Biden infrastructure plan to increase steel demand

  • Spanish Market: Coking coal, Metals
  • 16/04/21

The $2 trillion infrastructure plan proposed by President Joe Biden in March would increase steel demand in the US and help prop up sagging private sector nonresidential investment.

The eight-year plan, which includes broader initiatives such as high speed internet connectivity alongside traditional infrastructure projects, would put about $200bn into road and rail projects, which would lift demand for long steel products such as reinforcing bar (rebar) and wire rod.

Long product demand is expected to increase by up to 3mn short tons (st)/yr for the duration of the investment period while flat-rolled demand could increase by 1mn st/yr, according to Phil Gibbs, equity research analyst at KeyBanc Capital Markets. Combined, that would account for 3-4pc growth in US steel demand based on the nearly 110mn st consumed in 2019, according to the American Iron and Steel Institute (AISI).

The increased demand could also prop up sagging investments by private industry in nonresidential construction, which has declined year-over-year for the last 10 months, according to data from the US Department of Commerce.

Private nonresidential construction consists of office buildings, hotels, and other steel-consuming structures that have seen investments fall off during the Covid-19 pandemic and slump as more people worked from home and stopped traveling.

Public infrastructure like roads and bridges could also consume some of the steel that the private sector is no longer using.

"The infrastructure bill is nice, but it may be necessary to offset the cyclical decline in private sector spending," Gibbs said. "And we don't know when this spending, if it comes to bear, when it all really plays out."

Gibbs also suggested the Biden Administration may use the infrastructure package, which will use higher corporate taxes to pay for it, as a reason to ease the 25pc Section 232 tariffs that were imposed on steel imports by then-President Donald Trump in March 2018.

Many have blamed the tariffs for keeping flat-rolled imports into the US at lower levels even as the steel price has more than tripled in the last eight months. The Argus US hot-rolled coil (HRC) Midwest assessment rose to $1,364/st on 13 April, up from a low of $450/st recorded in mid-August 2020.

Total steel imports in 2020 were 20mn metric tonnes (t), down by 21pc compared to 2019 and the lowest levels since 2009, according to the US Commerce Department.

While infrastructure packages are held up by many in the US steel industry as a boon for the market, whatBiden's plan will fund consumes less steel than the types of investments a country like China is making, said Andreas Bokkenheuser, an analyst with UBS.

"China is building infrastructure where there is no infrastructure, and that is very materials intensive," Bokkenheuser said. "That's not what we're doing. We are going to step in and repair existing infrastructure, which again, is just not overly materials intensive. It consumes materials but pound for pound it's not the same impact."

Bokkenheuser agreed that long products will benefit the most, and said that even with the 25pc tariffs, countries like Turkey have been able to import products like rebar, which is needed for the construction of roads and buildings. He expects that if the infrastructure bill is passed in mid-2021, that the steel industry should start feeling impacts within six to 18 months.

Out of the 981,000t of rebar products exported to the US in 2020, Turkey accounted for 424,000t of that figure, with Mexico, which has no tariffs on its exports to the US, and Spain making up the bulk of the remainder.

