Generic Hero BannerGeneric Hero Banner
Latest Market News

CN fertilizer rail traffic fluid amid disruptions

  • Spanish Market: Agriculture, Biofuels, Coal, Coking coal, Crude oil, Feedgrade minerals, Fertilizers, LPG, Metals, Oil products, Petrochemicals, Petroleum coke
  • 24/03/20

Fertilizer shipments remain a priority for railroad Canadian National (CN) despite recent disruptions.

"The railroad is still moving, still humming and it is business as usual crossing the [Canada-US] border," CN senior vice president – rail centric supply chain James Cairns told Argus. "Our network is very fluid."

CN fertilizer and potash volume in the first quarter is up by 10pc compared with a year earlier, Cairns said.

CN expects that first quarter volume of potash will rise to one of the top three first quarters in the last decade.

"We are very keenly aware that keeping people fed is very, very important," Cairns said. "So, the application fertilizers, moving potash — we are keenly aware that we have a responsibility to keep those products moving."

Shippers remain concerned about disruptions by the coronavirus, particularly any effects on cross-border traffic between Canada and the US. The border is closed to retail and resident traffic, but rail operations have been allowed to continue and remain fluid.

CN is "a long way from having to make priority decisions," Cairns said. The railroad has excess capacity and could handle "a fairly significant uptick in demand if that was to come about," he said.

CN expects that some volume may shrink because of the coronavirus, such as crude and gas products. But any decline will free up resources that can be used elsewhere in the system.

Disruption to Canadian rail distribution would have limited impact on the US potash market in the short term but could have substantial impact on export markets for potash and sulfur.

US fertilizer distribution networks are well-covered for spring potash demand, with stocks elevated after a lackluster fall application. Disruption to rail distribution would likely not cause widespread shortages, as the greater risk to supply is from a lack of truck drivers. However, US sulfur markets are tight amid lower refinery run-rates, and a reduction in sulfur supply from Canada would exacerbate that.

Shipments by rail to west coast Canada and US ports are critical for Canadian potash and sulfur producers. Approximately 12mn metric tonnes/yr of MOP and sulfur is exported to non-US destinations by sea, most of which reaches the ports by rail.

Improved railroad operations are driving the volume growth and fluidity, Cairns said. CN is benefiting from significant capital investments it made in western Canada during the last few years.

The improvements have allowed the railroad to recover faster from system disruptions, including recent protests that blocked CN's main rail line connecting eastern Canada to the west and US midcontinent.

CN is in constant communication with customers, and so far demand has been steady, Cairns said.

"We really are focused on ‘is there going to be a lag in demand related to production as opposed to overall market demand?' And we have not seen it yet," he said.

There have been a few changes as some customers reduced shifts or split labor into two teams to limit virus exposure. Aside from that, business has been "pretty robust."


