Iron ore braces for plateauing Chinese steel output

  • : Metals
  • 21/09/22

The dramatic decline in seaborne iron ore prices has grabbed headlines in recent weeks but tectonic shifts may be underway in China, paving the way for a new normal for the raw material.

The elephant in the room is the property sector, one of the pillars of steel demand. Talks are rife that China is earnest in its desire to tame the debt levels of property developers. This is to align with the goals of cooling off property sector prices and the government's "housing is for living" rather than speculation approach. This goal is not new. China has talked about the need to cool its property market for years.

Imminent among the concerns is the fate of Chinese developer Evergrande and whether the government will provide a path to bail it out. Many participants attributed a 20 September sell-off in financial markets to Evergrande's debt concerns. Shares of Rio Tinto, the top iron ore producer, are trading around 28pc below this year's peak. Markets have recovered since Monday, with Singapore Exchange iron ore futures regaining most of the losses on 20 September by the time of writing.

Why is Evergrande significant?

It is China's top property developer. The real estate sector accounts for around 40pc of China's steel consumption. The company's debt problems are not new and the question of whether it is too big to fail have been asked over the past few years.

It is in the news now as an interest payment on a bond is due this week, with another payment due on 29 September. The bonds would default if the company fails to make the payment and increases risk of a larger contagion. When giants fall, the market's risk appetite retreats.

Why is iron ore falling?

Physical iron ore prices have not moved so far this week with China on holiday for the mid-autumn festival.

But iron ore prices have been on the decline for the past weeks because of steelmaking cuts in the country as China looks to control output. The Evergrande crisis and its looming payment test are not why iron ore prices have shed their gains, with the month-to-date average down by 0.1pc versus September 2020 average. Evergrande's fate though could be a harbinger of whether China walks the talk on managing debt levels of its property sector. A boom in the Chinese property sector over the years has worked to the advantage of iron ore and steel demand, with developers able to borrow even ahead of finishing projects and amassing massive debt that leaves the wider financial system, including investors and banks exposed. The government wants to change this. A reined-in property sector will have a bearing on demand for steel products, especially rebar.

Will iron ore continue to fall?

Spot market prices will always react to supply-demand dynamics. China's iron ore imports have been rising consecutively over the past decade. This year marks a watershed moment in that the efforts to tame crude steel production are likely to bring 2021 annual production on a par or even below last year's 1.06bn t. That leaves the question of steel demand.

Iron ore and steel prices have previously moved in the same direction as curbs on steel output have lifted mills' margins. This year, the margin pressure is maintained by the record rise in metallurgical coal prices. Notwithstanding coking coal, mills are cutting production due to policy requirements. A draft autumn-winter pollution controls plan has called for cities in northern Hebei and Shanxi, east and south Shandong and some in the south of Henan to be brought under controls. This is over the emissions controls typically seen during the 1 October-1 March period across Beijing-Tianjin-Hebei and the neighbouring 2+26 cities, alongside the Fenwei Plain area.

The market has little wriggle room to respond to any natural resetting of supply-demand dynamics as a result. The taming of the property sector will cut demand for rebar products that are often considered lower on the steel value chain as they can be made with comparatively less value-addition than flat steel products. This aligns with the growth trajectory of developed economies. Producing high value-add products allows countries to capture a bigger share of the product's price. Further declines in iron ore prices will be a function of Chinese steelmaking cuts through the rest of the year and any iron ore supply disruptions.

Supply disruptions are harder to predict, but the top-producing countries Australia and Brazil are out of the seasonally weaker shipment periods. Supplies from Australia were under pressure in the first half of the year on weather and logistics issues, while market participants have recently flagged the tight availability of Brazilian Iron Ore Carajas fines as why the grade spread is supported despite overall weakness in iron ore demand.

Earlier this month, Vale said it expects to reach a production capacity of 370mn t/yr by the end of 2022, down from a previous target of 400mn t/yr. The announcement was met with silence from the spot market, which deemed it too "long-term" a factor to consider but it highlights the persistent risks to supply estimates.

Supply-demand response

As Chinese steel production plateaus and arguably its iron ore demand stagnates, who could take up China's share of iron ore demand?

Developing economies like India and Vietnam typically have an insatiable appetite for steel. India has a massive iron ore appetite to feed its annual crude steel output of around 100mn t, with the potential to increase the blast furnace-basic oxygen furnace production route that stood at 45pc in the year ended March 2021. But India has sufficient reserves domestically.

