Generic Hero BannerGeneric Hero Banner
Latest Market News

Brazil hikes import tax on polymers, chemicals

  • Spanish Market: Petrochemicals
  • 19/09/24

Brazil's government increased import taxes of 30 polymers and chemicals to 20pc from 12.6pc this week, including polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC).

Another 32 chemical products remain under evaluation by Gecex, the Brazilian committee for commercial trade management. With the 18 September decision, most rates will rise and will remain at this level for 12 months.

Domestic manufacturers and chemical industries associations welcomed the decision, arguing that the measure will help level the playing field against foreign competitors who benefit from lower production costs. Brazil's chemical industry association Abiquim has been asking the government provide commercial protections for 62 products since May.

Supporters of the tax hike, including Abiquim, say it will help create jobs and strengthen Brazil's domestic economy. They also said that the increased revenue from the higher taxes can be reinvested in infrastructure and public services, further benefiting the country.

Brazilian petrochemical major Braskem said Thursday that it sees the tax increase as a positive step towards ensuring fair competition and fostering growth within the industry. Braskem produces basic chemicals, PE, PP and PVC.

The most important aspect of the tax increase is not the number of products covered, but what it represents in value, said Abiquim's executive president Andre Passos Cordeiro. "These 30 products that were approved represent about 65pc of the import volume of this set of 62 products that we had proposed to the government," he said. "They also represent 75pc of the value of this same set of imports. The decision is welcome, well-founded technically, and brings relief to the chemical industry."

The share of chemical imports in the Brazilian market soared in the last 20 years, according to Abiquim, reaching 47pc in 2023 from 21pc in 2000. In the first half of this year, the sector's trade deficit was close to $23bn, while the national industry's idle capacity reached its worst level ever.

"We were losing strength with the closure of factories and loss of jobs," Cordeiro said. "I reiterate that the government's decision was essential for us, as an industry and as Brazilians. A strong industry presupposes a strong country."

The Brazilian chemical industry is responsible for around 11pc of Brazil's GDP, according to Cordeiro

Taxes could up consumer costs

Critics of the tax hikes say they will increase costs for consumers and manufacturers who rely on imported polymers and chemicals.

Brazil's plastic industry association Abiplast said it was concerned that the higher import taxes will increase production costs for plastic products, which could result in higher prices for end consumers.

In a letter to associates, Abiplast said that the measure could hurt small- and medium-sized enterprises that do not have the same capacity as larger companies to absorb the increased costs.

The tax hike could also negatively impact the competitiveness of Brazilian products in the global market, Abiplast said. By increasing the cost of raw materials, Brazilian plastic converters may find it more challenging to compete with foreign companies that have access to cheaper inputs. That could lead to a decrease in exports and a potential loss of market share internationally.

Furthermore, opponents of the tax increase highlight that the measure could have unintended consequences on the broader economy. Higher production costs could lead to inflationary pressures, affecting the purchasing power of Brazilian consumers. They also point out that the tax increase may not necessarily lead to the desired boost in domestic production, as the domestic industry may not have the capacity to meet the increased demand for polymers and chemicals.

The letter, signed by the chairman of the association's board Jose Ricardo Roriz Coelho, also said that despite exhaustive explanations to the government about the taxes' downsides, final approval [of the tax hike] still goes through Brazil's partners in trade bloc Mercosur — Argentina, Uruguay, and Paraguay. If validated, the measure is expected to go into effect in October and last for one year. Abiplast said it will continue battling to reverse the measure, which the association deems unreasonable.

Higher domestic prices may follow

The market is taking some notice of the new proposed measures. One US polymers exporter to Brazil told Argus that if the tax hike becomes effective, Brazilian polymers manufacturers are expected to immediately raise prices to recover their margins.

"The timing for the tax hike announcement was fine-tuned to let local producers secure additional margins in a time that sales are expected to increase in Brazil due to Christmas and New Year celebrations," one market participant told Argus.

But any drop in polymer imports into Brazil from the taxes should recover in he beginning of next year, the source said. "Brazil's polymers production is not enough to address local demand, so imports will always be needed," the source said.

