Investigation brings US closer to vanadium premium

  • : Metals
  • 21/05/14

Market participants expect a decision on the Section 232 investigation regarding vanadium by 23 May, with most predicating an affirmative determination will make the US fully a premium market.

The US Commerce Department initiated the 232 investigation on 28 May 2020 in response to a petition filed by AMG Vanadium and US Vanadium. Section 232 investigations determine the effect of imports on national security. Previous 232 investigations on steel and aluminum products resulted in 25pc and 10pc tariffs, respectively. No action was taken after a 232 investigation on titanium sponge.

The petition proposed two courses of action regarding vanadium oxides, vanadium carbonitrides, ferro-vanadium, and vanadates if the request was granted. One proposal was that the US impose a 40pc tariff on vanadium imports ad valorem. The other proposed recommendation would impose separate quota volumes with a 20pc tariff placed on shipments below a specified annual import volume and a 40pc tariff on volumes above that specified volume, with the quota declining 10pc points each subsequent year for three years.

The US consumes about 94pc of its vanadium for metallurgical purposes, mostly an alloying agent in the steel and iron industry, according to the US Geological Survey.

Most market participants expect a decision one way or the other, even though its possible the US administration avoids a determination altogether. But a slight majority of participants surveyed by Argus expect tariffs to be put in place. Depending on the magnitude of tariffs placed on vanadium products, it will likely make the US a consistent premium market in the global trade, which in recent history was not always the case despite the country's heavy reliance on imports.

FeV supply

US consumers of ferro-vanadium would likely face the most issues in securing supplies. In the first quarter, the US imported 567 metric tons (t) of ferro-vanadium, almost exclusively from Canada and Austria. Currently, there is one domestic producer of 80pc grade alloy, normally operating under a tolling agreement, and a second domestic producer that manufactures 50pc grade alloy from secondary raw materials. It is still necessary to import feedstock to produce 80pc grade alloy, which would impact the cost of production if tariffs were placed on all vanadium products. If 80pc grade ferro-vanadium was scarce, steel mills would likely have to update melt mixes to consume more 50pc grade alloy, squeezing domestic supplies.

Market participants have also floated the possibility that sellers of imported feedstock may declare force majeure if contract volumes are based on a reference price outside of the US, which is often the case with vanadium pentoxide (V2O5). The US imported 1,738t of vanadium pentoxide by content in 2020, according to Commerce Department data. Although there is vanadium available through recycling spent catalysts, the mode of production that AMG Vanadium uses to produce ferro-vanadium, the US is still also heavily reliant on imports, sources said.

FeNb substitution

One typical avenue for steel mills to limit ferro-vanadium reliance is to switch to ferro-niobium. At high enough prices, ferro-niobium becomes cost-effective as a replacement in some grades of rebar. Still over a longer period, market participants doubt that substitution of ferro-vanadium with ferro-niobium would be utilized on a large scale. Consumers typically begin to consider substitution when ferro-vanadium is trading in the $25-27/lb range, sources said.

Several mills made just that switch to use more ferro-niobium in their melt mixes when vanadium prices rose sharply in 2018 and still utilize the alloy to this day. This has led many to estimate that those with the ability to convert to ferro-niobium consumption over ferro-vanadium already have, leaving little additional market share for ferro-niobium to scoop up should prices spike again.

Not all signs point higher

Although many market participants are concerned about the impact the 232 investigation would have on the flow of ferro-vanadium, most market participants are certain that a significant supplier — Canada — will be exempt from tariffs. If exempted, the US would be able to avoid at least the worst side-effects from an abrupt cut in imports.

At the same time, the US government began negotiations with the EU to address the effects steel and aluminum section 232 tariffs have had on allies. These discussions have raised doubts among market participants in the steel, aluminum and vanadium sectors that the current administration is keen to use the 232 option at all to impose tariffs again, diverging from the efforts made by former president Donald Trump.

