Rio eyes biomass for steel, unlike Australian rivals

  • : Biofuels, Coal, Coking coal, Emissions, Hydrogen, Metals
  • 22/11/23

UK-Australian iron ore producer Rio Tinto pushes biomass in making green steel, as Australia's three biggest iron ore exporters explore three different methods of reducing emissions in steelmaking.

Rio Tinto has developed the BioIron process in Germany and will build a 1 t/hour pilot plant to test its capacity to economically produce metallic iron from the firm's Pilbara iron ore. The process mixes biomass with Pilbara iron ore to act as a reductant and harnesses microwave energy — potentially from renewable sources — to power the conversion to metallic iron.

"BioIron is just one of the pathways we are developing in our decarbonisation work with our customers, universities and industry to reduce carbon emissions right across the steel value chain," Rio Tinto chief commercial officer Alf Barrios said.

Rio Tinto's two biggest Pilbara iron ore rivals each have their own preferences of cutting emissions in steelmaking. Australian firm BHP — the only one of these three to own large-scale coking coal production assets — is focused on cutting emissions from traditional blast furnace steel production. Fortescue Metals plans to use new technology to produce steel using iron ore and green hydrogen.

Fortescue Future Industries (FFI), which is the decarbonisation arm of Fortescue, announced last week that it had agreed to work with Indonesian steelmaker PT Gunung Raja Paksi to investigate how FFI's green hydrogen and green ammonia could be used to decarbonise the production of direct reduced iron and hot briquetted iron. Fortescue has previously pushed its building capacity to produce metallic iron in the Pilbara region by using new technology and green hydrogen to convert either magnetite concentrate from its Iron Bridge project or lowergrade direct shipping ore.

BHP is investing in its Queensland coal assets because it expects that the biomass and hydrogen-based green coal solutions envisaged by Rio Tinto and Fortescue are still decades away. The Queensland treasury last week released data showing that under the International Energy Agency's (IEA) Advanced Pledges Scenario, it expects Australian metallurgical coal exports will remain steady at around 190mn t/yr until 2030.

"Under the long-term scenarios outlined in the IEA's 2022 World Energy Outlook, it is still expected that international demand should continue to support Queensland's coal exports over coming decades, in particular for the state's metallurgical coal producers," the Queensland treasury's coal report concluded.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/04/26

Etanol hidratado impulsiona início da safra 2024-25

Etanol hidratado impulsiona início da safra 2024-25

Sao Paulo, 26 April (Argus) — A produção de etanol no Centro-Sul aumentou 7,2pc na primeira quinzena de abril em relação ao ano passado, com produtores ainda favorecendo o hidratado em meio à demanda crescente. As usinas da região entregaram 841.000m³ ao mercado na primeira quinzena da safra de 2024-25, em comparação com 784.000m³ no mesmo período do ano anterior, segundo os dados mais recentes da União da Indústria de Cana-de-Açúcar e Bioenergia (Unica). A produção de etanol hidratado subiu 39pc e impulsionou a alta anual, totalizando 693.000m³. Já o processamento de anidro, utilizado como mistura na gasolina, caiu 48pc, para 174.000m³. As usinas permanecem destinando mais matéria-prima para o E100, em um cenário de paridade favorável para o biocombustível frente à gasolina na bomba. O hidratado está mais vantajoso para os motoristas em 80pc do mercado de combustíveis leves, disse a Unica. As plantas do Centro-Sul venderam 1,3 milhão de m³ de etanol para o mercado doméstico em abril, salto de 41pc na variação anual. As vendas de hidratado representaram 902.355m³ deste total, alta de 61pc, enquanto as de anidro subiram 14pc, para 448.431m³. Já as exportações totalizaram 52.104m³, queda de 6,2pc. O mix de produção na quinzena foi de 56,4pc para o etanol e 43,6pc para o açúcar, em comparação com 62pc para o biocombustível no mesmo intervalo em 2023. No período, a moagem de cana-de-açúcar avançou 14pc, para 15,8 milhões de t, à medida que a temporada inicia suas operações. Até 16 de abril, 171 usinas estavam operando no ciclo de 2024-25, número maior do que as 166 no mesmo intervalo do ano anterior. A Unica espera que mais 54 unidades recomecem as atividades durante a segunda metade do mês. O etanol à base de milho representou 32pc do volume total produzido na primeira parte de abril, somando 270.500m³, crescimento de 12pc na comparação anual. Por Laura Guedes Envie comentários e solicite mais informações em feedback@argusmedia.com Copyright © 2024. Argus Media group . Todos os direitos reservados.

