EU HRC: Italian mill announces another rise
European coil mills are holding firm in their offers, with the vast majority having now formally informed customers of at least one increase for the first quarter.
Argus' daily Italian hot-rolled coil index rose by €1.75/t today to €418/t ex-works, while the northwest Europe index gained €2.75/t to reach €427.25/t ex-works.
In Italy one steelmaker announced another increase yesterday, referring to Argus' commentary in its note to customers. The €30/t rise takes its official offer to €450-460/t ex-works base, at the same level as or above its competitors in northwest Europe. Another Italian steelmaker has hiked its offer to €440-450/t ex-works base on the back of costlier slab and strengthening import prices.
Turkish mills keep hiking their offers too, with traders servicing southern Europe offered $500/t fob — a level that most deem unworkable at present, despite domestic producers' attempts to ratchet up prices again. There is still talk of sales at $470/t fob, however.
A Brazilian steelmaker recently upped its cold-rolled coil offer to €535/t cif Iberian peninsula, after completing deals at €485/t cif or thereabouts in the last 10 days. A trader has sold slightly above €490/t cif of late into Spain, but has now pushed its offer up.
Some steelmaking executives are starting to suggest buyers are becoming panicked and rushing to procure. But this narrative is not supported by many buy-side sources, who remain relatively sanguine about the recent uptrend.
In Germany one issue is the hyper-competitive market for sheet. Some steel service centres servicing the automotive supply chain are acquiescing to first half of the year deals at an €80/t-plus discount to the same period of this year. This is the level being sought by buyers, which mills have refused as it would make for a torrid 2020; something few can afford after a brutal year. Mills are offering full-year 2020 contracts at a discount of around €50/t compared to this year, while some suggest €440-450/t ex-works base will be possible for first-half 2020 contracts.
The service centres offering such appetising prices are using spot material accumulated during the rapid market downturn of the last few months, as well as some first-quarter arrival material. This poses a headache for their competitors, which cannot source replacement coil at such steep discounts.
While mills are in no rush to finalise contracts as they think upside will continue and provide them with more bargaining power, many buyers are also holding back as they feel slack demand will force producers to relent. Several mill sources surveyed by Argus admit their first-quarter order-books have seen no uptick from the integral automotive sector compared to January-March this year. Many buyers are questioning the actual strength of mill order-books and lead times.
Italian sheet pricing remains depressed, with processors struggling to pass through any more increases despite the bullish stance being adopted by mills.
Related news posts
Baltimore opens third temporary shipping channel
Baltimore opens third temporary shipping channel
New York, 22 April (Argus) — A third temporary shipping channel has opened at the Port of Baltimore to allow more vessel traffic around the collapsed Francis Scott Key Bridge. Located on the northeast side of the main channel, the new passage has a controlling depth of 20-ft, a 300-ft horizontal clearance, and a vertical clearance of 135-ft. When combined with two other temporary channels opened earlier this month the port should be able to handle "... approximately 15 percent of pre-collapse commercial activity," said David O'Connell, the federal on-scene coordinator. The main shipping channel of the Port of Baltimore — a key conduit for US vehicle imports and coal exports — is expected to be reopened by the end of May, the Maryland Port Administration said earlier this month. The bridge collapsed into the water late last month when the 116,851dwt container ship Dali lost power and crashed into one of its support columns. Salvage teams have been working ever since to remove debris from the water and containers from the ship in order to clear the main channel. By Stephen Cunningham Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
China's Lopal starts first Indonesian LFP battery plant
China's Lopal starts first Indonesian LFP battery plant
Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
International Graphite gets Western Australia funding
International Graphite gets Western Australia funding
Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s crude steel output falls on year in March
Japan’s crude steel output falls on year in March
Tokyo, 22 April (Argus) — Japan's crude steel production fell on the year in March on the back of lower demand from the automobile sector, marking the first year-on-year decline in four months. The country produced 7.2mn t of crude steel during March, down by 3.9pc from a year earlier, according to preliminary data released by industry group Japan Iron and Steel Federation (JISF) on 22 April. The lower output is partly because of lower steel demand from the automobile sector, especially as fellow Japanese manufacturer Daihatsu suspended part of its operations since December 2023 after it was accused of tampering safety test results. Crude steel demand may not recover in April as Daihatsu will not reopen all its domestic facilities until 7 May . Japan's crude steel output is forecast to fall by 2.2pc from a year earlier to 21.7mn t in April-June, according to a quarterly forecast released on 11 April by the country's trade and industry ministry (Meti). The year-on-year fall is mostly attributed to weaker demand in the construction sector, especially housing, on the back of rising material costs and labour shortages, according to Meti. JISF separately said on 18 April that steel product demand from the non-housing construction sector during the April 2024-March 2025 financial year is forecast to fall from a year earlier. Demand would remain sluggish, a JISF researcher told Argus , despite several planned large construction projects including semi-conductor plants and data centres. Lower demand from other non-housing construction sectors, including office buildings weighed on overall demand, JISF added. The numbers were not disclosed. By Yusuke Maekawa Japanese ferrous output ('000't) Mar '24 Feb '24 Mar '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,626.4 5,467.5 5,909.1 2.9 -4.8 Specialty steel 1,570.6 1,521.5 1,576.8 3.2 -0.4 Total crude production 7,197.0 6,989.0 7,485.8 3.0 -3.9 Crude steel production method Basic oxygen furnace 5,144.5 5,123.0 5,529.5 0.4 -7.0 Electric arc furnace 2,052.5 1,866.0 1,956.4 10.0 4.9 Pig iron production 5,038.2 5,010.5 5,361.1 0.6 -6.0 Source: Japan Iron and Steel federation *Preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more