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

19/06/25

BMWE legt RED III Entwurf vor

BMWE legt RED III Entwurf vor

Hamburg, 19 June (Argus) — Das BMWE hat Verbänden am 19. Juni einen ersten Referentenentwurf zur Umsetzung der RED III vorgelegt. Diese sieht grundlegende Veränderungen zur Erfüllung der THG-Quote vor. Erste Preisindikationen steigen schlagartig. Um die auf EU-Ebene gültige dritte Fassung der Erneuerbare-Energien-Direktive (RED III) in deutsches Recht umzusetzen, hat das Bundesministerium für Wirtschaft und Energie (BMWE) einen Entwurf zur Anpassung des Bundes-Immissionsschutzgesetzes (BImSchG) vorgelegt. Unter anderem sieht der Entwurf vor, die Treibhausgasminderungsquote (THG-Quote) bis 2040 schrittweise auf 53 % zu erhöhen (siehe Grafik). Das bisherige Ziel war eine Quotenhöhe von 25,1 % im Jahr 2030. Auch der Pfad bis 2030 wurde leicht angepasst. Damit käme das Gesetz, wenn es in dieser Form umgesetzt wird, einer vielgeäußerten Forderung der Biokraftstoffindustrie nach, die sich für eine stärkere Quotenerhöhung eingesetzt hat. Infolgedessen melden erste Marktteilnehmer Angebote für Andere Zertifikate für das Verpflichtungsjahr 2026 in Höhe von 175 €/tCO2e. Für dieselben Zertifikate für 2025 werden 125 €/tCO2e geboten. Zusätzlich enthält der Entwurf einen Mechanismus, der im Falle einer Übererfüllung die Höhe der Quote im übernächsten Jahr erhöht. Ausschlaggebend ist dafür, ob die gesamte Quotenerfüllung in einem Jahr bereits ausreichen würde, um die Quotenhöhe des Übernächsten Jahres zu erfüllen. Darüber hinaus sieht der Entwurf vor, die Option zur zweifachen Anrechnung von als fortschrittlich geltenden Biokraftstoffen abzuschaffen und die Mindestquote zu erhöhen. Diese steigt dann bis 2030 auf 3 %. Zuvor lag das Ziel bei 2,6 %. Viele Marktteilnehmer haben gemutmaßt, dass die Doppelanrechnungsoption entfallen würde, um die benötigte Menge an Erfüllungsoptionen zu erhöhen. Auch welche Kraftstoffe zur Erfüllung der Quote genutzt werden können wird angepasst: So können keine Kraftstoffe auf Soja- oder Palmölbasis zur Erfüllung genutzt werden. Letzteres schließt auch Kraftstoffe aus Nebenprodukten der Palmölproduktion, allen voran Palmölmühlenabwasser (POME) ein. Dieses wurde in der Vergangenheit insbesondere genutzt, um die fortschrittliche Unterquote zu erfüllen, da es dank einer Sonderklausel trotz seiner Einstufung als fortschrittlich nur einfach zur Erfüllung der THG-Quote angerechnet werden konnte. Diese Regelung würde direkt ab Inkrafttreten der Gesetzesänderung wirksam werden. Die Anrechnungsgrenzen für futtermittel- und abfallbasierte Kraftstoffe werden ebenfalls angepasst: Während das Limit für futtermittelbasierte Produkte bis 2030 von 4,4 % der in Verkehr gebrachten Energiemenge auf 3 % reduziert wird, steigt das Limit für abfallbasierte Produkte wie Altspeiseöl (UCO) bis 2039 von 1,9 % auf 2,8 %. Zusätzlich wird eine Mindestquote für erneuerbare Kraftstoffe nicht-biogenen Urpsrungs (RFNBO) eingeführt. 2026 beträgt der energetische Mindestanteil 0,1 % und soll bis 2040 auf 12 % steigen. Zu den RFNBOs gehören unter anderem synthetische Kraftstoffe wie eFuels (PtL, Power-to-Liquid) und Grüner Wasserstoff. Der Entwurf erweitert den Geltungsbereich der THG-Quote außerdem auf den Luftverkehr. Bisher galt hier eine gesonderte Quote für erneuerbare Kraftstoffe. Darüber hinaus unterliegt nun auch der Seeverkehr der THG-Quote. In der Seefahrt genutzte Kraftstoffe, die im Straßenverkehr anrechenbar wären, können hierbei jedoch nicht für die Erfüllung genutzt werden. Damit soll vermieden werden, dass Unternehmen die Erfüllung ihrer Verpflichtung komplett vom Straßenverkehr auf die Seefahrt umwälzen. Der Entwurf sieht außerdem vor, dass erneuerbare Kraftstoffe nur noch angerechnet werden können, wenn Vor-Ort-Kontrollen der Produktionsstätten durch staatliche Kontrolleure ermöglicht werden. Dies soll das Betrugspotenzial bei der Anrechnung von Biokraftstoffen mindern. Der Entwurf liegt nun den Branchenverbänden vor. Ein Mitglied des Umweltausschusses erklärte am 4. Juni im Rahmen einer Podiumsdiskussion, dass der Entwurf nach Anpassung an eventuelle Verbandsvorschläge im Oktober dem Parlament zur Debatte vorgelegt werden soll und idealerweise zum 1. Januar 2026 in Kraft treten soll. Der Referentenentwurf sieht vor, dass die Änderungen an der THG-Quote mit Beginn des neuen Verpflichtungsjahres in Kraft treten. Dies soll Marktverwerfungen verhindern, für den Fall, dass die Gesetzesänderung innerhalb eines Verpflichtungsjahres in Kraft treten sollte. Von Svea Winter & Max Steinhau Entwicklung der THG-Quote bis 2040 Senden Sie Kommentare und fordern Sie weitere Informationen an feedback@argusmedia.com Copyright © 2025. Argus Media group . Alle Rechte vorbehalten.

