South Korea scrap imports fall on weaker steel demand

  • : Metals
  • 20/09/21

South Korean ferrous scrap imports fell in August as Covid-19 continued to disrupt domestic and export steel business, which consequently limited steelmakers' scrap demand.

The country's scrap imports totalled 284,118t, down by 8.5pc on the month from 310,649t in July. This marked the lowest single-month ferrous scrap import volume for South Korea since December 2008.

Domestic demand for steel and scrap was limited by the slowness of South Korea's "real economy". Housing investment fell as the economy was disrupted by the pandemic while infrastructure projects stalled as the country failed to attract much overseas investment.

Low interest rates prompted capital to flow into equity markets and land acquisitions on speculation of a quick profit if the pandemic ends swiftly, which further limited resources available to steel-consuming sectors.

South Korean finished steel exports were significantly lower in August as demand from overseas buyers fell. Mills cut production to reduce operating costs amid falling steel demand. Mills also raised domestic scrap requirement but lowered scrap collection prices.

Shipments from Japan, the largest ferrous scrap supplier to South Korea in August, fell by 21.1pc on the month to 157,946t from 200,180t in July. Most of the August arrivals were booked in late June-mid-July as prices fell in this period. Mills found Japanese scrap prices too high to consider in mid-end June and made few purchases at that time.

Ferrous scrap imports from Japan totalled 1.98mn t in January-August, down by 28.4pc on the year.

South Korean ferrous scrap imports from the US more than trebled on the month to 47,518t in August. But imports in the first eight months of 2020 halved year-on-year to 404,770t.

South Korean mills that did not collect sufficient scrap in the domestic market in August purchased scrap from the US and other origins when Japanese scrap prices rose too high.

Shipments from Russia increased by 19.7pc on the month to 58,729t in August. Mills considered Russian prices more workable in this shipping cycle and Russian suppliers were able to supply significant volume to South Korea. But imports from Russia in January-August fell by around a quarter to 394,494t from 521,894t in the same period last year.

Scrap imports from Australia fell to just 620t in August, down from 32,268t in July, because south Asian and Indonesian buyers bid higher prices and were more attractive destinations for Australian sellers. Buyers in these regions continued to register strong scrap demand and found Australian scrap prices more competitive than Japanese scrap.

South Korea imported 19,305t of scrap from other origins, up by 7.8pc on the month. But the January-August imports from other origins more than halved on the year to 181,023t from 410,818t in the same period in 2019.

South Korean domestic scrap suppliers were reluctant to send scrap to mills in July-August as mills lowered collection prices further. Mills' inventory level consequently fell and they were driven to seek more scrap on the seaborne market, which will be likely to drive up South Korea ferrous scrap imports over the next two months.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/05/03

Brazil's Gerdau eyes special steel mill in Mexico

Brazil's Gerdau eyes special steel mill in Mexico

Sao Paulo, 3 May (Argus) — Brazilian steelmaker Gerdau is considering building another steel plant in Mexico as it seeks to expand its footprint in the country. The company started a feasibility study for the construction of a special steel unit that would have a production capacity of up to 600,000 metric tonnes (t)/yr, chief executive Gustavo Werneck said today. The move follows an optimistic outlook for the country's automotive industry and increased nearshoring — where companies move production closer to the US to tackle supply chain snarls seen during the pandemic. "Important players in the automotive industry, including current Gerdau customers, are expanding their operations to Mexico, which is becoming one of the most relevant countries in the production of automotive parts," Werneck said on a LinkedIn post. He did not give financial details. Gerdau's first quarter crude steel production in North America fell by 2.8pc , but it posted 3.3pc output growth in its special steel business — which includes operations in Brazil and US — mainly driven by automobile production in Brazil, it said. Mexico's auto sales to the US were 0.9pc higher year-on-year in March and first quarter auto exports rose by 1.9pc from the same period of 2023. Gerdau operates two mills in Mexico with a combined nameplate capacity of 1.5mn t/yr. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US job growth nearly halved in April: Update


