Generic Hero BannerGeneric Hero Banner
Latest market news

Metinvest shores up coal supply amid Russia disruptions

  • : Coking coal, Metals
  • 19/07/11

Ukrainian steelmaker Metinvest has turned to the seaborne coking coal market in the past 2-3 weeks to replace Russian supply that has been cut off since Moscow imposed a new permitting process on coal exports to Ukraine on 1 June.

Metinvest has not received any Russian coking coal since 1 June, the company said. Prior to the disruption, Russian coking coal and pulverised coal injection accounted for 30pc of the steelmaker's blend.

Steel market participants this week have been speculating about whether Metinvest's current pull-back from the billet and hot rolled coil (HRC) market might be connected to the coal supply disruption. But the steelmaker confirmed today that it had sufficient coking coal stocks to provide a short-term buffer and has taken steps to mitigate any operational impact by hitting the seaborne market, booking significant volumes in the past 2-3 weeks in order to offset the lost Russian volumes. A market participant estimated the volume affected to be up to 1mn t, depending on the duration of the disruption.

The latest bookings are multi-origin, sourced from countries including Australia, the US and Indonesia. Market participants have also noted recent Ukrainian bookings directly from Amsterdam-Rotterdam-Antwerp stocks.

The mill's coking coal requirements are now covered until Autumn, and its US subsidiary United Coal Company (UCC) is offering 80,000t of Affinity low-volatile coking coal for August-September shipment — in line with UCC's prior target of selling 200,000t in the merchant market this year.

Affinity low-volatile coking coal typically has a dry ash content of 7.75pc, dry sulphur at 0.75pc and volatile matter at 17pc dry basis. CSR is pegged at 64.9 or 67.8 depending on method of testing.

Argus today assessed US low-volatile coking coal prices at $169.50/t fob Hampton Roads, compared with the daily fob Australia index for premium hard low-volatile coking coal at $187.80/t.

The steelmaker also indicated interest in Canadian low-volatile grades, but said its low-volatile requirements are largely covered by its own assets — namely UCC in the US and Ukraine's Pokrovske mine, in which Metinvest has a 24.99pc stake. UCC and the Pokrovske project each supply Metinvest with around 3mn t/yr of coking coal, comprising a mix of low-volatile and high-volatile type A grades.

Metinvest confirmed it has received offers from European mills looking to offload excess met coke, but is currently fully covered by its own coke production. It is particularly unlikely to need a top-up given it is reducing steel production in reaction to market dynamics.

A Mediterranean steelmaker is understood to have offered met coke at $280/t cfr Mariupol 2-3 weeks ago, but the offer failed to attract buying interest, with one market participant commenting that the price was too high relative to regional pig iron prices.

Argus today assessed Ukrainian basic pig iron at $340/t fob Black Sea, up from $333/t three weeks ago on the back of tight availability. Conversely, fob China met coke benchmarks have fallen over the same period, to $292/t from $310.40/t for 62 CSR, according to Argus assessments.

Steel production cuts

Metinvest confirmed it is reducing steel production because of scheduled maintenance at several blast furnaces at its plants and joint ventures. Sources say this is also linked to the general weakness of the flat steel market and slim margins.

The firm expects pig iron production to fall by 200,000t in the third quarter compared with the second quarter. Modernisation of its rolling mill at the Ilyich plant will take out 150,000t of HRC in the same period, but output will be ramped up in the last quarter of the year.

The mill is understood to be inactive on the spot market for some steel products at the moment, owing to the reduction in output in the third quarter. It would normally be offering from its August rolling programme, but no new offers were heard by Argus this week.

Slow demand for flat products in Europe and Turkey has also hit CIS suppliers. Although there are duties on CIS HRC imports in the EU — which have limited mills' access to the market — safeguard quotas on other flat steel, in addition to the automotive sector weakness, are impeding overall sales to the region. In the meantime, demand from Turkish buyers — for many of which Europe is the largest export destination — has dwindled this year.

