India Fe scrap imports surge in Nov on bulk purchases
Indian ferrous scrap imports in November surged to more than three times higher than the volumes shipped in the same month the previous year, with flows climbing above 1mn t to the highest total in recent memory.
Ferrous scrap imports into India — listed under HS codes 720449, 720441, 720430 and 720450 — climbed by 319.7pc year on year to 1.08mn t in November last year, customs data shows. This is the highest monthly import total in data stretching back to January 2007.
November imports were 14.5pc higher than October's imports, which standing at 943,101t were the second highest monthly total in that 14-year period.
And September's imports, totalling 728,965t, were the sixth highest total. Over that entire 2007-22 period, India's monthly average imports of ferrous scrap was 404,955t.
The sharp rise in imports from September to November last year came as Indian steelmakers re-entered the ferrous scrap bulk import market in force for the first time in several years. Indian ferrous scrap imports in the years prior to 2022 were almost entirely sourced via container, but a surge in demand combined with a drop in bulk freight rates and a fall in Turkish import pricing in summer last year prompted Indian steelmakers to ramp up bulk cargo purchases at speed.
Higher appetite for overseas scrap was driven by a lack of direct reduced iron (DRI) supply and lower domestic scrap flows. Abundant availability of both weighed heavily on Indian ferrous scrap imports throughout 2021 (see graph).
Five deep-sea bulk cargoes left UK ports and arrived into India during October and November, Argus UK vessel tracking data shows. The five cargoes are estimated to have carried 205,000t. And four more cargoes have been tracked to India from the UK arriving in December and January, indicating a potential rise in inflows for December at least.
Before the bulk cargoes were recorded to have arrived from October, no deep-sea bulk cargo has been seen to go to India from UK ports since Argus began tracking the data in January 2019.
And from last July, Indian steelmakers also dipped back into the US bulk market securing a large number of shipments, Argus US vessel tracker data shows. Trade data also shows a number of other deep-sea bulk cargoes, estimated by sharp increases in volumes compared with monthly averages, shipped to India from other countries such as the Netherlands and Venezuela.
Indian demand for deep-sea cargo purchases dropped off sharply from November as steelmakers paused to absorb the vast volumes of tonnage that continued to arrive as a result of their bulk purchasing spree.
Ferrous scrap imports into India across January to November stood at 5.41mn t in 2022, which is up 66.6pc from the same period in 2021. The increase was from a low base, as India's ferrous scrap imports in 2021 hit a 14-year low owing to steelmakers' switch to cheaper DRI and domestic scrap combined with the wider economic impact of the Covid-19 pandemic on the country that year.
Shipments in January-November 2022 from India's top three suppliers, the UAE, US and UK, climbed by 13.4pc, 289.6pc and 182.8pc year on year to 1.16mn t, 787,977t and 660,922t in January-November.
| India's top 10 sources for imported ferrous scrap in 2022 so far | MT | ||
| Country | January-November 2021 | January-November 2022 | Percentage change |
| Total imports | 3,246,247.0 | 5,407,039.0 | 66.6 |
| UAE | 1,023,114.0 | 1,160,181.0 | 13.4 |
| US | 239,806.0 | 787,977.0 | 228.6 |
| UK | 233,702.0 | 660,922.0 | 182.8 |
| Singapore | 202,477.0 | 261,718.0 | 29.3 |
| South Africa | 47,151.0 | 228,347.0 | 284.3 |
| Yemen | 87,851.0 | 193,645.0 | 120.4 |
| Netherlands | 37,971.0 | 151,642.0 | 299.4 |
| Venezuela | 84,089.0 | 149,737.0 | 78.1 |
| Malaysia | 38,918.0 | 128,352.0 | 229.8 |
| — Indian customs data | |||
| Imports listed under HS codes 720449, 720441, 720430, 720450 | |||
Related news posts
US job growth nearly halved in April
US job growth nearly halved in April
Houston, 3 May (Argus) — The US added fewer jobs in April as the unemployment rate ticked up and average earnings growth fell, signs of gradually weakening labor market conditions. The US added 175,000 jobs in April, the Labor Department reported today, fewer than the 238,000 analysts anticipated. That compared with an upwardly revised 315,000 jobs in March and a downwardly revised 236,000 jobs in February. The unemployment rate ticked up to 3.9pc from 3.8pc. The unemployment rate has ranged from 3.7-3.9pc since August 2023, near the five-decade low of 3.4pc. The latest employment report comes after the Federal Reserve on Wednesday held its target lending rate unchanged for a sixth time and signaled it would be slower in cutting rates from two-decade highs as the labor market has remained "strong" and inflation, even while easing, is "still too high". US stocks opened more than 1pc higher today after the jobs report and the yield on the 10-year Treasury note fell to 4.47pc. Futures markets showed odds of a September rate cut rose by about 10 percentage