Vietnam's annual crude steel production of some 20mn t may not be enough to redirect trade flows for iron ore. In the short term, robust ex-China pig iron production amid governments' stimulus packages will be a demand driver as China pulls back. The decline in iron ore prices, which are benchmarked on cfr China levels, may be visible first in the iron ore supply chain with high-cost miners likely to scale back.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

China's Lopal starts first Indonesian LFP battery plant


24/04/22
24/04/22

China's Lopal starts first Indonesian LFP battery plant

Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

International Graphite gets Western Australia funding


24/04/22
24/04/22

International Graphite gets Western Australia funding

Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Australia's QPM to focus on gas, cut Tech battery spend


24/04/22
24/04/22

Australia's QPM to focus on gas, cut Tech battery spend

Sydney, 22 April (Argus) — Australian battery metals refiner Queensland Pacific Metals (QPM) will focus on energy markets via its Moranbah gas project (MGP) and limit further expenditure on its Townsville Energy Chemicals Hub (Tech) project. The firm will switch its prioritisation to its wholly-owned QPM Energy (QPME) business, with QPME's chief executive David Wrench to be appointed as QPM chief executive, the company said on 22 April. MGP's coal mine waste gas output from nearby the coal mining hub of Moranbah in Queensland's Bowen basin will be increased to 35 TJ/d (935,000 m³/d) by late 2024, up from October-December 2023's 28 TJ/d, with QPME to accelerate production and reserves to provide required peaking power for the national electricity market (NEM) via Thai-controlled energy firm Ratch Australia's 242MW Townsville Power Station. QPME aims to drill a further seven wells by the year's end, increase workovers and increase production from third-party supply of waste mine gas from regional coal mines. The company is also seeking to develop a portfolio of plants to supply up to 300MW of gas-fired power to the NEM, while compressed natural gas and micro-LNG facilities will also be developed in Townsville and Moranbah, QPME said. A surge in government support for renewable power generation in order to meet Australia's 2030 emissions target by retiring coal-fired power means more gas-peaking plants will likely be needed in the coming years to support variable generators. But Australia's domestic gas supply is forecast to experience shortfalls this decade, with predictions of a 76 PJ/yr gap in 2028. The Tech project which aims to produce 16,000 t/yr of nickel and 1,750 t/yr of cobalt sulphates from imported laterite ore saw its funding significantly reduced in February because of what QPM described as a "challenging investment environment" resulting from depressed nickel prices. By Tom Major Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

India mulls using more natural gas in steel sector


24/04/19
24/04/19

India mulls using more natural gas in steel sector

Mumbai, 19 April (Argus) — India's steel ministry is considering increasing natural gas consumption in the sector as it aims to lower carbon emissions from the industry. Steelmakers held a meeting with the steel ministry earlier this month, to discuss challenges and avenues to increase gas allocation to the sector, according to a government document seen by Argus . Steel producers requested that the government set gas prices at an affordable range of $7-8/mn Btu for them, to make their gas-based plants viable, as well as for a custom duty waiver on LNG procured for captive power. India's LNG imports attract a custom duty of 2.5pc. City gas distribution firms sell gas at market-determined prices to steel companies. Representatives from the steel industry also requested for the inclusion of gas under the purview of the country's goods and service tax, and to be given higher priority in the allocation of deepwater gas, which has a higher calorific value. Deepwater gas is currently deployed mostly to city gas distribution networks. Steelmakers are currently undertaking feasibility tests for gas pipeline connectivity at various steel plants. But a gas supply transmission agreement requires a minimum five-year period for investment approval. The steel industry is heavily reliant on coal, and the sector accounts for about 8-10pc of carbon emissions in the country. A task force of gas suppliers including IOC, Gail, BPCL, Shell, and HPCL and steel producers like Tata Steel, AMNS, All India Steel Re-roller Association and the Pellet Manufacturers Association has been set up, and the team is expected to submit a report on increasing natural gas usage and lowering carbon emissions by 15 May, the government document said. This team is one of the 13 task forces approved by the steel ministry to define the country's green steel roadmap. The steel ministry aims to increase green steel exports from the country in the light of the policies under the EU's Carbon Border Adjustment Mechanism (CBAM), which will take effect on 1 January 2026. Under the CBAM, importers will need to declare the quantity of goods imported into the EU in the preceding year and their corresponding greenhouse gas emissions. The importers will then have to surrender the corresponding number of CBAM certificates. CBAM certificate prices will be calculated based on the weekly average auction price of EU Emissions Trading System allowances, expressed in €/t of CO2 emitted. This is of higher importance to Indian steelmakers as the EU was the top finished steel export destination for Indian steelmakers during the April 2022-March 2023 fiscal year with total exports of 2.34mn t, and has been the preferred choice for Indian steel exports in the current fiscal year owing to higher prices compared to other regions. Indian steelmakers have started to take steps to lower their carbon emissions by announcing collaborations with technology companies to decarbonise, and are trial injecting hydrogen in blast furnaces, and increasing the usage of natural gas in ironmaking. By Rituparna Ghosh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more