Nonres private construction mn $

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

19/04/24

India mulls using more natural gas in steel sector

India mulls using more natural gas in steel sector

Mumbai, 19 April (Argus) — India's steel ministry is considering increasing natural gas consumption in the sector as it aims to lower carbon emissions from the industry. Steelmakers held a meeting with the steel ministry earlier this month, to discuss challenges and avenues to increase gas allocation to the sector, according to a government document seen by Argus . Steel producers requested that the government set gas prices at an affordable range of $7-8/mn Btu for them, to make their gas-based plants viable, as well as for a custom duty waiver on LNG procured for captive power. India's LNG imports attract a custom duty of 2.5pc. City gas distribution firms sell gas at market-determined prices to steel companies. Representatives from the steel industry also requested for the inclusion of gas under the purview of the country's goods and service tax, and to be given higher priority in the allocation of deepwater gas, which has a higher calorific value. Deepwater gas is currently deployed mostly to city gas distribution networks. Steelmakers are currently undertaking feasibility tests for gas pipeline connectivity at various steel plants. But a gas supply transmission agreement requires a minimum five-year period for investment approval. The steel industry is heavily reliant on coal, and the sector accounts for about 8-10pc of carbon emissions in the country. A task force of gas suppliers including IOC, Gail, BPCL, Shell, and HPCL and steel producers like Tata Steel, AMNS, All India Steel Re-roller Association and the Pellet Manufacturers Association has been set up, and the team is expected to submit a report on increasing natural gas usage and lowering carbon emissions by 15 May, the government document said. This team is one of the 13 task forces approved by the steel ministry to define the country's green steel roadmap. The steel ministry aims to increase green steel exports from the country in the light of the policies under the EU's Carbon Border Adjustment Mechanism (CBAM), which will take effect on 1 January 2026. Under the CBAM, importers will need to declare the quantity of goods imported into the EU in the preceding year and their corresponding greenhouse gas emissions. The importers will then have to surrender the corresponding number of CBAM certificates. CBAM certificate prices will be calculated based on the weekly average auction price of EU Emissions Trading System allowances, expressed in €/t of CO2 emitted. This is of higher importance to Indian steelmakers as the EU was the top finished steel export destination for Indian steelmakers during the April 2022-March 2023 fiscal year with total exports of 2.34mn t, and has been the preferred choice for Indian steel exports in the current fiscal year owing to higher prices compared to other regions. Indian steelmakers have started to take steps to lower their carbon emissions by announcing collaborations with technology companies to decarbonise, and are trial injecting hydrogen in blast furnaces, and increasing the usage of natural gas in ironmaking. By Rituparna Ghosh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ISRI rebrands to ReMA, drops scrap from name


18/04/24
18/04/24

ISRI rebrands to ReMA, drops scrap from name

Las Vegas, 18 April (Argus) — The Institute of Scrap Recycling Industries (ISRI) has rebranded to the Recycled Materials Association (ReMA). The new name and rebrand better reflect the evolution within the recycling industry and its member companies, ReMA said at the group's annual convention and exposition in Las Vegas today. Washington, DC-based ReMA represents recycling industries including ferrous and nonferrous metals, electronics, glass, paper, plastics, textiles and tires and rubber. It is a member-driven trade organization that provides advocacy, education, safety and compliance training, and promotes public awareness of the vital role recycled materials play in the US economy, global trade, the environment and sustainable development. ISRI was formed in 1987 when the Institute of Scrap Iron and Steel merged with the National Association of Recycling Industries. Over the last 35 years, the association has seen tremendous growth in size and diversity of its membership, particularly in electronics, consumer brands and EV battery sectors. The trade association has around 1,700 member companies across the US and other 40 countries. By Brad MacAulay Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

BHP cuts Australian met coal sales guidance again


18/04/24
18/04/24

BHP cuts Australian met coal sales guidance again

Sydney, 18 April (Argus) — Australian mining firm BHP has cut its coking coal guidance for the 2023-24 fiscal year to 30 June to a new decade-low of 43mn-45mn t because of the impact of wet weather and cyclones on its Queensland operations. The BHP Mitsubishi Alliance (BMA), which is 50pc owned by BHP and 50pc by Japanese trading house Mitsubishi, had already cut its guidance by 18pc in January to 46mn-50mn t of metallurgical coal for 2023-24, down from the previous guidance of 56mn-62mn t issued in July. At that time it cited the impact of the sale of the Blackwater and Daunia coking and thermal coal mines in Queensland to Australian independent Whitehaven, which it completed on 2 April, maintenance, a fatality at its 10mn t/yr Saraji mine and increased removal of waste. The latest downgrade was blamed again on the Saraji incident, as well as on wet cyclonic weather in Queensland and an inventory rebuild after the impact of flooding and labour shortages in 2022 and 2023. The inventory rebuild will continue into calendar year 2025, which could further weigh on sales into 2024-25. The further reduction in expected sales volumes led BHP to increase its cost guidance for 2023-24 to $119-125/t from $110-116/t in January and from $95-105/t in June. BHP received an average price of $274.99/t for hard coking coal and $204.55/t for weak coking coal during July-December, up from $242.52/t and $190.74/t for January-June and $270.65/t and $252.12/t in July-December 2022. It defines hard coking coal as those with a coke strength after reaction (CSR) of 35 and above, with weak coking coal being those with a CSR of below 35. Argus last assessed the premium hard low-volatile metallurgical coal price at $249/t fob Australia on 17 March, down from $336.50/t on 17 January. By Jo Clarke BHP metallurgical coal sales (mn t) Jan-Mar '24 Oct-Dec '23 Jan-Mar '23 Jul-Mar '23-24 July-Mar '22-23 Coking coal 5.41 4.76 5.37 14.66 16.86 Weak coking coal 0.93 0.75 0.71 2.21 2.04 Thermal coal 0.02 0.20 0.10 0.52 0.80 Total BMA 6.36 5.71 6.19 17.39 19.70 Total BMA (100%) 12.72 11.41 12.37 34.78 39.39 Source: BHP Australian metallurgical coal prices ($/t) Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Australia provides $256mn to high-purity alumina plant