points to about 70pc after the report. Average hourly earnings grew by 3.9pc over the 12 month period, down from 4.1pc in the period ended in March. Job gains in the 12 months through March averaged 242,000. Gains, including revisions, averaged 276,000 in the prior three-month period. Job gains occurred in health care, social services and transportation and warehousing. Health care added 56,000 jobs, in line with the gains over the prior 12 months. Transportation and warehousing added 22,000, also near the 12-month average. Retail trade added 20,000. Construction added 9,000 following 40,000 in March. Government added 8,000, slowing from an average of 55,000 in the prior 12 months. Manufacturing added 9,000 jobs after posting 4,000 jobs the prior month. Mining and logging lost 3,000 jobs. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
UK decoiler Atlantic Steel enters administration
UK decoiler Atlantic Steel enters administration
London, 3 May (Argus) — Birkenhead-based decoiler Atlantic Steel filed for administration yesterday, according to a filing seen by Argus . The company has been under pressure since its previous owners took a large chunk of cash out of the business as part of a management buyout in 2022. Credit insurers began to pull cover on the business towards the end of last year, and suppliers have been calling retention of title, which protects suppliers in the event of insolvency or bankruptcy, in recent days. Sources suggest the debt of the business at the time of administration is around £18mn. The previous owners are preferential creditors after the banks, as they were due another £5mn from the business, according to Companies House filings. Market sources suggest it is likely the business will be bought out of administration, with other service centres interested in the assets — the lease on the site expires in the next few years but is extendable, and Atlantic operates the largest decoiler in the UK, capable of decoiling over 2.5m wide. It is also situated on the dock at Birkenhead, which cuts inland transportation costs. The UK HRC market has been under pressure for a number of months, in line with the struggles seen in Europe. Argus ' weekly assessment was £605/t ddp West Midlands on 2 May, down from a recent peak of £700/t at the start of February. The assessment reached an all-time high of £1,200/t on 31 March 2022, and the management buyout took place later that year. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Italian flat steel trading at premium on low supply
Italian flat steel trading at premium on low supply
London, 3 May (Argus) — Italian coil prices are trading at an atypical premium to northwest EU prices, especially for downstream products such as cold-rolled coil (CRC) and hot-dipped galvanised (HDG) coil. Multiple factors are playing into the current trend, which several producers say is unlikely to be sustainable given higher costs for northwestern mills — most notably, the comparatively brighter economic picture in southern Europe compared with the north, and lower steel output in Italy. Germany manufacturing PMI data has been consistently below Italian levels since August 2022, and registered its last monthly growth nearly two years ago in June 2022. Italian manufacturing has expanded in five months over the same period, registering its last increase in March 2024. In recent years, German manufacturers have been buffeted by the loss of cheap Russian energy, a reduction in demand from key export markets, most notably China, as well as the lack of investment in infrastructure and political difficulties. And yet, German hot-rolled coil (HRC) output increased by 5pc year on year in the first quarter of this year, partially driven by mill restocking, while Italian output slumped by just over 9pc in the same period. Naturally, Acciaierie d'Italia halting furnaces and producing with just one asset of 1 mn t/yr capacity plays a role in the lower overall output, but it has also been running just one rolling line at low capacity. Novi Ligure has nearly stopped, and producing depending on if stocks of raw material match customer enquiry. Financially troubled re-roller Liberty Magona has also produced intermittently and at low levels as it has struggled to obtain letters of credit, and thus only produced when able to buy HRC by paying in advance, or financed by third-parties. Producer Arvedi has taken the decision to drastically reduce or even stop offering CRC over the past year, on its inability to compete with Asian import pricing. CRC is the only major flat steel product to have not been hit by dumping duties in recent years, and weak demand in Asia saw a shift of regional mills to the EU market. Ample quota availability for CRC also meant that safeguards were not a factor, unlike for HDG. Arvedi has continued supplying HDG, and is currently one of two constant Italian suppliers of the material. The only regular supplier of both downstream products has become re-roller Marcegaglia. Again, the mill has mostly been selling CRC for very prompt delivery