Sharp fall in Indian auto sales to hit steel demand
The abrupt decline in India's automobile sales in March and April as a result of the Covid-19 pandemic and resulting nationwide lockdown is expected to leave a significant dent in the country's steel demand.
The automobile sector contributes to 10-12pc of India's total steel demand. In the year ending March, automobile output fell by 14.73pc on the year to 26.3mn vehicles. This includes more than 34mn passenger vehicles and 752,022 commercial vehicles. The remainder was divided between two-wheelers, three-wheelers and quadricycles. Total auto sales in the same period dropped by 18pc on the year to more than 23.54mn units.
In March, India's automobile sales fell to its lowest on record as a result of Covid-19 and the lockdown, declining by 33.6pc on the year to 1.44mn vehicles. Passenger vehicle sales fell by 51pc year on year to 143,014 units and commercial vehicles by 88pc year on year to 13,027 units.
Automotive steel demand is expected to remain muted for the year ending March 2021 because of low income levels and consumer sentiment following on from the coronavirus.
India's major automobile producers — which include Tata Motors, Maruti Suzuki, Mahindra, Hyundai, India and Nissan India — recorded zero domestic sales in April. Production at these automakers came to a standstill in April following the announcement of a nationwide lockdown on 25 March.
Certain manufacturing facilities that are located in areas demarcated as orange and green zones with low numbers of Covid-19 cases were able to restart operations in the first week of May. But auto sales in May are likely to be muted as services provided by the entire supply chain — which include raw material providers, transport providers, vendors, dealers, and financiers — remain limited.
"We have restarted operations mainly for tractor wheels, as demand for tractors by farmers usually peaks before monsoon [June-October]," said Sanjeev Raghuvanshi, executive director of Steel Strips & Wheels. But automotive demand has yet to pick up, he said.
The auto component industry is likely to witness a double-digit decline in the 2020-21 fiscal year on account of disrupted operations due to the pandemic and lockdown, according to a forecast by Mumbai-based ratings agency India Ratings and Research. Lower income levels, weak consumer sentiment, production disruptions, decreased industrial output and reduced vehicular movement will lead to the decline in auto demand, the agency said.
Automakers are also likely to postpone new model launches and investment plans due to the country's worsening liquidity crisis. This is likely to result in the deferment of orders for automotive steel.
Global industry research agency Crisil estimates that auto component production revenue growth will decline by 15-17pc during the financial year. In addition to dampened consumer sentiment and production cuts, lower freight demand will the limit the movement of trucks, weighing on commercial vehicle demand. Automobile demand is likely to pick up only in the second half of the 2021-22 fiscal year, Crisil said.
"We have to prepare ourselves for a prolonged slowdown in the market in the 2020-21 fiscal year," said Soumitra Bhattacharya, managing director at automotive technology supplier Bosch. India's automobile demand may contract by up to 30pc, it said.
