Europe Al cuts continue despite power relief

  • Spanish Market: Metals
  • 21/03/23

Up to half of European aluminium production capacity was cut over the past two years as skyrocketing power prices slashed margins among all but the lowest-cost producers. But the cuts have continued even as power prices have fallen back, and despite all the capacity taken off line, prices have yet to recover from their precipitous falls that started a year ago.

More than 1mn t of annual aluminium capacity has been cut from European smelters as a result of high power prices since late 2021. Average monthly electricity wholesale prices peaked in August last year, in some cases settling 10 times higher than they were two years earlier.

Prices in Germany reached almost €470/MWh in August last year, from €47/MWh in March 2021, according to market and consumer data platform Statista. French prices jumped to €493/MWh from €50/MWh in the same period, and Italian prices reached €543/MWh from €60/MWh.

But power prices fell back significantly in September and October, and again in January. German prices fell by 71.1pc from their August peak to €136/MWh in January, with French prices dropping by 73.2pc and Italian prices falling by 67pc.

France's Aluminium Dunkerque, which operates one of Europe's biggest aluminium smelters, began restarting idled capacity in January, leading some market participants to predict that other producers would do likewise amid a more favourable energy market. Dutch TTF Natural Gas Futures fell below €50/MWh in February, the lowest level seen since August 2021 from an all-time high of €345/MWh in August last year.

But the aluminium capacity cuts have continued elsewhere in Europe, with a further two such announcements this month alone. Germany-based aluminium producer Speira will fully curtail its Rheinwerk smelter in Neuss because of high energy costs, while Slovenian producer Talum said it will halt operations at its smelter in Kidricevo, Slovenia.

Producer margins are still not adequate, even with power prices falling. Power prices remain up to three times higher in Europe than they were two years ago. Aluminium prices have not recovered enough to salvage producer margins, or even at all. London Metal Exchange aluminium prices peaked at over $3,950/t in March last year, following Russia's invasion of Ukraine in February. But prices fell to lows of just over $2,100/t in September, and after a brief recovery are down by almost 15pc this year from January highs of around $2,660/t.

Global aluminium production has continued to rise. Global aluminium output reached 5.27mn t in February, data from International Aluminium show, up by 2.69pc on the year. Chinese production rose by 4.5pc on the year in 2022 to reach 40.21mn t, and China's output has continued to grow this year, reaching 3.11mn t in February, up by 4.26pc on the year. This is despite power shortages prompting aluminium capacity cuts in Yunnan province.

It may be that the latest cuts to European aluminium production have less to do with power prices and instead reflect a structural shift of primary production eastwards. Speira's latest cuts may have been attributed to high power prices but the company has been transitioning to a pure aluminium rolling and recycling company since it was formed in 2020 from Norwegian aluminium producer Norsk Hydro's former aluminium rolling business. Talum's stoppage was likewise hung on power prices, but the smelter was only operating at 20pc capacity because of earlier cuts.

Restarting aluminium smelting capacity entails high costs, and so the power crisis has accelerated a structural shift and it is unlikely that any significant portion of curtailed European capacity will be restarted.

The European aluminium market has appeared vulnerable to an improvement in demand because of its curtailed supply picture, but consumers may avoid the worst of predicted price hikes that higher demand could cause if they secure access to new, lower-cost production in other locations.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