24/05/03
24/05/03

US job growth nearly halved in April: Update

Adds services PMI in first, fifth paragraphs, factory PMI reference in sixth paragraph. Houston, 3 May (Argus) — The US added fewer jobs in April as the unemployment rate ticked up and average earnings growth slowed, signs of gradually weakening labor market conditions. A separate survey showed the services sector contracted last month. The US added 175,000 jobs in April, the Labor Department reported today, fewer than the 238,000 analysts anticipated. That compared with an upwardly revised 315,000 jobs in March and a downwardly revised 236,000 jobs in February. The unemployment rate ticked up to 3.9pc from 3.8pc. The unemployment rate has ranged from 3.7-3.9pc since August 2023, near the five-decade low of 3.4pc. The latest employment report comes after the Federal Reserve on Wednesday held its target lending rate unchanged for a sixth time and signaled it would be slower in cutting rates from two-decade highs as the labor market has remained "strong" and inflation, even while easing, is "still too high". US stocks opened more than 1pc higher today after the jobs report and the yield on the 10-year Treasury note fell to 4.47pc. Futures markets showed odds of a September rate cut rose by about 10 percentage points to about 70pc after the report. Services weakness Another report today showed the biggest segment of the economy contracted last month. The Institute for Supply Management's (ISM) services purchasing managers index (PMI) fell to 49.4 in April from 51.4 in March, ending 15 months of expansion. The services PMI employment index fell to 45.9, the fourth contraction in five months, in today's report. Readings below 50 signal contraction. On 1 May, ISM reported that the manufacturing PMI fell to 49.2 in April, after one month of growth following 16 months of contraction. In today's employment report from the Labor Department, average hourly earnings grew by 3.9pc over the 12 month period, down from 4.1pc in the period ended in March. Job gains in the 12 months through March averaged 242,000. Gains, including revisions, averaged 276,000 in the prior three-month period. Job gains occurred in health care, social services and transportation and warehousing. Health care added 56,000 jobs, in line with the gains over the prior 12 months. Transportation and warehousing added 22,000, also near the 12-month average. Retail trade added 20,000. Construction added 9,000 following 40,000 in March. Government added 8,000, slowing from an average of 55,000 in the prior 12 months. Manufacturing added 9,000 jobs after posting 4,000 jobs the prior month. Mining and logging lost 3,000 jobs. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US met coal suppliers expect belated supply tensions


24/05/03
24/05/03

US met coal suppliers expect belated supply tensions

London, 3 May (Argus) — US coking coal prices have so far brushed off any impact of the collapse of the Francis Scott Key bridge in Baltimore on 26 March and the subsequent disruption of vessel traffic via the Port of Baltimore. Suppliers such as Arch Resources and Blackhawk that utilise the Baltimore shipping route have sought effective alternative arrangements so far and buyers have been largely comfortable despite some delays in laycans. Other suppliers such as Northern Appalachia's largest producer, Consol Energy's Bailey mine , which is a key supplier to Atlantic end-users, have faced more challenges, market participants suggest. The decline in fob Australia coal prices from last year's highs amid improved supply availability has also weighed on prices. The Argus assessed premium low-volatile coking coal fob Australia price was at $242.80/t on 3 May, largely unchanged from $254/t on 26 March after reaching a low of $224/t on 8 April. The US east coast prices have followed a similar trajectory, with low-volatile fob US east coast at $215/t today down from $220/t on 26 March after falling to a low in April. Low European demand has been one of the reasons behind the tepid response to coking coal shipment delays from the US. But with expectations of at least some recovery in the second half of 2024 and still no firm date on when the Baltimore traffic will return to normal, some US suppliers suggest coking coal prices may face some upward pressure later this year. Luxembourg-based steelmaker ArcelorMittal has kept its apparent steel demand outlook in Europe unchanged for 2024, expecting a growth of 2-4pc on the year . European steel association Eurofer downgraded its apparent steel consumption outlook for 2024 again , to 3.2pc from a previous forecast of 5.6pc, owing to worsening geopolitical tensions, economic uncertainty, energy prices, inflation and higher interest rates. But this would still be an improvement from a 9pc fall in steel consumption in 2023. There is also optimism among US coal suppliers that Brazil may be a source of renewed demand in the coming months with domestic steel production expected to improve. The Brazilian government is due to increase taxes for some imported steel products after facing pressure from the domestic steel industry to apply tariffs on imports, in particular on Chinese steel. Taxes will be increased to 25pc on 11 steel products — mainly flat rolled — contingent on such import levels exceeding prescribed quotas, the trade ministry's committee on foreign commerce, Gecex/Camex, said. Brazil's crude steel output reached 31.9mn t in 2023, down by 6.5pc on the year, World Steel Association data show. In the US, the fall in seaborne met coal prices also points to potential consolidation in the sector and the possibility of supplies tightening down the road. Industry participants highlight that some of the small and mid-sized mining operations that have emerged in the past two years amid a strong price environment are struggling. Bens Creek Group, which operates the Bens Creek Mining project in West Virigina with around 30,000-35,000st (27,200-31,800t) per month of coking coal output, filed for Chapter 11 bankruptcy in April. The year-to-date average price of high-volatile A for 2024 stands at $242.62/t fob Hampton Roads and is estimated to be above production costs for some of these mines. In 2022, high-volatile A prices averaged $347.81/t fob Hampton Roads, driven by a combination of market concerns over the Russia-Ukraine conflict and supply disruptions in Australia. While Russian coking coal remains available and competitively priced in the market, in particular a key supply source for China, US sanctions will continue to put pressure on major coal importers such as India and South Korea to reduce their Russian imports. The US announced fresh sanctions against Russian coal producer Sibanthracite's group of companies earlier this week. By Siew Hua Seah Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US job growth nearly halved in April


