Generic Hero BannerGeneric Hero Banner
Latest market news

Brazil hikes import tax on polymers, chemicals

  • Market: Petrochemicals
  • 19/09/24

Brazil's government increased import taxes of 30 polymers and chemicals to 20pc from 12.6pc this week, including polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC).

Another 32 chemical products remain under evaluation by Gecex, the Brazilian committee for commercial trade management. With the 18 September decision, most rates will rise and will remain at this level for 12 months.

Domestic manufacturers and chemical industries associations welcomed the decision, arguing that the measure will help level the playing field against foreign competitors who benefit from lower production costs. Brazil's chemical industry association Abiquim has been asking the government provide commercial protections for 62 products since May.

Supporters of the tax hike, including Abiquim, say it will help create jobs and strengthen Brazil's domestic economy. They also said that the increased revenue from the higher taxes can be reinvested in infrastructure and public services, further benefiting the country.

Brazilian petrochemical major Braskem said Thursday that it sees the tax increase as a positive step towards ensuring fair competition and fostering growth within the industry. Braskem produces basic chemicals, PE, PP and PVC.

The most important aspect of the tax increase is not the number of products covered, but what it represents in value, said Abiquim's executive president Andre Passos Cordeiro. "These 30 products that were approved represent about 65pc of the import volume of this set of 62 products that we had proposed to the government," he said. "They also represent 75pc of the value of this same set of imports. The decision is welcome, well-founded technically, and brings relief to the chemical industry."

The share of chemical imports in the Brazilian market soared in the last 20 years, according to Abiquim, reaching 47pc in 2023 from 21pc in 2000. In the first half of this year, the sector's trade deficit was close to $23bn, while the national industry's idle capacity reached its worst level ever.

"We were losing strength with the closure of factories and loss of jobs," Cordeiro said. "I reiterate that the government's decision was essential for us, as an industry and as Brazilians. A strong industry presupposes a strong country."

The Brazilian chemical industry is responsible for around 11pc of Brazil's GDP, according to Cordeiro

Taxes could up consumer costs

Critics of the tax hikes say they will increase costs for consumers and manufacturers who rely on imported polymers and chemicals.

Brazil's plastic industry association Abiplast said it was concerned that the higher import taxes will increase production costs for plastic products, which could result in higher prices for end consumers.

In a letter to associates, Abiplast said that the measure could hurt small- and medium-sized enterprises that do not have the same capacity as larger companies to absorb the increased costs.

The tax hike could also negatively impact the competitiveness of Brazilian products in the global market, Abiplast said. By increasing the cost of raw materials, Brazilian plastic converters may find it more challenging to compete with foreign companies that have access to cheaper inputs. That could lead to a decrease in exports and a potential loss of market share internationally.

Furthermore, opponents of the tax increase highlight that the measure could have unintended consequences on the broader economy. Higher production costs could lead to inflationary pressures, affecting the purchasing power of Brazilian consumers. They also point out that the tax increase may not necessarily lead to the desired boost in domestic production, as the domestic industry may not have the capacity to meet the increased demand for polymers and chemicals.

The letter, signed by the chairman of the association's board Jose Ricardo Roriz Coelho, also said that despite exhaustive explanations to the government about the taxes' downsides, final approval [of the tax hike] still goes through Brazil's partners in trade bloc Mercosur — Argentina, Uruguay, and Paraguay. If validated, the measure is expected to go into effect in October and last for one year. Abiplast said it will continue battling to reverse the measure, which the association deems unreasonable.

Higher domestic prices may follow

The market is taking some notice of the new proposed measures. One US polymers exporter to Brazil told Argus that if the tax hike becomes effective, Brazilian polymers manufacturers are expected to immediately raise prices to recover their margins.

"The timing for the tax hike announcement was fine-tuned to let local producers secure additional margins in a time that sales are expected to increase in Brazil due to Christmas and New Year celebrations," one market participant told Argus.

But any drop in polymer imports into Brazil from the taxes should recover in he beginning of next year, the source said. "Brazil's polymers production is not enough to address local demand, so imports will always be needed," the source said.

