Korea to impose anti-dumping duty on Chinese PET resin

: Petrochemicals
24/10/21

The Korea Trade Commission (KTC) has recommended that the Ministry of Economy and Finance (Moef) impose anti-dumping duties on polyethylene terephthalate (PET) resin from China, with an implementation period of five years.

The affected products are classified under South Korea's tariff code 3907.61.0000. KTC recommended a rate ranging from 7-7.98pc, with this decision in line with market expectations. Chinese producer Jiangsu Ceville applied for the exclusion of recycled PET from the scope of the investigation, but the South Korean government ultimately denied this request.

Moef in July announced the decision to impose provisional anti-dumping duties on the affected products for a period of four months, effective until 29 November.

This came after KTC issued a positive preliminary ruling that recommended the imposition of provisional anti-dumping duties on the involved enterprises. KTC had started an anti-dumping investigation into the PET resin produced in China on 12 January.

South Korean company TK Chemical had filed an anti-dumping investigation request with KTC in November 2023, citing losses to the relevant domestic industry because of the dumping of Chinese PET resin.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

25/06/23

Indian quality controls for PVC set for December 2025

Singapore, 23 June (Argus) — The implementation of Bureau of Indian Standards (BIS) quality controls for polyvinyl chloride (PVC) imports into India is now set for to 24 December 2025, extended from 24 June 2025. The extension was announced late on 20 June in the Gazette of India , signalling a third extension in the implementation of BIS quality controls on PVC imports. An initial implementation date of 26 August 2024 was set by India's Department of Chemicals and Petrochemicals (DCP), followed by an extension to 24 December 2024 and a second extension to 24 June 2025 . Some progress is noticeable, but is it enough? There are 30 PVC homopolymer production units outside of India that are currently listed as BIS certified as of 23 June. This includes key production units in Japan, South Korea, Taiwan, Thailand, Indonesia, Vietnam and Malaysia, which accounted for around 44pc of total imports into India in 2024, according to latest data from Global Trade Tracker (GTT). Some units in the US, Germany, France, Egypt, Colombia and Mexico are also included in the list, but other US and European production units are either still waiting for BIS audits to be conducted at their plants or are waiting to hear back from BIS agents after submitting their applications for audit. This is a significant improvement since the previous implementation date of 24 December 2024, when a total of 14 PVC homopolymer production units were BIS certified, predominantly in Japan, Taiwan and South Korea. Chinese PVC producers, which accounted for around 40pc of total imports into India in 2024, have also yet to receive BIS certification to supply PVC into India. India needs to import a significant share of its PVC supply before the start of new domestic capacities from 2026 onwards and an extension to the implementation of BIS quality controls is likely because some key exporters are still waiting to receive BIS certification, market participants said. Suspension PVC (s-PVC) import prices into India were assessed at $680-720/t cfr India on 20 June 2025, while paste PVC (e-PVC) import prices were assessed at $940-1,020/t cfr India. By Michael Vitiello India's PVC imports '000t Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Versalis completes pyrolysis production tests at Mantua

25/06/19

Versalis completes pyrolysis production tests at Mantua

London, 19 June (Argus) — Italian chemical company Versalis has completed initial production tests at its 6,000 t/yr input capacity chemical recycling site in Mantua. The company reaffirmed plans to expand the technology at a site in Priolo, Sicily which will have an input capacity of 40,000 t/yr. The company, a subsidiary of integrated oil company Eni, is producing new plastic materials via a "high thermal performance pyrolysis reactor" as part of its "Hoop" brand. The new plastic materials will be suitable for food packaging and pharmaceuticals. The Mantua plant began construction in October 2023. The new site in Priolo was planned as part of the Eni-Versalis "chemical transformation plan" that was signed in March 2024 with the enterprise ministry, although an input capacity was not given at the time. Eni announced plans to phase out Italian steam crackers in October 2024 , choosing to focus "on a high-value downstream portfolio comprising compounding and specialised polymers, biochemistry and products from the circular economy". By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Pryme restarts Rotterdam PPO plant

25/06/19

Pryme restarts Rotterdam PPO plant

London, 19 June (Argus) — Dutch plastic-derived pyrolysis oil (PPO) producer Pryme has restarted output at its Rotterdam site, and by this morning had produced 25t of PPO since 18:00 local time on 18 June. The output marks a successful restart since the operation, Pryme One, shut down on 29 April because of a leaky discharge valve. The Pryme One site has an input capacity of 26,000 t/yr. Pryme reduced its second quarter production guidance to "up to 250t" from "750-1,250t" following the shutdown. Pryme previously limited operations at the site in March, after vibrations caused a shutdown. In its 2024 annual report the company said that it had originally aimed for production goals of a little below 7,000t of PPO for 2025. Since the leak on 29 April the firm guided production of 1,500-2,000t for the third quarter and 3,000-4,000t for the fourth quarter in its first-quarter results, published on 6 May, adding that "production is expected toward the lower end of each range unless further improvements are realised". By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

UK firm wins grant to develop bio-based UPR

25/06/18

UK firm wins grant to develop bio-based UPR

London, 18 June (Argus) — UK-based chemical distributor Bowden Chemicals has been awarded a government grant to develop unsaturated polyester resins (UPR) made from bio-based materials. The company, which supplies raw materials for the polyester resin and phenolic resin industries, aims to develop a UPR over the next 18 months that matches the performance of fossil-based resins while containing more than 50pc renewable content. UPRs are hard, thermosetting resins used in the construction sector. The grant was awarded through the UK government's "Smart Grant" scheme, administered by innovation agency Innovate UK. The amount of funding has not been disclosed. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Keyera acquiring Plains' Canada NGL assets for $3.75bn

25/06/17

Keyera acquiring Plains' Canada NGL assets for $3.75bn

Houston, 17 June (Argus) — Midstream operator Keyera will acquire Plains All American's Canadian natural gas liquids (NGLs) business for C$5.15bn ($3.75bn). The transaction, which is expected to close by the first quarter of 2026, includes 193,000 b/d of fractionation capacity in western Canada, more than 1,500 miles of pipelines gathering 575,000 b/d of NGLs, 23mn bl in NGL storage capacity, and the 5.7 Bcf/d Empress straddle gas processing plant. The acquisition is expected to deliver C$100mn of annual synergies between the assets in the first year, according to Keyera. Plains said the divestiture will allow the US-based midstream operator to focus on its crude handling assets in both the US and Canada. Plains will keep nearly all of its NGL assets in the US. The acquisition of Plains' assets gives Keyera NGL fractionators and gas processing plants in Fort Saskatchewan, and at the Empress facility in western Canada as well as storage at Sarnia, Ontario. It also links Keyera's existing assets to takeaway agreements for LPG exports out of British Columbia. Keyera chief executive Dean Setoguchi said the acquisition "... brings key infrastructure under Canadian ownership, keeping value and decision-making closer to home." Plain's Canadian business is underpinned by fee-based contracts with an average remaining life of 10 years, Keyera said. Associated NGL production in Canada is expected to grow by 500,000 b/d by 2040, according to Keyera, as natural gas production in western Canada climbs by 6 Bcf/d during the same timeframe. By Amy Strahan Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more