That said, commerce secretary Gina Raimondo defended the use of section 232 in April during a discussion about trade action against China. Additionally, President Joe Biden issued an executive order in February on America's supply chains for a general review and recommendations on "federal incentives and any amendments to federal procurement regulations that may be necessary to attract and retain investments in [critical minerals]," which includes alloying, recycling, and reprocessing of minerals. Vanadium was deemed a critical mineral in 2018.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/04/19

India mulls using more natural gas in steel sector

India mulls using more natural gas in steel sector

Mumbai, 19 April (Argus) — India's steel ministry is considering increasing natural gas consumption in the sector as it aims to lower carbon emissions from the industry. Steelmakers held a meeting with the steel ministry earlier this month, to discuss challenges and avenues to increase gas allocation to the sector, according to a government document seen by Argus . Steel producers requested that the government set gas prices at an affordable range of $7-8/mn Btu for them, to make their gas-based plants viable, as well as for a custom duty waiver on LNG procured for captive power. India's LNG imports attract a custom duty of 2.5pc. City gas distribution firms sell gas at market-determined prices to steel companies. Representatives from the steel industry also requested for the inclusion of gas under the purview of the country's goods and service tax, and to be given higher priority in the allocation of deepwater gas, which has a higher calorific value. Deepwater gas is currently deployed mostly to city gas distribution networks. Steelmakers are currently undertaking feasibility tests for gas pipeline connectivity at various steel plants. But a gas supply transmission agreement requires a minimum five-year period for investment approval. The steel industry is heavily reliant on coal, and the sector accounts for about 8-10pc of carbon emissions in the country. A task force of gas suppliers including IOC, Gail, BPCL, Shell, and HPCL and steel producers like Tata Steel, AMNS, All India Steel Re-roller Association and the Pellet Manufacturers Association has been set up, and the team is expected to submit a report on increasing natural gas usage and lowering carbon emissions by 15 May, the government document said. This team is one of the 13 task forces approved by the steel ministry to define the country's green steel roadmap. The steel ministry aims to increase green steel exports from the country in the light of the policies under the EU's Carbon Border Adjustment Mechanism (CBAM), which will take effect on 1 January 2026. Under the CBAM, importers will need to declare the quantity of goods imported into the EU in the preceding year and their corresponding greenhouse gas emissions. The importers will then have to surrender the corresponding number of CBAM certificates. CBAM certificate prices will be calculated based on the weekly average auction price of EU Emissions Trading System allowances, expressed in €/t of CO2 emitted. This is of higher importance to Indian steelmakers as the EU was the top finished steel export destination for Indian steelmakers during the April 2022-March 2023 fiscal year with total exports of 2.34mn t, and has been the preferred choice for Indian steel exports in the current fiscal year owing to higher prices compared to other regions. Indian steelmakers have started to take steps to lower their carbon emissions by announcing collaborations with technology companies to decarbonise, and are trial injecting hydrogen in blast furnaces, and increasing the usage of natural gas in ironmaking. By Rituparna Ghosh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Australia’s Pilbara Mining sees continuing Li demand