Lyondell Houston refinery to run at 95pc in 2Q


24/04/26
24/04/26

Lyondell Houston refinery to run at 95pc in 2Q

Houston, 26 April (Argus) — LyondellBasell plans to run its 264,000 b/d Houston, Texas, refinery at average utilization rates of 95pc in the second quarter and may convert its hydrotreaters to petrochemical production when the plant shuts down in early 2025. The company's sole crude refinery ran at an average 79pc utilization rate in the first quarter due to planned maintenance on a coking unit , the company said in earnings released today . "We are evaluating options for the potential reuse of the hydrotreaters at our Houston refinery to purify recycled and renewable cracker feedstocks," chief executive Peter Vanacker said on a conference call today discussing earnings. Lyondell said last year a conversion would feed the company's two 930,000 metric tonnes (t)/yr steam crackers at its Channelview petrochemicals complex. The company today said it plans to make a final investment decision on the conversion in 2025. Hydrotreater conversions — such as one Chevron completed last year at its 269,000 b/d El Segundo, California, refinery — allow the unit to produce renewable diesel, which creates renewable naphtha as a byproduct. Renewable naphtha can be used as a gasoline blending component, steam cracker feed or feed for hydrogen producing units, according to engineering firm Topsoe. Lyondell last year said the Houston refinery will continue to run until early 2025, delaying a previously announced plan to stop crude processing by the end of 2023. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

EU adopts Net-Zero Industry Act


24/04/26
24/04/26

EU adopts Net-Zero Industry Act

London, 26 April (Argus) — Members of the European Parliament (MEPs) have adopted Net-Zero Industry Act, which plans to allocate funds towards the production of net-zero technologies. The act provides a pathway to scale up development and production of technologies that are critical towards meeting the EU's recommendation of net-zero greenhouse gas (GHG) emissions by 2050. This would include solar panels, electrolysers and fuel cells, batteries, heat pumps, onshore and offshore wind turbines, grid technologies, sustainable biomethane, as well as carbon capture and storage (CCS). The act is designed to help simplify the regulatory framework for the manufacture of these technologies in order to incentivise European production and supply. It also sets a target of 40pc production within the EU for its annual "deployment needs" of these technologies by 2030. Time limits will be instated on permit grants for manufacturing projects, at 12 months if the manufacturing capacity is under 1 GW/yr and 18 months for those above that. It will introduce time limits of nine months for "net-zero strategic projects" of less than 1 GW/yr and 12 months for those above. This is further complemented by the introduction of net-zero strategic projects for CO2 storage, to help support the development of CCS technology. The act was met with positive reactions from the European Community Shipowners' Association (ECSA), which said the bill will set the benchmark for member states to match 40pc of the deployment needs for clean fuels for shipping with production capacity. ECSA said the Net-Zero Industry Act will be instrumental in supporting the shipping industry to meet targets set under FuelEU Maritime regulations , which are set to come into effect next year. By Hussein Al-Khalisy Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