ArcelorMittal halts DRI-EAF projects in the EU


19/06/25
19/06/25

ArcelorMittal halts DRI-EAF projects in the EU

London, 19 June (Argus) — Luxembourg-based steelmaker ArcelorMittal said it will not proceed with previously announced direct-reduced iron (DRI) and electric arc furnace (EAF) decarbonisation projects at Bremen and Eisenhuttenstadt in Germany, citing the unfavourable policy and market environment. The company initially planned to supply DRI from Bremen to the EAF in Eisenhuttenstadt after their construction. But in November last year, the company said it was unable to take final investment decisions on building the DRI-EAF assets in the EU because of challenging energy, policy and market environments that were not moving in a favourable direction. ArcelorMittal this week announced that it will carry out repair works on blast furnace 5A at its Eisenhuttenstadt site next week until 28 June, similar to the repairs last year. The blast furnace has capacity of 2.5mn t/yr. The company has urged the EU to accelerate enforcement of the carbon border adjustment mechanism (CBAM), strengthen trade protections and implement the EU Metals Action Plan to restore the competitiveness of low-emissions steel. In May, ArcelorMittal confirmed its intention to invest €1.2bn in a new EAF at its Dunkirk site in France. Market participants suggest the company was delaying its DRI investments in Ghent, Belgium, and Dunkirk, but the steelmaker has yet to comment. The French government in 2023 approved an €850mn grant to ArcelorMittal to decarbonise its Dunkirk asset. By Elif Eyuboglu Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Nationalisation may prop up surplus steel: Worldsteel


19/06/25
19/06/25

Nationalisation may prop up surplus steel: Worldsteel

New York, 19 June (Argus) — Redundant steelmaking capacity is unlikely to be reduced by decarbonisation and market forces, given global fragmentation and the focus on resilient supply chains, Edwin Basson, director general of international industry organisation Worldsteel, told Argus this week. "If you asked me five years ago, I would have said I suspect decarbonisation and market forces would have led to reductions in redundant capacities, but the few recent examples we've seen of nationalisation or re-nationalisation, quasi-nationalisation, will most likely see countries try to retain steelmaking capacity," Basson said on the sidelines of the Global Steel Dynamics Forum in New York. There are several instances of governments becoming involved in the operation of troubled mills in Europe and the UK. Basson said the industry's future direction depends on three main forces — environmental, employment and economic efficiency. In previous decades, economic efficiency was the main driver, allowing inefficient capacity to close or be modified. But the zeitgeist of reshoring, re-regionalisation and focus on employment has challenged this force, also contributing to the continued operation of surplus capacity that is not necessarily required by the market. "The strength of this efficiency force has reduced the labour and the environmental force is receiving more prominence at the moment. The moment you put a national interest filter on top of all of this, then the efficiency force becomes of minimal importance," he said. And there is limited room to consolidate producers in developed markets, such as the US and EU, given competition concerns, which also dampens cross-border consolidation to some extent. There is scope for consolidation in China, which is still behind the targets set by the government in the previous five-year plan — of 60pc of capacity being consolidated — and in smaller developing economies, shrinking the long tail of smaller producers. Worldsteel forecasts that half of all steel will still be made in blast furnaces in about 20 years from now, despite the current focus on decarbonisation. There is insufficient scrap in the world for the whole industry to move away from blast furnaces and insufficient high-quality direct-reduced iron feed, Basson said. In the EU, where decarbonisation is perhaps the most pressing issue as mills face mounting carbon taxes, the energy challenge is of particular significance. "There is a reason that Scandinavia is, at least in the EU, the home of very progressive decarbonisation producers," he said. "They have access to high-quality materials, direct-reduced iron and so forth, and access to high-quality sustainable energy that is not carbon-based. It's a very different story in other parts of northern Europe, where energy is a key question, and a different question again in the south, where it's energy and access to raw materials." "There will be multiple pathways to decarbonise, depending on location, and Europe may soften its policies to enable existing production routes to remain a force for a number of years longer," he said. Exponential breakthrough technologies related to the blast furnace could see emissions fall to a similar level as the gas-fed direct-reduced iron/electric arc furnace of 1.3-1.4t of carbon per tonne of steel. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Israel to undermine Iran regime after hospital hit