24/04/19
24/04/19

Australia’s Pilbara Mining sees continuing Li demand

Singapore, 19 April (Argus) — Australian mining firm Pilbara Minerals' sees continuing lithium demand from its customers, while the firm continues to focus on cost optimisation. Pilbara in March accepted a pre-auction offer of $1,106/dry metric tonne (dmt) for 5,000dmt of 5.5pc-grade lithium concentrate (spodumene) cif China. The price equates to approximately $1,200/dmt 6pc-grade lithium concentrate (spodumene) cif China, said Pilbara, which reflects the "ongoing demand and positive pricing for unallocated production volume". "When you look at the past 60 days up to mid-April, the increases [in lithium prices] are fairly material," said the firm's managing director and chief executive Dale Henderson during the latest quarterly earnings call, adding that the recent uptick in lithium pricing is "comforting". Argus -assessed prices for 6pc-grade lithium concentrate (spodumene) held stable at $1,100-1,200/t cif China on 16 April from a week earlier, rebounding from an all-time low of $850-1,050/t on 27 February. But a standoff has more recently formed between spodumene producers and lithium refineries, with the former maintaining their offer prices and consumers rejecting them. Pilbara's spodumene realised price in January-March fell by 28pc on the quarter to $804/dry metric tonnes (dmt) cif China, despite the average grade of spodumene shipments rising by 0.1 percentage point to 5.3pc, which translates to $927/dmt for 6pc-grade lithium concentrate (spodumene). But the realised price during the quarter remained above its unit operating cost of $519/dmt cif China, which fell by 1pc on the quarter. Pilbara's ending cash balance came in at A$1.8bn ($1.15bn) as at 31 March, down from A$2.1bn a quarter earlier. Output Pilbara's output during January-March rose by 2pc on the quarter and by 21pc on the year to 179,000dmt. The output was propped up by a record monthly production of over 80,000dmt in March, partly because the P680 primary rejection facility reaching its nameplate production capacity in the second half of the quarter. But its chief operating officer Vince De Carolis said the peak performance should not be construed as an annualised run rate. The firm said it is not stockpiling its production volume as it sees "ongoing customer demand". Pilbara's spodumene sales volumes rose by 3pc on the quarter and by 14pc on the year to 165,121dmt for an average 5.3pc grade. Pilbara earlier in February defended its lithium downstream strategy and last month signed a binding agreement with Chinese refiner Ganfeng to carry out a joint feasibility study as they explore building a downstream conversion plant. The two firms are exploring building a lithium hydroxide and/or lithium carbonate conversion plant with 32,000 t/yr of lithium carbonate equivalent capacity, alongside a potential intermediate lithium chemical facility in the country. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Coal sales at Australia’s Whitehaven fall in Jan-Mar


24/04/19
24/04/19

Coal sales at Australia’s Whitehaven fall in Jan-Mar

Sydney, 19 April (Argus) — Australian coal miner Whitehaven reported higher production but lower sales in January-March, with the firm increasing its percentage of high-grade thermal coal sales from the previous quarter. Saleable coal volumes rose by 8pc on the year to 3.9mn t but managed coal sales fell by 7pc to 3.8mn t compared to a year earlier. Sales were 83pc high-grade thermal, higher than 72pc in October-December and 68pc a year earlier. Whitehaven said run-of-mine production at Narrabri was below expectations because of the current panel's geological challenges, leading to reliability and maintenance problems with equipment. Whitehaven's overall sales guidance for the 2023-24 fiscal year remains unchanged at 16mn-17.5mn t for 2023-24 with a unit cost guidance, excluding royalties, of A$103-113/t ($66-$72/t) which the firm said is tracking at the top end. This is because of lower output from Narrabri, which is tracking below its output guidance of 5.1mn-5.7mn t for the fiscal year to 30 June. Whitehaven finalised takeovers of Australian-Japanese joint venture BHP Mitsubishi Alliance's (BMA) 12mn t/yr Blackwater and 4mn t/yr Daunia coking and thermal coal mine in Queensland on 2 April, with initial sales and production data to be reported in its April-June production report. The two mines are anticipated to deliver 4.5mn-5mn t run-of-mine output in April-June, with Whitehaven's revenue breakdown to be 70pc metallurgical and 30pc thermal on an annual basis post-acquisition as it seeks to pivot toward coking coal. Blackwater and Daunia contributed 10.11mn t and 4mn t respectively to BMA's total output in 2023. Whitehaven plans to sell down a 20pc stake in Blackwater to global steel producers, with a process presently underway. Whitehaven views the high calorific value (CV) thermal coal market as well supported in its key Asian markets, and said tightening of sanctions on Russian exporters is containing global supply. India's continuing growth is driving demand and underpinning price sentiment, Whitehaven said, despite a softening in metallurgical coal prices during the quarter . The Argus high-grade 6,000 kcal/kg NAR price averaged $126.74/t fob Newcastle and the 5,500 kcal/kg NAR coal price $93.85/t during January-March, compared with $134.23/t and $96.80/t respectively for October-December. By Tom Major Whitehaven quarterly results Jan-Mar '24 Oct-Dec '23 Jan-Mar '23 Volumes (mn t) Managed coal production 3.9 4.2 3.6 Managed coal sales 3.8 4.7 4.1 Managed coal stocks at period end 1 1.5 1.5 Coal sales mix (%) High-grade thermal coal 83 72 68 Other thermal coal 8 19 26 Metallurgical coal 9 9 6 Prices achieved ($/t) 136 142 280 Thermal coal 136 142 280 Metallurgical coal 213 166 234 Source: Whitehaven Australian coal price comparisons ($/t) Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ISRI rebrands to ReMA, drops scrap from name