24/05/03
24/05/03

US job growth nearly halved in April

Houston, 3 May (Argus) — The US added fewer jobs in April as the unemployment rate ticked up and average earnings growth fell, signs of gradually weakening labor market conditions. The US added 175,000 jobs in April, the Labor Department reported today, fewer than the 238,000 analysts anticipated. That compared with an upwardly revised 315,000 jobs in March and a downwardly revised 236,000 jobs in February. The unemployment rate ticked up to 3.9pc from 3.8pc. The unemployment rate has ranged from 3.7-3.9pc since August 2023, near the five-decade low of 3.4pc. The latest employment report comes after the Federal Reserve on Wednesday held its target lending rate unchanged for a sixth time and signaled it would be slower in cutting rates from two-decade highs as the labor market has remained "strong" and inflation, even while easing, is "still too high". US stocks opened more than 1pc higher today after the jobs report and the yield on the 10-year Treasury note fell to 4.47pc. Futures markets showed odds of a September rate cut rose by about 10 percentage points to about 70pc after the report. Average hourly earnings grew by 3.9pc over the 12 month period, down from 4.1pc in the period ended in March. Job gains in the 12 months through March averaged 242,000. Gains, including revisions, averaged 276,000 in the prior three-month period. Job gains occurred in health care, social services and transportation and warehousing. Health care added 56,000 jobs, in line with the gains over the prior 12 months. Transportation and warehousing added 22,000, also near the 12-month average. Retail trade added 20,000. Construction added 9,000 following 40,000 in March. Government added 8,000, slowing from an average of 55,000 in the prior 12 months. Manufacturing added 9,000 jobs after posting 4,000 jobs the prior month. Mining and logging lost 3,000 jobs. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

UK decoiler Atlantic Steel enters administration


24/05/03
24/05/03

UK decoiler Atlantic Steel enters administration

London, 3 May (Argus) — Birkenhead-based decoiler Atlantic Steel filed for administration yesterday, according to a filing seen by Argus . The company has been under pressure since its previous owners took a large chunk of cash out of the business as part of a management buyout in 2022. Credit insurers began to pull cover on the business towards the end of last year, and suppliers have been calling retention of title, which protects suppliers in the event of insolvency or bankruptcy, in recent days. Sources suggest the debt of the business at the time of administration is around £18mn. The previous owners are preferential creditors after the banks, as they were due another £5mn from the business, according to Companies House filings. Market sources suggest it is likely the business will be bought out of administration, with other service centres interested in the assets — the lease on the site expires in the next few years but is extendable, and Atlantic operates the largest decoiler in the UK, capable of decoiling over 2.5m wide. It is also situated on the dock at Birkenhead, which cuts inland transportation costs. The UK HRC market has been under pressure for a number of months, in line with the struggles seen in Europe. Argus ' weekly assessment was £605/t ddp West Midlands on 2 May, down from a recent peak of £700/t at the start of February. The assessment reached an all-time high of £1,200/t on 31 March 2022, and the management buyout took place later that year. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more