Generic Hero BannerGeneric Hero Banner
Latest market news

Liberty temporarily idles operational Galati furnace

  • : Metals
  • 23/10/17

Liberty Steel has taken its only operational blast furnace at Galati in Romania off line.

"Liberty Galati's BF No 5 has been temporarily idled due to the severe weather in the Black Sea and the dramatically low levels of the Danube which have impacted the delivery of enough raw materials to safely run the furnace," a company spokesperson said.

"We continue to pay employees working in impacted areas as normal and will restart the furnace later this month."

Sources suggested it was scheduled to restart on 24 October.

There has been chatter about the operational rate of the furnace, and the company's other unit at Ostrava in the Czech Republic, for some months. When Liberty closed the largest of the coke ovens at its Ostrava site in September, sources close to senior leadership said it was contemplating idling its EU blast furnaces because of strained working capital.

The company has been importing Russian and Indonesian slab through trading firms and its Alvance arm recently, as it had reduced blast furnace output. Alvance China also has been used to finance raw materials for its Whyalla plant in Australia and the European operations, sources suggest.

A number of local suppliers suggest they are owed money by Galati, according to media reports.

Ostrava's suppliers also have complained that the company is behind on payments. Asked whether this was correct in April of this year, Liberty told Argus that the European steel market was "experiencing challenging conditions".

Since then, Argus' benchmark daily northwest EU hot-rolled coil (HRC) index has fallen from €834.25/t to €612.50/t, a decline of €221.75/t. Over the same period, spreads between NW HRC and key blast furnace raw materials have dropped from $514/t to $174/t, a reduction of $340/t. Capacity utilisation also has plummeted, eroding economies of scale. European strip producers are operating at 50-60pc utilisation rates, which are lower than last year, when a number of furnaces were idled because of low apparent demand.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

Cyclone Zelia threatens Australian Fe, Li, Mn exports


25/02/12
25/02/12

Cyclone Zelia threatens Australian Fe, Li, Mn exports

Sydney, 12 February (Argus) — Cyclone Zelia off Western Australia's (WA) Pilbara coast is on track to make landfall on 13 February, threatening iron ore, lithium and manganese exports from the region. Australia's Bureau of Meteorology (BoM) expects the cyclone to develop into a relatively rare and extremely powerful category three system on 13 February, as it starts heading towards WA's mines. The Pilbara Ports Authority (PPA) will close Port Hedland — Australia's largest iron ore export hub — at 6pm local time (7am GMT) on 12 February, having started clearing ships out of its berths a day earlier. Port Walcott — a smaller export facility to the west of Port Hedland — is also emptying its berths, in preparation for the cyclone. Cyclone Zelia on 14 February will pass over a part of WA where Fortescue's Iron Bridge mine, Mineral Resources' Wodgina lithium mine, Pilbara Minerals' Pilgangoora lithium mine, and three of Atlas Iron's mines are located, according to BoM forecasts. The cyclone will then move south over Fortescue's Christmas Creek and Cloudbreak iron ore mines, the Roy Hill iron mine, and Consolidated Minerals' Woodie Woodie manganese mine early on 15 February, before losing energy and dissipating by the next morning. Cyclone Zelia is the third weather system to disrupt WA's ports this year. Cyclone Sean flooded parts of Port Dampier and forced PPA to close all of its export facilities for two days at the end of January. Ships subsequently started moving out of Port Walcott and Port Dampier over the first week of February because of Cyclone Tahlia, driving Rio Tinto's exports to their lowest point since at least January 2019 . But WA has experienced extreme weather events before. Cyclone Veronica shuttered three WA ports for nearly a week in March 2019 . Cyclone Ilsa in April 2023 also drove PPA to close Port Hedland for two days . The four main iron ore prices that Argus assesses have risen over the last month. Argus' Iron ore fines 62pc Fe (ICX) cfr Qingdao price rose to $105.80/t on 11 February, from $97.90/t on 13 January. By Avinash Govind Iron ore prices $/t Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexican steel faces few outlets in wake of US tariffs


