NorthAm unrecoverable auto count ticks up
The number of vehicles that will not be built in North America because of semiconductor and other material shortages ticked up in the last week.
At least 750,000 fewer vehicles are expected to be built at North American factories in 2021 because of material shortages impacting production, according to estimates by AutoForecast Solutions.
That figure is a rise of 50,000 from the week before and is more than triple the 230,000 vehicles the company estimated would be lost as of mid-April.
North American automakers have suffered from supply shortages since January, when many began reporting that a lack of semiconductors — the chips used in many vehicles and personal electronic devices — was forcing them to curtail production.
A February winter storm in Texas exacerbated the issues by shutting down petrochemical production, leading to further shortages of foam and other products used in vehicles.
Kia reported this week that it would cancel its third shift at its Georgia plant for the week of 14-18 June, while Honda continues to report impacts to its North American plants.
Other automakers have made progress toward recovering some production. General Motors (GM) will increase output of its Chevrolet Silverado and GMC Sierra full-size pickup trucks by 1,000 trucks a month beginning in mid-July. Shipments of the Chevrolet Colorado and GMC Canyon midsize pickup trucks will increase by 30,000 units from mid-May through 5 July as vehicles that had been partially built are fully fitted with semiconductors.
Other US-based GM plants will forgo their traditional summer shutdowns.
Ford has multiple shutdowns scheduled to end on 14 June, and says it has no further updates at this time as to whether those closures will continue or not. Some of those plant idlings include production of its best selling and steel- and aluminum-intensive F-150 full-size pickup truck.
Related news posts
STB chair Oberman to leave rail agency on 10 May
STB chair Oberman to leave rail agency on 10 May
Washington, 26 April (Argus) — US Surface Transportation Board (STB) chairman Martin Oberman (D) said today that he would retire in two weeks, though a replacement has not been named. Oberman informed President Joe Biden of his decision in a letter earlier today. Oberman said in mid-November 2023 that he would exit the agency in early 2024 . His five-year term expired on 31 December but he continued to serve into his one-year holdover term. No additional details have been announced, but vice chairman Karen Hedlund (D) is expected to lead the rail regulator until a formal appointment has been made. Chairman Oberman's "commitment to exploring all sides of an issue was pivotal in helping to find solutions for stakeholders," the Freight Rail Customer Alliance said. National Grain and Feed Association chief executive Mike Seyfert said pointed to Oberman's actions in working toward significant regulatory milestones for agricultural shippers and railroads. Under Oberman's leadership, STB has moved forward on long-standing proposal to allow reciprocal switching. The switching plan would allow a shipper served by a single railroad to request that its freight be transferred to another major railroad at a designated interchange point. STB is expected to act on reciprocal switching as early as this month, after introducing a plan tied to railroad service performance in September 2023. His term was also highlighted by several major industry events, such as the Covid-19 pandemic, the merger of Canadian Pacific and Kansas City Southern and the 2022 rail service crisis. Oberman was nominated by former US president Donald Trump in July 2018. His appointment was confirmed by the US Senate in January 2019 and he was appointed chairman by President Joe Biden in January 2021. By Abby Caplan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Lyondell Houston refinery to run at 95pc in 2Q
Lyondell Houston refinery to run at 95pc in 2Q
Houston, 26 April (Argus) — LyondellBasell plans to run its 264,000 b/d Houston, Texas, refinery at average utilization rates of 95pc in the second quarter and may convert its hydrotreaters to petrochemical production when the plant shuts down in early 2025. The company's sole crude refinery ran at an average 79pc utilization rate in the first quarter due to planned maintenance on a coking unit , the company said in earnings released today . "We are evaluating options for the potential reuse of the hydrotreaters at our Houston refinery to purify recycled and renewable cracker feedstocks," chief executive Peter Vanacker said on a conference call today discussing earnings. Lyondell said last year a conversion would feed the company's two 930,000 metric tonnes (t)/yr steam crackers at its Channelview petrochemicals complex. The company today said it plans to make a final investment decision on the conversion in 2025. Hydrotreater conversions — such as one Chevron completed last year at its 269,000 b/d El Segundo, California, refinery — allow the unit to produce renewable diesel, which creates renewable naphtha as a byproduct. Renewable naphtha can be used as a gasoline blending component, steam cracker feed or feed for hydrogen producing units, according to engineering firm Topsoe. Lyondell last year said the Houston refinery will continue to run until early 2025, delaying a previously announced plan to stop crude processing by the end of 2023. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s JBIC to finance Chilean copper mine development
Japan’s JBIC to finance Chilean copper mine development
Osaka, 26 April (Argus) — Japan is enhancing its financial support for the development of copper mines in Chile, as part of efforts to increase its self-efficiency of base metals. State-owned Japan Bank for International Co-operation (JBIC) on 25 April signed a $248mn loan agreement with Chile-based joint-venture Compania Minera Arqueros (CMAQ) to finance development of its Arqueros copper project in Chile. CMAQ is 80pc owned by Japanese copper producer Nittetsu Mining and 20pc by Chilean firm Fondo de Inversion Privado Talcuna. The load will be co-financed by other Japanese private-sector financial firms, including Sumitomo Mitsui Banking, Mizuho Bank and MUFG Bank. The total co-funding will be $355mn. CMAQ plans to use the funding to develop Arqueros, located 35km northeast of La Serena. The mine is expected to produce 1.8mn t/yr of crude ore and 55,000 t/yr of copper concentrates for 15 years. The company aims to start operations in 2026. Nittetsu is to secure all the output from the project. The latest deal follows last month's loan agreement by JBIC and other financial institutes to provide $2.5bn to develop the Centinela copper mine in Chile . Japan relies on all its copper concentrates demand from imports, which has prompted the government to secure long-term and stable supplies of copper resources. The country's strategic energy plan has a target to achieve at least an 80pc self-sufficiency for base metals, including copper, by 2030. By Motoko Hasegawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s Mol starts operating LPG-fuelled VLGC
Japan’s Mol starts operating LPG-fuelled VLGC
Tokyo, 26 April (Argus) — Japanese shipping firm Mitsui OSK Line's (Mol) Singapore-based subsidiary Aramo Shipping started operating today a new LPG-fuelled LPG and ammonia carrier for domestic importer Gyxis. The 87,119m³ very large gas carrier (VLGC) Aquamarine Progress 2 was built by Japanese shipbuilder Namura Shipbuilding at Namura's Imari shipyard in south Japan's Saga prefecture. The vessel is equipped with a dual-fuel engine, which can burn LPG and conventional marine fuel. Mol expects use of LPG to reduce carbon dioxide (CO2) and nitrogen oxide emissions by 20pc and sulphur oxide and particulate matter emissions by 90pc compared with a heavy oil-dedicated vessel. The VLGC is also designed to be able to carry ammonia, eyeing potential demand growth for decarbonisation. Japanese shipping firms and shipbuilders have boosted construction of LPG carriers that can also ship ammonia, as demand for the cleaner fuel is expected to increase in future. Japan plans to co-fire ammonia at coal-fired power plants to reduce CO2 emissions, while aiming to use ammonia as a hydrogen carrier. Shipbuilders Kawasaki Heavy Industries and Mitsubishi Heavy Industries each delivered a VLGC, which can carry LPG and liquefied ammonia. Mol, in partnership with shipbuilders Tsuneishi Shipbuilding and Mitsui E&S Shipbuilding, completed risk assessments to design a mid-size ammonia-fuelled ammonia and LPG carrier , targeting to finish construction by 2026. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more