22/04/24

Hydro invests in metal recycling plant at Hoyanger

Hydro invests in metal recycling plant at Hoyanger

London, 22 April (Argus) — Norwegian aluminium producer Hydro has invested 240mn kroner ($21.8mn) in a new recycling facility alongside its primary aluminium smelter in Hoyanger, Norway. The recycling plant will process 36,000 t/yr of post-consumer aluminium scrap, as Hydro moves towards its 2030 target of reducing its emissions by 30pc compared with 2018 levels. The new facility will process scrap metal from vehicles, building facades, furniture, packaging and other consumer goods, which will be mixed with primary metal made with renewable hydropower at the Hoyanger plant. Among Hydro's low-carbon aluminium products is the Circal brand of aluminium, which is made with 75pc recycled content, and the Reduxa brand, which is made with renewable energy and generates emissions of less than 4kg CO2/kg aluminium produced. They are key to the company's emission reduction targets and ultimately reaching net zero by 2050. "Recycling is the fastest way to zero. With this new facility, we deliver on our strategy to increase recycling capacity in our efforts to decarbonise our own production processes and make products that the world needs for the green transition," the executive vice-president of Hydro's aluminium metal business, Eivind Kallevik, said. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Baltimore opens third temporary shipping channel


22/04/24
22/04/24

Baltimore opens third temporary shipping channel

New York, 22 April (Argus) — A third temporary shipping channel has opened at the Port of Baltimore to allow more vessel traffic around the collapsed Francis Scott Key Bridge. Located on the northeast side of the main channel, the new passage has a controlling depth of 20-ft, a 300-ft horizontal clearance, and a vertical clearance of 135-ft. When combined with two other temporary channels opened earlier this month the port should be able to handle "... approximately 15 percent of pre-collapse commercial activity," said David O'Connell, the federal on-scene coordinator. The main shipping channel of the Port of Baltimore — a key conduit for US vehicle imports and coal exports — is expected to be reopened by the end of May, the Maryland Port Administration said earlier this month. The bridge collapsed into the water late last month when the 116,851dwt container ship Dali lost power and crashed into one of its support columns. Salvage teams have been working ever since to remove debris from the water and containers from the ship in order to clear the main channel. By Stephen Cunningham Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

China's Lopal starts first Indonesian LFP battery plant


22/04/24
22/04/24

China's Lopal starts first Indonesian LFP battery plant

Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

International Graphite gets Western Australia funding


22/04/24
22/04/24

International Graphite gets Western Australia funding

Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output falls on year in March


22/04/24
22/04/24

Japan’s crude steel output falls on year in March

Tokyo, 22 April (Argus) — Japan's crude steel production fell on the year in March on the back of lower demand from the automobile sector, marking the first year-on-year decline in four months. The country produced 7.2mn t of crude steel during March, down by 3.9pc from a year earlier, according to preliminary data released by industry group Japan Iron and Steel Federation (JISF) on 22 April. The lower output is partly because of lower steel demand from the automobile sector, especially as fellow Japanese manufacturer Daihatsu suspended part of its operations since December 2023 after it was accused of tampering safety test results. Crude steel demand may not recover in April as Daihatsu will not reopen all its domestic facilities until 7 May . Japan's crude steel output is forecast to fall by 2.2pc from a year earlier to 21.7mn t in April-June, according to a quarterly forecast released on 11 April by the country's trade and industry ministry (Meti). The year-on-year fall is mostly attributed to weaker demand in the construction sector, especially housing, on the back of rising material costs and labour shortages, according to Meti. JISF separately said on 18 April that steel product demand from the non-housing construction sector during the April 2024-March 2025 financial year is forecast to fall from a year earlier. Demand would remain sluggish, a JISF researcher told Argus , despite several planned large construction projects including semi-conductor plants and data centres. Lower demand from other non-housing construction sectors, including office buildings weighed on overall demand, JISF added. The numbers were not disclosed. By Yusuke Maekawa Japanese ferrous output ('000't) Mar '24 Feb '24 Mar '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,626.4 5,467.5 5,909.1 2.9 -4.8 Specialty steel 1,570.6 1,521.5 1,576.8 3.2 -0.4 Total crude production 7,197.0 6,989.0 7,485.8 3.0 -3.9 Crude steel production method Basic oxygen furnace 5,144.5 5,123.0 5,529.5 0.4 -7.0 Electric arc furnace 2,052.5 1,866.0 1,956.4 10.0 4.9 Pig iron production 5,038.2 5,010.5 5,361.1 0.6 -6.0 Source: Japan Iron and Steel federation *Preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more