New technologies aim to boost SAF production


24/04/26
24/04/26

New technologies aim to boost SAF production

London, 26 April (Argus) — A likely rise in global demand for sustainable aviation fuel (SAF), underpinned by mandates for its use, is encouraging development of new production pathways. While hydrotreated esters and fatty acids synthesised paraffinic kerosine (HEFA-SPK) remains the most common type of SAF available today, much more production will be needed. The International Air Transport Association (Iata) estimated SAF output at around 500,000t in 2023, and expects this to rise to 1.5mn t this year, but that only meets around 0.5pc of global jet fuel demand. An EU-wide SAF mandate will come into effect in 2025 that will set a minimum target of 2pc, with a sub-target for synthetic SAF starting from 2030. This week the UK published its domestic SAF mandate , also targeting a 2pc SAF share in 2025 and introducing a power-to-liquid (PtL) obligation from 2028. New pathways involve different technology to unlock use of a wider feedstock base. US engineering company Honeywell said this week its hydrocracking technology, Fischer-Tropsch (FT) Unicracking, can be used to produce SAF from biomass such as crop residue or wood and food waste. Renewable fuels producer DG Fuels will use the technology for its SAF facility in Louisiana, US. The plant will be able to produce 13,000 b/d of SAF starting from 2028, Honeywell said. The company said its SAF technologies — which include ethanol-to-jet , which converts cellulosic ethanol into SAF — have been adopted at more than 50 sites worldwide including Brazil and China. Honeywell is part of the Google and Boeing-backed United Airlines Ventures Sustainable Flight Fund , which is aimed at scaling up SAF production. German alternative fuels company Ineratec said this week it will use South African integrated energy firm Sasol's FT catalysts for SAF production. The catalysts will be used in Ineratec's plants, including a PtL facility it is building in Frankfurt, Germany. The plant will be able to produce e-fuels from green hydrogen and CO2, with a capacity of 2,500 t/yr of e-fuels beginning in 2024. The e-fuels will then be processed into synthetic SAF. Earlier this month , ethanol-to-jet producer LanzaJet said it has received funding from technology giant Microsoft's Climate Innovation Fund, "to continue building its capability and capacity to deploy its sustainable fuels process technology globally". The producer recently signed a licence and engineering agreement with sustainable fuels company Jet Zero Australia to progress development of an SAF plant in north Queensland, Australia. The plant will have capacity of 102mn l/yr of SAF. Polish oil firm Orlen formed a partnership with Japanese electrical engineering company Yakogawa to develop SAF technology . They aim to develop a technological process to synthesise CO2 and hydrogen to form PtL SAF. The SAF will be produced from renewable hydrogen as defined by the recast EU Renewable Energy Directive (RED II) and bio-CO2 from biomass boilers, Orlen told Argus . By Evelina Lungu Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s JBIC to finance Chilean copper mine development


24/04/26
24/04/26

Japan’s JBIC to finance Chilean copper mine development

Osaka, 26 April (Argus) — Japan is enhancing its financial support for the development of copper mines in Chile, as part of efforts to increase its self-efficiency of base metals. State-owned Japan Bank for International Co-operation (JBIC) on 25 April signed a $248mn loan agreement with Chile-based joint-venture Compania Minera Arqueros (CMAQ) to finance development of its Arqueros copper project in Chile. CMAQ is 80pc owned by Japanese copper producer Nittetsu Mining and 20pc by Chilean firm Fondo de Inversion Privado Talcuna. The load will be co-financed by other Japanese private-sector financial firms, including Sumitomo Mitsui Banking, Mizuho Bank and MUFG Bank. The total co-funding will be $355mn. CMAQ plans to use the funding to develop Arqueros, located 35km northeast of La Serena. The mine is expected to produce 1.8mn t/yr of crude ore and 55,000 t/yr of copper concentrates for 15 years. The company aims to start operations in 2026. Nittetsu is to secure all the output from the project. The latest deal follows last month's loan agreement by JBIC and other financial institutes to provide $2.5bn to develop the Centinela copper mine in Chile . Japan relies on all its copper concentrates demand from imports, which has prompted the government to secure long-term and stable supplies of copper resources. The country's strategic energy plan has a target to achieve at least an 80pc self-sufficiency for base metals, including copper, by 2030. By Motoko Hasegawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more