19/06/25
19/06/25

Israel to undermine Iran regime after hospital hit

Dubai, 19 June (Argus) — Israel's defence minister Israel Katz today said the military has been ordered to "undermine the ayatollahs' regime" in Tehran — the first time Israel has openly declared regime destabilisation as a goal since the conflict with Iran began last week. The shift in public messaging follows an Iranian missile strike early Thursday that appeared to hit a hospital in southern Israel. Social media footage showed damage to Soroka Medical Center in Beersheba, which serves around 1mn people. Iran's Islamic Revolutionary Guard Corps (IRGC) denied the hospital was targeted, saying missiles were aimed at nearby military command centres, according to Iranian state news agency Irna. Until now, Israel had justified its military campaign as a pre-emptive effort to prevent Iran from acquiring nuclear weapons. Katz's remarks reflect a significant hardening of Israel's public stance, moving beyond claims of self-defence to a declared aim of weakening Iran's leadership. "The Prime Minister [Benjamin Netanyahu] and I have instructed the [Israel Defense Forces] IDF to increase the intensity of attacks against strategic targets in Iran and against government targets in Tehran in order to remove threats to the State of Israel and undermine the ayatollahs' regime," Katz said in a post on social media platform X. Ice Brent crude futures rose today, supported by the latest Iranian-Israeli escalation and a sharp drop in US crude stocks. At 09:30 GMT, the front-month August Brent contract was at $77.14/bl, up by 44¢/bl from its settlement on 18 June. Ice Brent has gained nearly 8pc since Israel launched its initial strike on Iran on 13 June. Several Iranian missiles struck areas inside Israel early Thursday. Videos shared on social media showed damage in multiple locations, including civilian areas. The IRGC said it had "successfully carried out a 14th wave of combined missile attacks targeting strategic sites in Israel". Iran's attack followed Israeli airstrikes overnight on what Israel said were key sites linked to Tehran's nuclear and missile programmes. The IDF said it struck an "inactive nuclear reactor in Arak", a facility used in plutonium production, and a "nuclear weapons development site near Natanz". Natanz is home to Iran's main uranium enrichment facility, which Israel also targeted during its 13 June strike. The UN's nuclear watchdog, the IAEA, confirmed the Arak site had been hit. But "it was not operational and contained no nuclear material, so no radiological effects", the agency said. Iran had previously told the IAEA it planned to begin operating the reactor in 2026. US president Donald Trump has not confirmed whether Washington will join Israeli strikes on Iranian nuclear sites. "I may do it. I may not do it. I mean, nobody knows what I'm going to do," he said on 18 June. Iran's supreme leader Ali Khamenei earlier rejected Trump's call for Iran to surrender. By Bachar Halabi Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

India's new steel input quality rule to curb imports


19/06/25
19/06/25

India's new steel input quality rule to curb imports

Mumbai, 19 June (Argus) — India's ministry of steel has issued an order stating raw materials used in imported finished steel products should meet Indian quality standards. This is likely to restrict imports, resulting in shortages of specialty steel products used by the automotive industry and other consumers, industry participants said. The order, issued on 13 June, will now require semi-finished products such as slab, billets and ingots to comply with Indian standards, even if the finished steel product already has a Bureau of Indian Standard (BIS) certification. If an overseas supplier has a BIS permit for IS 2062 grade hot-rolled coil, it will also need a similar certification for IS 14650-grade slab. For downstream products such as hot-dip galvanised steel, the input materials would constitute hot-rolled and cold-rolled sheets and strips, which would also need BIS certification, along with semi-finished products. Earlier exporters only needed BIS compliance for the final steel product and not the input material. The original quality control order covered 151 steel products. Steel consumers concerned A provisional 12pc safeguard duty implemented from 21 April has slowed imports of certain flat steel products. The new quality control rule, referred to by some industry participants as an additional "barrier" for imports, is applicable to imports with a bill of lading on or after 16 June. It has stoked concerns among micro, small and medium enterprises (MSMEs) that consume overseas steel not made in India, market participants said. The order "has triggered fears of massive losses and plant closures among MSMEs that rely on imported semi-finished steel," according to a report by think-tank the Global Trade Research Initiative (GTRI). "Many have already paid for shipments now deemed non-compliant," the report said. The automotive industry is likely to face production hurdles. Japan has been supplying a lot of specialty steel, which is not manufactured in India, to the Indian automotive industry, sources said. An automotive end-user said they were in talks with the government and declined to comment on the new order. "Steel users across India are shocked," an international steel trader said. In certain cases such as cold-rolled non-oriented steel, a type of electrical steel used in motors, the raw materials such as cold-rolled full hard steel (CRFH) or hot-rolled coil (HRC) may have BIS licence but inputs used to make CRFH or HRC may not meet Indian standards, the trader added. There is already a shortfall of certain speciality steel grades in India. Only about 12pc of the required 400,000t of cold-rolled grain-oriented steel (CRGO) was produced domestically in April 2023-March 2024, according to GTRI. The remaining volumes were imported from overseas suppliers such as China, Japan, Russia, and South Korea. India launched a new production-linked incentive scheme for speciality steel products this year, with less criteria for investment than the previous version. The new steel input quality rule is clearly in line with the government's "Make in India" initiative, a Mumbai-based trader said. It will now be difficult to get imports purchased in recent weeks by steel consumers, another Mumbai-based trading company said, adding that market conditions are tilting in favor of domestic producers. The new order is also expected to weigh on imports of plate from South Korean producers which do not have a BIS for certain input materials, the trader said. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more