Brazil's January-August PE imports surged by 45pc from the same period in 2023, reaching almost 1.4mn metric tonnes. North America had a 79pc share, while South America had another 10pc. The country also buys from Asia and the Middle East.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
05/06/25

Growth, challenges for Mexico’s chemical industry: ANIQ

Growth, challenges for Mexico’s chemical industry: ANIQ

Houston, 5 June (Argus) — The Mexico chemical industry faces challenges in the coming years, said National Chemical Industry Association (ANIQ) foreign trade director Guillermo Miller said this week. There has been a decline in chemical production from Mexico's state-owned Pemex. The company produced around 9mn metric tonnes (t) of chemicals in 2010 but only 2.5mn t in 2024. This is a challenge to the industry which needs to find formulas that allow Pemex to increase production, Miller said at the UTECH Las Americas polyurethane conference in Mexico City, Mexico. Additionally, investment has slowed into the chemicals industry in Mexico. The last peak was in 2014 for a polyethylene project. Logistics also pose a challenge for the country and increase costs as the current infrastructure is forcing product to move around to be used, said Miller. Mexico currently relies heavily on imports of chemical feedstocks, with the majority coming from the US. The availability of raw materials is extremely limited, especially for byproducts of natural gas, ethane and propane. Despite these challenges, the chemical industry, which was 1.7pc of the country's GDP in 2024, is projected to have growth of 5pc on average over the next 10 years, Miller said. There also remains a strong demand for polyurethane since Mexico is in the top five countries for car and refrigerator production and is first in television production, said Miller. The country should focus on innovation, infrastructure, certainty in investments and addressing the raw material shortage, said Miller. By Catherine Rabe Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

LyondellBasell agrees sale of select assets: Correction


05/06/25
News
05/06/25

LyondellBasell agrees sale of select assets: Correction

Changes financial figures in third paragraph to € from $ London, 5 June (Argus) — LyondellBasell said it is in exclusive negotiations with Munich-based industrial investment firm Aequita, regarding the sale of four olefin and polyolefin assets in Europe. The deal includes its integrated cracker and polyolefin assets in Berre, France and Muenchmuenster, Germany, and stand-alone polypropylene (PP) sites in Carrington, UK and Tarragona, Spain. The deal is contingent on consultations with local works councils and is expected to close in the first half of 2026. The sites were part of six put under strategic review in May 2024. LyondellBasell's Brindisi PP asset is not part of the deal and its future remains under review. Lyondell Basell confirmed the closure of its Maasvlakte propylene oxide-styrene monomer plant — the final site included in its initial review — in March. The companies said that the package of assets "represent a scaled olefins and polyolefins platform strategically located in proximity to a longstanding customer base and with access and connectivity to key infrastructure". LyondellBasell will contribute €265mn ($303mn) of €275mn total cash funding to support the separated business, but said that the sale would reduce its annual capex by around €110mn, reduce fixed costs by €400mn, and reduce the scope for decarbonisation investments. Decarbonisation of the Berre and Muenchmuenster sites by 42pc of 2020 levels by 2030, as previously committed to by LyondellBasell, would cost hundreds of millions of euros, or more on a faster timescale. Sale of the assets was preferential to closing them, which would incur environmental liabilities, now assumed by Aequita, LyondellBasell said. Aequita is a private equity group focussed on companies in special situations and group carve outs. It has no other chemicals businesses, but other investments include industrial and automotive parts suppliers. Managing partner Christoph Himmel said "Each site brings a strong operational foundation and a highly experienced, committed employee base. We are confident in our ability to accelerate their development". LyondellBasell indicated that it remains committed to Europe, and said the sale will concentrate its European footprint on "economically sustainable sites". Its remaining European assets are centred around two crackers and downstream units in Wesseling, Germany, PP assets in Italy and propylene oxide capacity in France and the Netherlands. Tarragona and Carrington have capacities of 390,000 t/yr and 210,000 t/yr of PP, respectively. Muenchmuenster has capacity of 400,000 t/yr of ethylene, 265,000 t/yr of propylene, 67,000 t/yr of crude C4s and downstream production of 320,000 t/yr of high-density polyethylene (HDPE). Berre has capacity to produce 465,000 t/yr of ethylene, 270,000 t/yr of propylene and 155,000 t/yr of crude C4s. The site at Berre also has downstream capacity for 320,000 t/yr of low-density polyethylene (LDPE), 350,000 t/yr of PP and 80,000 t/yr of butadiene extraction. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Global footwear market to grow in 2025: Industry