25/02/11
25/02/11

Mexican steel faces few outlets in wake of US tariffs

Houston, 11 February (Argus) — Mexican steelmakers, facing sluggish domestic demand, could struggle to find outlets for production after the elimination of US steel tariff exemptions. US president Donald Trump on Monday revoked all exemptions from the 25pc steel import tariff, effective 12 March. Canada and Mexico as part of the US-Mexico-Canada Agreement (USMCA) were exempt from Section 232 25pc steel tariffs announced in 2018, along with Argentina, Australia, Brazil, the EU, Japan, South Korea and the UK. The renewed 25pc tariffs also include "derivative steel articles" — downstream and value-added products. Mexico also faces the potential imposition of a 25pc all-goods tariff in March by the Trump administration. Originally meant to be imposed on 1 February, the tariff was delayed by 30 days on 4 February. Should the tariff — which only included Mexico and Canada — be imposed at the end of the postponement, US buyers could face a 50pc tariff on Mexican steel. More Mexico capacity looms The gap left by the imminent exit of the US as a free trade partner leaves Mexican steelmakers with few obvious outlets as a slew of incoming capacity expansions are poised to bloat domestic inventories. Mexico produced 18.2mn metric tonnes (t) of steel in 2024 , down from 19.85mn t in 2023 as steelmakers pulled back production to counter weak demand, according to Mexican steel association Canacero. Mexico exported 3mn t of steel in 2024 — 2.3mn t of which went to the US, according to Canacero. That was followed by Canada, which imported just 118,000t in 2024, and Saudi Arabia, which imported 90,000t. Still, Mexican mills are expected to add more than 5mn t/yr of additional steel production by the first half of 2026. About half of that will come from steelmaker Ternium's slab mill in Pesquería, Nuevo León, which is expected in the first half of 2026. The Ternium slab mill's location in northern Mexico was meant to help supply steel to the USMCA region . Some in the market more recently told Argus that the new tariffs would have very little effect on Pesquería's strategy — positing that the slab produced there could be exported to Ternium's facilities in Brazil. Still, Mexico only exported 27,000t of steel to Brazil in 2023 and it was not listed as a top-10 export partner in 2024. Long steelmaker Deacero in 2023 also announced a $1bn expansion over three years to grow production by 1.2mn t/yr. Deacero's expansion, too, was aimed at meeting expected nearshoring-driven demand in the medium and long term. In 2023, long steelmaker Simec announced a new 500,000t/yr rebar mill and Brazilian steelmaker Gerdau in May announced it was exploring sites for a 600,000t/yr special steel mill in Mexico. Slow demand adds further pressure In the absence of overseas demand for steel, Mexican steelmakers could have to look to a shaky domestic market to offload production. Federally funded infrastructure projects like the Tren Maya, the Olmeca Refinery in Tabasco and the Felipe Ángeles airport near Mexico City either wound down or concluded by 2024. The projects took with them a boon in steel demand and production that faded further as buyers were reluctant to commit to tons before the general elections in June 2024. That demand has yet to recover. Mexican president Claudia Sheinbaum, who took office in October, campaigned partly on the construction of 1mn homes — which would require an uptick in rebar consumption. Sheinbaum is expected to announce her full infrastructure plan on 17 February. The market has few other options for Mexican-produced steel should the government not adopt publicly funded steel-consuming projects as the country faces expectations of slower economic growth this year. Nearshoring efforts, including plans for domestic production of electric vehicles (EVs) from both Chinese EV makers and US automaker Tesla, have stagnated. A wider count of new foreign direct investments in Mexico shrank last year to the lowest level since 2014 . Sheinbaum on Monday confirmed that the Mexican government learned of the steel tariffs from media outlets. Any previously discussed retaliatory measures would come after a clarification of the tariffs, Sheinbaum added. By Marialuisa Rincon Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Trump steel tariffs end exclusions, expand scope