24/04/18
24/04/18

ISRI rebrands to ReMA, drops scrap from name

Las Vegas, 18 April (Argus) — The Institute of Scrap Recycling Industries (ISRI) has rebranded to the Recycled Materials Association (ReMA). The new name and rebrand better reflect the evolution within the recycling industry and its member companies, ReMA said at the group's annual convention and exposition in Las Vegas today. Washington, DC-based ReMA represents recycling industries including ferrous and nonferrous metals, electronics, glass, paper, plastics, textiles and tires and rubber. It is a member-driven trade organization that provides advocacy, education, safety and compliance training, and promotes public awareness of the vital role recycled materials play in the US economy, global trade, the environment and sustainable development. ISRI was formed in 1987 when the Institute of Scrap Iron and Steel merged with the National Association of Recycling Industries. Over the last 35 years, the association has seen tremendous growth in size and diversity of its membership, particularly in electronics, consumer brands and EV battery sectors. The trade association has around 1,700 member companies across the US and other 40 countries. By Brad MacAulay Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Australia provides $256mn to high-purity alumina plant


24/04/17
24/04/17

Australia provides $256mn to high-purity alumina plant

Sydney, 17 April (Argus) — Australia's federal Labor government will offer A$400mn ($256mn) in loans to a high-purity alumina (HPA) processing facility, as part of its recently announced Future Made in Australia policy. Canberra has granted Australian developer Alpha HPA the funds via two separate agencies. The Northern Australian Infrastructure Facility and Export Finance Australia's (EFA) A$4bn critical minerals facility will each offer A$160mn and the two agencies will jointly fund a further A$80mn cost overrun facility, with drawdown on the grants contingent on Alpha HPA securing letters of intent for 10,000 t/yr in output. The announcement comes after the Queensland government provided A$21.7mn for the second stage of the facility at the industrial city of Gladstone in Queensland state. Australia's other HPA producer is Cadoux, formerly FYI Resources , is planning a 10,000 t/yr operation in Western Australia (WA) state's Kwinana industrial zone. The firm received an A$3mn grant from the WA government in November for an initial small-scale production plant. Graphite grant Canberra also brought forward an A$185mn EFA loan to Australian emerging graphite producer Renascor for stage 1 of its proposed vertically integrated battery anode material manufacturing project. A downstream graphite concentrator plant is planned for South Australia state with feedstock from the Siviour deposit, the largest outside Africa, Renascor said on 17 April. The original loan was approved in 2022, and Canberra said the concentrator project will now be realised sooner. Stage 2 will produce Australian-made purified spherical graphite for use in lithium-ion batteries required for electric vehicles and renewable technologies, Canberra said. Renascor is progressing advanced engineering designs for the mineral processing plant and non-process infrastructure while discussing binding offtake terms with existing partners, as well as with other battery-anode market participants. By Tom Major Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more