs, effectively reducing net costs to $11,500–12,500/t, making MHP more lucrative than NPI. Outlook Concerns are mounting that rapid expansion of Indonesia's MHP capacity will further pressure on nickel prices. Argus forecasts Indonesia's MHP capacity to nearly double on the year to 862,000 t/yr in 2026, as several HPAL projects are scheduled to be commissioned in 2026. While not all capacity will translate into production, any additional output will add to an already oversupplied market, intensifying the glut. The overall nickel surplus is estimated at 212,000t in 2025 and is projected to reach 288,000t in 2026, according to Argus data. Indonesia has tightened its efforts to regulate nickel pricing and oversupply this year, reverting the validity period for RKAB mining quotas to one year. The government also suspended some nickel mines due to a lack of reclamation and post-mining guarantees, while lands were seized from Weda Bay Nickel and Tonia Mitra Sejahtera for lacking forestry permits. These policy changes have yet to significantly impact nickel prices, but remain critical factors that could disrupt supply and influence the price outlook. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US House passes bill to expedite permitting

18/12/25

US House passes bill to expedite permitting

Washington, 18 December (Argus) — The US House of Representatives on Thursday approved a bill designed to fast-track permitting for energy projects and reduce related litigation risks. But a last-minute change Republicans made to exclude some offshore wind and solar projects led some Democrats and a major clean energy group to withdraw support, complicating the bill's chances of passage in the Senate. The Republican-controlled House voted 221-196 to pass the SPEED Act, with 11 Democrats crossing the aisle to vote for what would be the most significant changes to federal permitting in years. The bill will now advance to the US Senate, where proponents will likely need to agree to make significant changes if they hope to pick up the votes of at least seven Democrats to avoid a filibuster. The bill "finally brings common sense by cutting red tape that dramatically increases the cost and, in some cases, just makes it economically unfeasible to do projects", House Republican majority leader Steve Scalise (R-Louisiana) said. The SPEED Act focuses on revising project reviews under the National Environmental Policy Act (NEPA), which is a source of delay and litigation risk for pipelines and renewable projects alike. The bill would require federal agencies to narrow those reviews and uphold those decisions even if federal courts find them to be inadequate. The bill would also provide permit "certainty" by limiting the government's ability to rescind prior approvals, averting a repeat of events like the cancellation of the Keystone XL pipeline. "We applaud the House for advancing the SPEED Act, a bipartisan, commonsense step toward fixing a federal permitting system that's long been broken," oil industry group the American Petroleum Institute said. Republican leaders were hoping 30-40 Democrats would join them to support the SPEED Act. The bill had broad bipartisan support when it was drafted because of provisions meant to prevent permitting delays that have plagued both oil and gas pipelines and renewable energy development. But Republican leaders, to satisfy far-right conservatives, made a change to the bill earlier this week that would prevent its expedited permitting procedures from benefiting any project that Trump's administration has blocked or revisited since 20 January. The Trump administration has targeted multiple offshore wind and solar projects this year and has ordered the developer of the nearly complete 704MW Revolution Wind project off the coast of Rhode Island to stop construction. That change fractured a bipartisan coalition that had spent months working on technology-neutral permitting language. The American Clean Power Association, the largest industry group for US renewable energy, on Wednesday withdrew its support of the bill , arguing the "poison pill amendment" that Republicans made eviscerated bipartisan language that gave expedited permitting treatment for all types of energy resources. A number of House Democrats who had backed the bill also withdrew their support. American Clean Power plans to work with both parties in the Senate to make changes. "This is not the final draft," representative Scott Peters (D-California) said during floor debate Thursday, vowing to work with his colleagues in the Senate to address House Democrats' concerns. By Chris Knight and Haik Gugarats Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more

Mexico GDP outlook falls in May survey

Related news posts

Mexico central bank cuts target rate to 7pc

Mexico central bank cuts target rate to 7pc

Viewpoint: Al industry faces structural Europe decline

Viewpoint: Al industry faces structural Europe decline

Viewpoint: Bitumen markets eye pockets of demand

Viewpoint: Bitumen markets eye pockets of demand

Viewpoint: Indonesia’s MHP surge to hit nickel prices

Viewpoint: Indonesia’s MHP surge to hit nickel prices

US House passes bill to expedite permitting

US House passes bill to expedite permitting

Argus Seaborne Coal Outlook

Argus Seaborne Coal Outlook

Argus Line Pipe

Argus Line Pipe

Argus Specialised Freight

Argus Asia Crack Spread Forward Curves

Argus Russian Domestic Crude Market

Business intelligence reports