25/02/11
25/02/11

Trump steel tariffs end exclusions, expand scope

Houston, 11 February (Argus) — The US' planned extension of 25pc import tariffs on steel set to go into effect on 12 March will wipe out existing import quotas, exclusions and agreements established during the first administration of President Donald Trump, essentially resetting the playing field for US steel imports. The proclamation signed by Trump on 10 February said the tariffs are intended to increase US steel capacity utilization to 80pc and close loopholes in the existing tariff scheme that have led to increased imports. This would mean certain products that had been excluded from past tariffs, including those not currently made domestically, would no longer be able to be exempted once existing exclusion orders expire or volume quotas are reached, whichever happens first. Trump's latest tariff push will also target a broader swath of downstream steel products, while setting up a dedicated process for US producers and industry groups to request products be subject to the 25pc tariff. The US will determine whether or not to include the product within 60 days of the request. The Trump proclamation cited increased imports of steel derivative products, such as fabricated structural steel and pre-stressed concrete strand, as signs of countries evading the existing tariff, which was implemented under Section 232 of the Trade Expansion Act. Market participants widely expected the reinforcement of the 25pc import tariff for steel. But many initially downplayed the possibility for the import tariff rate to increase to 50pc for Canada and Mexico, which would be the case if the US moves forward with proposed blanket 25pc duties for those two countries next month. Trump first imposed Section 232 national security tariffs of 10pc on aluminum and 25pc on steel imports in March 2018. Since then the tariffs have been partially rolled back on certain countries, while importers were allowed to ask for product-specific exclusions. Currently Australia and Canada can export any steel and aluminum they want to into the US without tariffs, while Mexico can export steel melted and poured in the US-Mexico-Canada (USMCA) agreement region into the US without tariffs, while any material with an origin outside of USMCA is subject to 25pc tariffs. Steel tariff rate quota (TRQ) systems were in place for Argentina, Brazil, the EU, Japan, South Korea and the UK for steel products, with specifics dependent on the country. Steel imports are heavily reliant on the nontariffed countries, with their volumes making up 80pc of the 26.2mn metric tonnes (t) of steel products imported in 2024, according to US Department of Commerce data. By Blake Hurtik Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexican auto exports slow in January


25/02/11
25/02/11

Mexican auto exports slow in January

Mexico City, 11 February (Argus) — Mexico's light vehicle exports fell by 14pc in January from a year earlier as uncertainty over US trade policy raises questions over prospects for exports going forward. Automakers in Mexico shipped 219,414 units in January, with 84pc bound for the US, according to statistics agency Inegi data. January exports declined by 17pc from December. Meanwhile, production edged up by 2pc to 312,257 units in January from a year earlier, while domestic sales rose by 6pc to 119,811 vehicles. Still, domestic sales dropped by 18pc from December. The mixed performance signals a sluggish start for the sector in 2025, following a record-breaking 2024 , when Mexico produced 3.99mn autos and exported 3.49mn. "While the industry continues to grow, it does so at a slower pace," said Guillermo Rosales, president of Mexican retailer association AMDA. Investment in Mexico's auto sector slowed in November and December, reflecting lower producer confidence and expectations of slower economic growth in 2025, Rosales added. AMDA forecasts 1.53mn auto sales in 2025, up by 2.2pc from a year earlier. But should the US impose a proposed 25pc tariff on Mexican vehicles, the forecast falls to 1.48mn sales. Inegi reported 10,881 electric (EV) and hybrid vehicles sold domestically in January, a 36pc annual increase. But sales fell by 30pc from December, marking the segment's first monthly decline since August. Automaker association AMIA said EV and hybrid production jumped by 60pc to 169,929 units last year. While AMIA did not report January figures, an Argus analysis of Inegi data shows production of four of Mexico's five EV and hybrid models reached 16,034 units in January, up by 86pc from December. Inegi did not separate production totals for the Wagoneer S EV and its internal-combustion counterpart, although AMIA reported 4,726 units produced in 2024. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more