Related news posts
Milei's bid to open Argentina's economy passes
Milei's bid to open Argentina's economy passes
Montevideo, 30 April (Argus) — Argentina's congress today approved the government's sweeping economic legislation that could open the door to more private-sector investment in energy and commodities. The bill passed on a 142-106 vote, with five abstentions, after a marathon 20-hour debate. Changes include privatizing some state-owned companies, controversial labor reforms and measures to promote LNG development. The omnibus legislation, which includes 279 articles, is an important victory for President Javier Milei's administration and will change the way many sectors, including energy, operate in the country. Lawmakers aligned with Milei's Liberty Advances party swiftly moved to the second stage of the process, which requires approval of individual articles. The omnibus bill was initially approved in February, but the administration withdrew it after congress failed to approve several key individual articles. That original version included 664 articles. Several of the more controversial articles were brought up immediately after the blanket approval and easily passed. They included an article allowing for privatization of state-run enterprises — national power company Enarsa is on the list — and another delegating to the administration the power to eliminate state agencies without having to consult with congress. Also approved was the article on labor reform. The country's oilseed industry and port workers' unions called a strike the previous day to pressure congress to modify the labor reform. That did not happen. It passed in a separate 136-113 vote. The strike started to fizzle with approval of the legislation. Approval of the package includes several articles the administration says will open the door to major investments in the energy sector. Chapter II specifically covers natural gas, and introduces new regulations for LNG. The chapter includes five articles that allow for 30-year contracts for LNG export projects and guarantees that gas supply cannot be interrupted for any reason. The energy secretariat has six months to design the implementing rules for LNG. The government wants to speed up monetization of the Vaca Muerta unconventional play, which has an estimated 308 trillion cf of natural gas reserves. It is pushing for Malaysia's Petronas to fully commit to a large-scale LNG facility that would start with a $10bn investment. Chapter IX of the legislation creates a new framework, known as the Rigi, for investments above $200mn. It offers tax, fiscal and customs benefits. Companies have two years from implementation of the legislation to take advantage of the Rigi. The chapter on this framework is one of the most complex in the bill, including 56 articles. It includes specific references to energy projects, from power generation to unconventional oil and gas development. The administration claims the legislation will help tame inflation and stabilize the economy. Inflation was 276pc annualized through February, but is declining, and Milei announced that monthly inflation would be in single digits when the March numbers are announced. The country recorded a 0.2pc quarterly fiscal surplus in the first quarter of this year, something not achieved since 2008. By Lucien Chauvin Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher C919 adoption to boost China's Ti demand
Higher C919 adoption to boost China's Ti demand
Beijing, 30 April (Argus) — Higher adoption of the C919 airliner, China's first self-developed single-aisle passenger jet, is likely to boost demand for titanium mill products in the coming years, according to market participants. China Southern Airlines, one of the country's top three airlines, ordered 100 C919 aircraft from its manufacturer Commercial Aircraft Corporation of China (Comac) yesterday. These aircraft will be delivered in 2024-2031. China's flag carrier Air China on 26 April also announced that it will purchase 100 C919 aircraft from Comac during the same period. Another major airline, China Eastern Airlines, in September 2023 placed an order for 100 C919 aircraft from Comac, which delivered the fifth unit this March. This means all three top China airlines have invested in 100 aircraft deals for C919. Market participants estimate a single C919 aircraft contains 3.92t of titanium mill products. Demand for titanium mill products from a single C919 aircraft will reach 49t based on an overall yield rate of 8pc for mill products used in aviation parts. Titanium mill products typically include titanium strip, rod, section bar, wire, plate, sheet, tap and foil. Comac launched the C919 development programme in 2008 and began prototype production in 2011. The airliner had its maiden flight in 2017 and received its airworthiness certification from Chinese authorities in September 2022. A continued increase in orders and deliveries of the C919 airliner is likely to continue to boost demand for titanium mill products in the coming years. Comac has received over 1,400 orders for C919 from domestic and international airlines so far. China's 32 major manufacturers produced 159,000t of titanium mill products in 2023, up by 5.3pc from 151,000t in 2022, according to statistics from China nonferrous metals industry association titanium zirconium and hafnium branch (CNIA-TI). Aerospace, the second-largest consumption industry for titanium mill products, consumed 29,377t of titanium mill products in 2023, accounting for 19.8pc of China's total domestic production. "Demand from the aerospace industry has large potential in China," a source at a Baoji-based mill products manufacturer told Argus . "Only 20pc of titanium mill products is used in China's aerospace industry now, while the proportion is as high as 70-80pc in Europe and the US." A number of titanium mill products manufacturers in Baoji, which is known as China's "titanium valley", have begun to supply Comac as they have improved their product quality to meet Comac's criterion. Comac designated the country's largest producer Baoji Titanium (BaoTi) as the sole supplier of titanium mill products for the airliner just last year. Argus -assessed prices for titanium ingot, the main feedstock in the production of mill products, held stable from 23 April at 60,000-62,000 yuan/t ex-works for TA2 grade today, in response to firm titanium sponge feedstock costs and steady demand from mill products manufacturers. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Taiwan's scrap imports fall in March as demand slows
Taiwan's scrap imports fall in March as demand slows
Singapore, 30 April (Argus) — Taiwan's ferrous scrap imports fell on a year-on-year basis in March, as a slight rise in spot prices in January combined with slow domestic steel demand to discourage purchases. Taiwanese steel demand has weakened since the beginning of the year, market participants said. "Market fundamentals in 2023 were still okay, but slowed down in January as scrap buyers were unsure about the market post-Chinese new year," a trader said. Marginally higher spot scrap prices in January also suppressed buying appetite. The spot price for HMS 1/2 80:20 containerised scrap from the US west coast was as high as $380t/t on 17 January and was assessed at $375/t cfr by the end of that month. The higher spot prices encouraged steel mills and scrap buyers to take a wait-and-see approach. Loadings and delivery of containerised scrap bookings are usually made 8-10 weeks after an agreement is signed. Import volumes for the second quarter of 2024 are expected at steady-to-lower levels on seasonal weakness, market participants said. Production is likely to fall in the upcoming summer season because of electricity restrictions set by local authorities. A rise in electricity rates in April will also cap any upside in imported scrap prices and volumes, as mills are likely to reduce output by 20-40pc to curb their electricity use. Taiwan ferrous scrap imports t Country Mar % ± vs Feb % ± vs Mar'23 Jan-Mar % ± y-o-y US 121,298 49.29% 12.2% 323,030 5.74% Japan 44,316 -20.17% -56.7% 161,710 -23.04% Australia 15,942 60.69% -58.8% 37,850 -45.67% Dominican Republic 14,920 -15.05% 0.4% 48,878 -0.81% Others 76,671 40.31% 29.1% 198,780 25.86% Total 273,148 24.79% -15.6% 770,249 -2.81% Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan's ferrous scrap exports slip in March
Japan's ferrous scrap exports slip in March
Shanghai, 29 April (Argus) — Japan's ferrous scrap exports declined sharply in March as import demand from Vietnam diminished, while the South Korean market remained bearish. Total exports in March retreated by 17pc on the month and by 10pc from the previous year, reaching 516,000t, according to Japan's customs data. Total exports dropped by 4.6pc on the year to 1.6mn t in the first quarter. Japanese scrap exporters encountered challenges because of declining overseas demand since March, as buyers became more cautious in the face of weaker-than-expected downstream demand recovery. Scrap exports will likely remain subdued in the coming months, according to trade sources. Vietnamese buyers were active in the seaborne market at the beginning of the year, but rising inventory levels and uncertainties in the steel sector outlook led them to step back after February. Exports to Vietnam in March dropped by 21pc on the month. The South Korean market is not expected to rise significantly in the near term as domestic scrap prices continued to fall, dropping by $50-60/t over the past three months. "South Korean buyers only fulfilled long-term contracts and stayed away from the spot market," a Japanese trader said. Exports to South Korea plummeted by 38pc to 470,000t in the first quarter. Exports to Taiwan dropped significantly by 41pc from the previous month as buyers were more focused on purchases of containerised scrap. Exports to Malaysia remained steady above 30,000t in March, while exports to the Philippines decreased from 34,000t in February to 13,000t. But a depreciation of the Japanese yen allowed exporters to offer relatively more competitive prices compared to other suppliers, with buyers price sensitive given a sluggish steel market. The yen started to weaken in March, reaching above ¥155:$1 at the end of April from $146.8:$1 in mid-March. Japan ferrous scrap exports (t) Country March % ± vs Feb % ± vs Mar '23 Jan-Mar % ± on year Vietnam 210,014 -20.7 20.7 683,821 48.0 South Korea 156,851 -9.8 -32.2 469,644 -38.1 Bangladesh 43,755 13.8 N/A 91,205 79.0 Taiwan 35,329 -40.8 -62.8 140,755 -28.8 Others 70,023 -20.6 -7.2 213,587 3.0 Total 515,971 -17.4 -10.4 1,599,011 -4.6 Source: Japan customs Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more