05/06/25
News
05/06/25

Global footwear market to grow in 2025: Industry

London, 5 June (Argus) — Global footwear consumption could increase by 7.6pc on the year in 2025, according to a survey by footwear industry association World Footwear, potentially supporting demand for polyurethane (PU) this year. The increase in global footwear consumption could boost demand for key components in the production of PU for the footwear industry, including monomeric MDI (MMDI), aliphatic polyester polyols and polymeric polyester polyols. Consumption will grow by 14.9pc in Africa, by 7.5pc in Asia, by 3.9pc in North America and by 2pc in Europe, according to the survey, but could decline by 0.5pc in South America and by 3.9pc in Oceania. The geographic divergence "highlights the shifting centre of gravity in the global footwear industry toward emerging markets [...] while established markets face greater challenges," World Footwear said. World Footwear also said that supply chain pressures and higher input costs continue to squeeze profit margins. Survey respondents said that the cost of raw materials was the top concern for the industry. By Laura Tovey-Fall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Europe PU flex foam output falls 2.7pc in 2024


04/06/25
News
04/06/25

Europe PU flex foam output falls 2.7pc in 2024

London, 4 June (Argus) — European production of flexible slabstock polyurethane (PU) foam fell by 2.7pc to 893,200t in 2024, a smaller drop than expected, according to data released today by industry association Europur. The decline was less steep than Europur's forecast of a 10pc fall. It also marked a slowdown in the rate of contraction seen in previous years — output dropped by 5pc in 2023 and by more than 10pc in 2022. The sector had expanded sharply in 2021 as Covid-19 lockdowns drove consumer spending on household goods such as mattresses and upholstered furniture, key drivers of PU foam demand. European producers have since faced growing competition from neighbouring regions. Eurasian output surged by 17.9pc to 223,200t in 2024, driven largely by Russia, where production is running "flat out", said Clint Raine, co-founder of consultancy Belvedere and Partner, speaking at Europur's annual conference in Spain today. In contrast, output in Poland — Europe's largest producer — fell by 1.2pc to 203,400t. Turkey, which overtook Poland in 2023 as the biggest producer in the wider Europe, Middle East and Africa (EMEA) region, produced slightly more than Poland again last year, although its output declined by 5pc to 203,900t. There are no clear signs of a recovery in European production in 2025, Raine said, citing stagnant demand and rising costs. Most industry participants share that view. A survey of delegates at the Europur conference showed that 49pc expect European output to fall by up to 5pc this year, while 21pc forecast a drop of more than 5pc. About 23pc expect production to remain stable, and just 7pc anticipate growth in 2024. By Laura Tovey-Fall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Europur flags China PU foam threat, backs probe


04/06/25
News
04/06/25

Europur flags China PU foam threat, backs probe

London, 4 June (Argus) — European polyurethane (PU) foam makers association Europur said today that it would support an antidumping investigation into Chinese imports to Europe, as they threaten producers in the region. Europur's call comes as European PU foam producers are concerned about the impact of rising Chinese imports on their industry's competitiveness. A combination of factors including weaker domestic demand in China and lower freight rates has boosted cheaper Chinese PU imports to Europe in recent months. "We are not against trade […] but trade must be fair," Europur president Bart ten Brink told delegates at the association's annual conference in Spain. "We cannot have a set of rules for all of the European producers and none for [those outside]," he said, adding that Europe is failing to enforce a level playing field. Europur said it has done preparation work to support an antidumping investigation. But major mattress producers would have to press for it at a European level, Brink noted. European Policy Centre Associate Director Georg Riekeles warned delegates against complacency. As European chemical capacity shuts down under pressure from low-cost Chinese competition, the country is strategically well-positioned to fill the supply gap, Riekeles suggested. Europe must strengthen its internal market, he warned. "No amount of subsidies will work, unless you have demand capacity [but] value chain integration in Europe has stalled in the last decade." Chinese PU exports to Europe have risen since the start of this year, driven by weaker domestic demand in China, lower Asia to Europe freight rates and a weaker US dollar, which has made dollar-denominated Chinese volumes more competitive in Europe. Chinese exporters are facing growing challenges in other markets including the US as a result of trade uncertainty and shifting tariff regimes. This has contributed to make stable markets such as Europe more attractive, and trade flows of finished goods — such as mattresses — are shifting from the US to other markets, including Europe. China's April mattress exports were down by 11pc on the year at 2.35mn units. Shipments to the US fell by 45pc to 383,100, while exports towards Europe rose by 27.8pc in April, to 733,000. The drop in mattress shipments from China has contributed to slow Chinese domestic demand for polyether polyols, a key input into PU foam, pushing exports up. China exported 84,800t of polyether polyols to Europe in January-April this year, an increase of 30pc year on year. A further 93,400t were exported towards nearby Turkey in the first four months of the year. Argus assessed flexible slabstock polyether polyols at €1,280-1,370/t del for domestic supply in May. Meanwhile imported polyols from China were at €1,100-1,150/t on a delivered basis in some European markets last month. By Laura Tovey-Fall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more