17/04/24
17/04/24

Australia provides $256mn to high-purity alumina plant

Sydney, 17 April (Argus) — Australia's federal Labor government will offer A$400mn ($256mn) in loans to a high-purity alumina (HPA) processing facility, as part of its recently announced Future Made in Australia policy. Canberra has granted Australian developer Alpha HPA the funds via two separate agencies. The Northern Australian Infrastructure Facility and Export Finance Australia's (EFA) A$4bn critical minerals facility will each offer A$160mn and the two agencies will jointly fund a further A$80mn cost overrun facility, with drawdown on the grants contingent on Alpha HPA securing letters of intent for 10,000 t/yr in output. The announcement comes after the Queensland government provided A$21.7mn for the second stage of the facility at the industrial city of Gladstone in Queensland state. Australia's other HPA producer is Cadoux, formerly FYI Resources , is planning a 10,000 t/yr operation in Western Australia (WA) state's Kwinana industrial zone. The firm received an A$3mn grant from the WA government in November for an initial small-scale production plant. Graphite grant Canberra also brought forward an A$185mn EFA loan to Australian emerging graphite producer Renascor for stage 1 of its proposed vertically integrated battery anode material manufacturing project. A downstream graphite concentrator plant is planned for South Australia state with feedstock from the Siviour deposit, the largest outside Africa, Renascor said on 17 April. The original loan was approved in 2022, and Canberra said the concentrator project will now be realised sooner. Stage 2 will produce Australian-made purified spherical graphite for use in lithium-ion batteries required for electric vehicles and renewable technologies, Canberra said. Renascor is progressing advanced engineering designs for the mineral processing plant and non-process infrastructure while discussing binding offtake terms with existing partners, as well as with other battery-anode market participants. By Tom Major Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Q&A: Ramaco adding production, sees market growth