Brazil's January-August PE imports surged by 45pc from the same period in 2023, reaching almost 1.4mn metric tonnes. North America had a 79pc share, while South America had another 10pc. The country also buys from Asia and the Middle East.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

11/07/25

Mass-balance consultation questions remain: BlueAlp

Mass-balance consultation questions remain: BlueAlp

London, 11 July (Argus) — Some uncertainty remains over the correct interpretation of the draft of rules governing the inclusion of chemically-recycled plastics towards EU recycled content targets, BlueAlp chief executive Valentijn De Neve told Argus , but he said that an initial reading threw up some encouraging signs and some concerns. The European Commission opened a public consultation on a draft update of the implementing decision for the Single-Use Plastic Directive (SUPD) — which would provide details on how the 25pc recycled content requirement for PET beverage bottles can be met — on 8 July. It includes proposed rules around the use of mass-balance accounting to allocate chemically-recycled content. It is seen by many in the industry as a likely precedent for the rules that will apply to the EU's Packaging and Packaging Waste Regulation (PPWR), which will become the primary legislation governing recycled content targets for plastic packaging from 2030. De Neve said that he is still looking to understand the full connotations of the draft document put forward by the commission. At first reading he is encouraged that it appears to open up the possibility of plastic-derived pyrolysis oil (PPO) being processed in existing assets — refineries — as well as on-purpose upgrading facilities. This is "key in getting [the PPO market] to a realistic and larger market, and to fulfil the sustainability criteria that we've jointly set", he said. De Neve expressed some possible reservations on whether recognition of what share of input "really translates into circular plastics versus what becomes fuel" when the supply chain includes a refinery step has been "sufficiently captured" in the draft. But he said that he would discuss this within the Chemical Recycling Europe industry association, which would co-ordinate a response to the consultation. De Neve also said that the proposed extension of the definition of post-consumer plastic waste to include waste from products placed in non-EU markets — which would enable recyclates based on non-EU waste to count towards the recycled content targets — risks attracting import pressure from producers in lower-cost regions without sufficient additional controls. "We need to make sure… whether you're operating inside or outside the EU, that the same rules apply and it's a level playing field", he said. PPWR contains a so-called "mirror clause" stating that recyclers from outside the EU should be held to the same environmental standards as domestic operators. But no such clause exists in the SUPD, or elsewhere in the draft implementing decision released under consultation. By Will Collins Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

PVC producer Vynova to close Beek site


08/07/25
08/07/25

PVC producer Vynova to close Beek site

London, 8 July (Argus) — European chlor-vinyls producer Vynova said it intends to close its 225,000 t/yr PVC producing site in Beek, the Netherlands, by November 2025. The company said pressures on the site included "global overcapacity, persistently weak demand and increased competition from regions with lower production costs and less stringent regulations". Vynova said it did not expect these conditions to improve in the short term. The company also operates a 275,000 t/yr capacity PVC producing site in Mazingarbe, France, and a 340,000 t/yr site in Wilhelmshaven, Germany. Two PVC producing sites in Europe have already closed this year — a 135,000 t/yr capacity plant in Spolana, Czech Republic, and a smaller site operated by Fortischem in Slovakia. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US to lay out tariff demands in coming days: Trump


04/07/25
04/07/25

US to lay out tariff demands in coming days: Trump

London, 4 July (Argus) — The US will lay out its tariff demands on foreign trade partners in the coming days, President Donald Trump said today. From tomorrow, 5 July, Trump will send letters to 10-12 countries a day, with the aim that all countries will be "fully covered" by 9 July, Trump said. That rate will not cover the amount of tariff deals still to be done by the US, which to date has struck three deals — of 10pc with the UK and China and of 20pc with Vietnam. "[The tariffs will] range in value from maybe 60pc or 70pc tariffs to 10pc and 20pc tariffs," Trump said. Countries will start paying them on 1 August, he said. Since 5 April Washington has been charging a 10pc extra tariff on imports — energy commodities and critical minerals are exceptions — from nearly every foreign trade partner, and those rates could go higher after 9 July. Trump has justified those tariffs by citing an economic emergency caused by allegedly unfair trade practices in foreign countries, and his administration is engaged in talks with foreign governments with the nominal goal of lowering their trade barriers. By Haik Gugarats and Ben Winkley Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Japanese firms advance LCO2/methanol carrier project