enquiries, unable to compete with Japanese, Korean and Indian import CRC, which have become the reference. Despite the lower volumes of CRC the producer has been selling, it has tried to maintain the historical €10-20/t differential between CRC and HDG offers, with varying success over the past months. The uncertainty of the HRC import duty on "other countries" material has likely made the producer, which relies heavily on imported coils and is one of the largest spot buyers in the world, less clear on the discounts it can provide given the varied duty it has had to pay in recent quarters. Sales opportunities in central and east Europe over the past months have also aided its order books. Transportation costs, slim margins and regional competition, as well as weak fundamentals, have kept north EU mills more focused on closer-by markets. While some sellers have been present in Italy with both CRC and HDG, they have not been undercutting Italian producers. In addition, demand for HDG has been relatively stable, while stringent safeguard quotas have not allowed Italian prices to fall under pressure from imports. EU car registrations in the first quarter were up by 4.4pc year on year, and although both Germany and Italy posted growth, the German increase was below the average rate for the bloc, while Italy was up by 5.7pc. Clearly, EU producers have offloaded some volumes of both CRC and HDG in the export markets this year, with exports of the products rising dramatically in January-February. The majority of those volumes have come from northwest EU suppliers. Of late, rising import prices have also helped southern mills more, given the quicker impact imports have on domestic prices in the south. By Lora Stoyanova and Colin Richardson HDG CRC spreads $/t Germany and Italy manufacturing PMI Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Australia's WesCEF to pursue Li plans despite hurdles
Australia's WesCEF to pursue Li plans despite hurdles
Singapore, 3 May (Argus) — Australian conglomerate Wesfarmers will still pursue the strategy for its chemicals, energy and fertilisers arm (WesCEF) to be an integrated lithium producer, despite the recent lithium market downturn. Wesfarmers earlier this year warned of unprofitable lithium sales from its Mount Holland project , owing to high production costs as it goes through a ramp-up. But WesCEF plans to weather through the downturn and plow ahead with its lithium downstream developments, given strong long-term fundamentals and despite the market's immaturity and cyclical demand, according to the group's executives on 2 May. Spodumene prices in China — which dominates global consumption of lithium raw materials — were assessed at $1,080-1,180/t on 30 April, down sharply from $5,750-5,900/t at the start of 2023. "It's also worth remembering that when we invested in Covalent and took the final investment decision , lithium hydroxide prices were lower than they are today," said WesCEF's managing director Ian Hansen. Wesfarmers and Chilean lithium firm SQM jointly own Australian firm Covalent Lithium, which looks after the Mount Holland project that includes a mine, concentrator and its 50,000 t/yr Kwinana lithium hydroxide refinery. Completing the refinery's construction and commissioning remains WesCEF's priority, with the mine and concentrator going through a ramp-up, according to WesCEF. The firm is also progressing its potential expansion project for the mine and concentrator, which it submitted an application for environmental approvals. The first lithium hydroxide output out of the Kwinana refinery is still expected in the first half of 2025, with a delay in timeline. Covalent completed its first spodumene concentrate shipment earlier in March, said WesCEF. Wesfarmers expected its share of spodumene concentrate output from Mount Holland to be 50,000t in the current July 2023-June 2024 fiscal year. The share will rise to 150,000-190,000t in the upcoming July 2024-June 2025 fiscal year. Lithium downturn The lithium downturn has led to multiple firms, including major particpants across the lithium and battery supply chain, reporting poor January-March results. Australian lithium and nickel producer IGO, affected by slumps in the lithium and nickel markets, reported its first quarterly loss in years while posting lower output . Major US lithium producer Albemarle's executives have also called the market "unsustainable" in the long run, as it posts a whopping $1.1bn year-on-year fall in sales from its energy storage division. Major Chinese lithium producer Tianqi Lithium also suffered heavy losses, while global lithium firm Arcadium Lithium earlier this year cut its planned sales numbers this year and warned that current market prices will weigh on future supply. South Korea's top battery manufacturer LG Energy Solution (LGES) reported W157bn of operating profit in January-March , but would have reported an operating loss of W32bn if it did not receive almost W189bn in US Inflation Reduction Act tax credits. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more