16/04/24
16/04/24

Q&A: Ramaco adding production, sees market growth

New York, 16 April (Argus) — Randall Atkins is a founder and chief executive of metallurgical coal producer Ramaco Resources. He also has been involved in energy-related investment and financing activity for over 40 years. In this Q&A, edited for length and clarity, he discusses effects from the Francis Scott Key bridge collapse, his outlook for coal and the company's research projects. What effect has the Key bridge collapse and Port of Baltimore closing had on Ramaco and the US coal industry in general? Like most things of that tragic nature, it is going to take longer than everyone expects to actually solve the problem. I think where it is going to impact producers probably more is on the rails. There will be a need for...producers to rearrange stockpiles and to rearrange where they are going to try and ship, even at reduced levels. Particularly, CSX is going to have an immense logistical complexity to deal with over the near-term. We do not ship from Baltimore. We have not seen any problems, knock on wood, with our rail shipments post the incident. What are your long-term projections for metallurgical coal given expectations that low-volatile coal reserves will shrink in coming decades and the steel industry could be in oversupply? Low vol coal has traditionally been the highest priced coal and the dearest, if you will. High vol A coal has over the last few years grown in importance, and to the extent that there is any new increase in production in the US, it's high vol. What we perceive is that there is going to be a crowding in the high vol space. As a result, our increase in production is primarily in low vol. As far as the demand side is concerned, we do not believe that blast furnace steel demand is going to decline anytime soon. There's a lot of noise from the green community that hydrogen is going to replace coal in blast furnaces. We took some advice on that from the IEA…and when that question was posed (to IEA), the answer that was given was it would take about $1.5 trillion to build a pilot plant using hydrogen by 2035 and probably about another equal or greater sum to build a commercial facility by 2040. So, I don't lose a lot of sleep on the demand for coal for blast furnaces. What I do see shifting, however, is the US has held relatively steady at about 20mn short tons (18.1mn metric tonnes) of met coal demand over the last 10 to 15 years. The growth is clearly overseas, and the growth is clearly at the moment in Asia. When we started back in 2017, and 2018 was really our first year of production, we predominantly sold coal domestically; I think 80pc of our coal went to US steel mills. Now that is almost reversed. We're going to sell probably this year, 70pc overseas, and about a third or less domestically. With Europe moving towards electric arc furnace technology and significant new blast furnace capacity coming online in Asia, what kind of role will the US play as a coal supplier over the coming years? It is cheaper to use a blast furnace than electric arc. And the steel that they (Asian companies) mostly require is the heavier steel for cars and buildings and things of that nature. So, they have a bias towards blast furnace capacity. The US and Europe are very developed economies that are trying to go and wean away from coal, (while) the rest of the world is aggressively moving further into coal. People will shake their heads at the cost that European and American consumers will start to have to pay for that privilege. We see market growth is still there, but it's a different kind of growth. It will be more in the Asian markets, predominantly some in Europe, some in South America and Africa. The low vol coal demand in Asia is extremely strong because while they are able to buy high vol product from Australia very inexpensively, they do not have the low vol production. They need that to blend up to get the proper mix in their blast furnaces. There is a very good future for low vol, and that is the direction we are positioning ourselves. How confident is Ramaco about securing its investments in the longer run given the emphasis on ESG? What I see is sort of a dichotomy. In the thermal coal business, there's not a lot of investment in new mining there for the obvious reason that their customer base is declining. On the met side, it is a bit shortsighted from an investment standpoint because of the composition of the ownership of met coal companies. Virtually every major metallurgical coal producer except for us went through bankruptcy and post-bankruptcy proceedings. Their board composition became essentially distressed debt investors...Their interest was not developing a long-term coal company. Strategically their vision was: "How can we most quickly get money back out of that coal company?" We are certainly the only coal company that is doubling in size. We produced a little under 4mn st last year. We will be at about 4.5mn st this year. We can maybe go higher, depending upon the market. The market is not strong right now. The other issue (for coal producers) even when they weren't doing special dividends, is they've now shifted to doing large-scale share buybacks. You are starting to see the cost curve increase for most domestic coal producers. What you haven't seen, but I think you will probably find over the next probably 18 to 24 months, is you will begin to see depletion kick in. The amount of coal that they are able to produce from their existing operation will begin to decline. And that is strictly a result of not investing in new mine production. My approach was to kind of be a little bit of an outlier and then approach coal to products as an alternative use, certainly for thermal coal. And that, of course, brought us to rare earth (mineral extraction). Do you have funding for Ramaco's rare earth materials projects? Let me step back one step. We introduced the idea that we actually had rare earth (deposits) in May 2023….When we sent the samples to be tested, they tested them as if they were hard minerals. In other words, they did not combust off the organic material. What we have done since then, is we went back and we had samples that were probably 200-300 parts per million. From a commercial standpoint, we have kind of crossed the Rubicon that this is indeed sufficiently concentrated that it makes commercial sense. Now what we are doing is we are going through a process of further chemical analysis and testing to determine what is the best extraction and refinement technique. And the last point you raised was financing. We have a very nice growing mining metallurgical business, which can provide the funding to do whatever we want to do on rare earth. I am not too concerned about our financing capability. Any updates on your coal-to-carbon product projects ? We have looked at a number of different things with the national labs. We started looking at carbon fiber, which could be made from coal and we have got some patents around some very interesting processes. The areas that we are now focusing on...are using coal to make synthetic graphite. The other thing we are working on is using coal for direct air capture. We are considering going into a pilot phase sometime starting later this year with Oak Ridge National Laboratory on a synthetic graphite plant. As far as direct air capture, we probably have more work to do. We are also working on that with Oak Ridge. But I would hope that sometime by 2025, certainly 2026, we would perhaps have our first product, quote unquote, to be able to offer into the market. And it would be delightful if it was synthetic graphite. By Elena Vasilyeva Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more