03/07/25
03/07/25

Japanese firms advance LCO2/methanol carrier project

Tokyo, 3 July (Argus) — Japanese shipping firm Mitsui OSK Lines (Mol) and shipbuilder Mitsubishi Shipbuilding have made progress in developing an ocean-going liquified CO2 (LCO2) and methanol carrier, which would play a key role in establishing the country's carbon capture, utilisation and storage (CCUS) value chains. Mol and Mitsubishi have obtained approval in-principle (AiP) from Japanese classification society Class NK for their design concept of a LCO2/methanol carrier. The vessel would ship CO2 out of Japan and deliver CO2-based synthetic methanol (e-methanol) on return voyages to the resource-poor country, the companies announced on 30 June. The AiP certifies that the basic design of the vessel meets international regulation standards, such as technical requirements, as well as relevant safety restrictions covering the transportation of dangerous chemicals and liquefied gases in bulk. This is the world's first issuance of an AiP for a LCO2/methanol carrier, Class NK said. The approval is a major step forward for the companies, which hope to develop the vessel for commercialisation. The target date for its commissioning is still unclear. Mol expects the carrier to help meet Japan's growing demand for CO2 exports and e-methane imports with higher transport efficiency, unlike the use of a dedicated vessel for CO2 or methanol, which results in empty-cargo operation on half of the trips. E-methanol can be produced using CO2 and renewable hydrogen, which will contribute to decarbonising a variety of industries including the maritime shipping sector. Mol has previously invested in US synthetic fuel (e-fuel) producer HIF Global, while working with Japanese refiner Idemitsu and HIF subsidiaries HIF USA and HIF Asia Pacific to develop supply chains for synthetic fuel and e-methanol as well as CO2. HIF plans to produce around 4mn t/yr of e-methanol equivalent by 2030 at its production sites in Tasmania in Australia, Matagorda in the US, Magallanes in Chile and Paysandu in Uruguay by using green hydrogen and CO2, Mol has said. CCUS value chains would help fossil fuel-reliant Japan reduce its greenhouse gas (GHG) emissions by 60pc by the April 2035 to March 2036 fiscal year and by 73pc by 2040-41, against 2013-14 levels, before achieving the net-zero emissions by 2050. The Mol group, for its part, aims to reduce emissions intensity in transportation by 45pc against 2019 levels by 2035, as it works towards overall net-zero emissions by 2050. Japan's GHG emissions totalled 1.017bn t of CO2 in 2023-24 , down by 4.2pc from a year earlier to the lowest in 34 years, according to the country's environment ministry. This also reflected a 27pc decline against a 2013-14 baseline. By Japan Newsdesk Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Alternative-fuel ship orders fall in 1H 25: DNV


01/07/25
01/07/25

Alternative-fuel ship orders fall in 1H 25: DNV

Sao Paulo, 1 July (Argus) — Orders for new alternative-fuelled vessels fell in the first half of 2025 from a year earlier, according to Norway-based classification agency DNV. It said 151 new alternative-fueled vessels were ordered, down from 179 in the same period in 2024. These orders represented 19.8mn gross tonnes (GT), up by 78pc from the same period in 2024. LNG-fueled vessels accounted for 87 of the new orders in the first half, followed by methanol-fueled ships, with 40. DNV said 17 were LPG-fueled vessels, followed by hydrogen with four orders and ammonia with three. Orders for alternative-fueled vessels totaled 19 in June, up from 16 in May. The orders included 11 LNG-fueled vessels, four methanol-fueled ships, two hydrogen-fueled vessels, and two LPG carriers. By Natália Coelho New orders, 1H 2025 Fuel Number of vessels LNG-fueled 87 Methanol-fueled 40 LPG-fueled 17 Hydrogen-fueled 4 Ammonia-fueled 3 DNV Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more