But with maintenances at a number of CIS producers already started, and a fire at MMK this week taking the company off the spot market, a squeeze in CIS supply may ensue, which could balance out supply-demand dynamics in the Black Sea region.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

25/05/22

European Parliament adopts carbon border changes

European Parliament adopts carbon border changes

Brussels, 22 May (Argus) — The European Parliament today approved changes to the bloc's carbon border adjustment mechanism (CBAM) that are estimated to exempt 90pc of importers from the measure, linked to the EU emissions trading system (ETS), although a final legal text still needs to be agreed with EU member states. The parliament adopted by a large majority the European Commission's proposal, with a minor amendment to clarify that CBAM covers electricity importers but not power generated "entirely" in the European Economic Area (EEA) countries Iceland, Liechtenstein and Norway and imported to the EU. These countries are covered by the EU ETS. The adopted text also confirms the start date for CBAM certificate sales as 1 February 2027, pushed back from 2026 previously, to "address significant uncertainties related to the year 2026". Parliament said the new de minimis mass threshold of 50t would exempt 90pc of importers from the CBAM. The commission designed the changes to continue to cover the bulk of CO2 emissions from imports of iron, steel, aluminium, cement and fertilisers. Most fertiliser imported to the EU is in the form of bulk shipments, which are well above 50t. Russia earlier this week launched a formal dispute procedure at the World Trade Organisation against CBAM as an "alleged export subsidy". By Dafydd ab Iago Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexican GDP outlook dims on tariffs: IMEF


25/05/21
25/05/21

Mexican GDP outlook dims on tariffs: IMEF

Mexico City, 21 May (Argus) — Mexico's association of finance executives IMEF lowered its 2025 growth forecast for a fourth consecutive month, citing the growing impact of US tariffs on the economy. GDP is now expected to grow just 0.1pc in 2025, according to IMEF's May survey, down from 0.2pc estimates in April, 0.6pc in March and 1pc in February. The number of respondents forecasting a contraction in GDP rose to 16, or 37pc of the sample, from nine in April. While the US has granted some exemptions and discounts for Mexican goods meeting regional content rules, IMEF said the effective tariff rate on Mexican exports remains higher than that for Canada, Brazil, India, Vietnam and others. "We're already seeing the [tariffs'] impacts," said IMEF economic studies director Victor Herrera, adding that May trade data will likely show a sharp drop in Mexican exports to the US. Trade is also being hit by a screwworm outbreak in cattle that led to port closures last week and curtailed beef exports, which account for $1.3bn in annual exports. More automakers could relocate or scale back production in Mexico, Herrera said, after Stellantis confirmed plans to shift some operations to the US and recent reports Nissan may close one or both of its Mexican plants. In response, Mexico this week sent deputy economy minister Luis Rosendo Gutierrez to Tokyo to meet with Mazda, Nissan, Toyota and Honda executives. IMEF cut its 2025 job creation forecast to 200,000 in May from 220,000 in April. Mexico's social security administration IMSS reported only 43,500 new jobs over the past 12 months as of 5 May. Beyond trade, IMEF flagged uncertainty from recent constitutional reforms and the potential for a US tax on remittances as additional risks to growth. The group held its 2025 inflation forecast steady at 3.8pc, despite Mexico's consumer price index rising to 3.93pc in April from 3.80pc in March . IMEF noted concerns about a potential rebound in inflation later this year after the central bank cut its benchmark interest rate by 50 basis points to 9pc on 8 May — the third such cut in 2025. The group now sees the end-2025 rate at 7.75pc, down from 8pc previously. IMEF expects the peso to end the year at Ps20.80/$1, slightly lower than the Ps20.90/$1 forecast in April. The peso recently strengthened to Ps19.34/$1, though Herrera said this reflected dollar weakness more than peso strength. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

IEA warns of lithium and copper deficits by 2035


25/05/21
25/05/21

IEA warns of lithium and copper deficits by 2035

London, 21 May (Argus) — The Paris-based IEA has warned that global deficits of copper and lithium by 2035 could be exacerbated in some regions owing to concentration of supply and refining, leading to a potential "Opec moment" for critical minerals. In its new Global Critical Minerals Outlook report, the IEA said lithium could see a 40pc deficit by 2035, even if all current projects proceed, while copper is expected to reach a 30pc deficit by the same year. "Diversification is the watchword for energy security, but the critical minerals world has moved in the opposite direction in recent years, particularly in refining and processing," the report's executive summary said. "The average market share of the top three refining nations of key energy minerals rose from around 82pc in 2020 to 86pc in 2024 as some 90pc of supply growth came from the top single supplier alone: Indonesia for nickel and China for cobalt, graphite and rare earths." In the lithium market, demand tripled from 2020 to 2024, and will triple again by 2035. By then, the electric vehicle (EV) sector will make up 90pc of additional demand while 95pc of future demand growth comes from battery applications: EVs, grid-scale energy storage and battery backup systems, reaching 3.7mn t LCE by 2035. Three countries — Australia, China and Chile — will control up to 69pc of lithium mining by 2030, while China is expected to control 62pc of refining by the same year. "China extracts only 22pc of lithium — but controls 70pc of global refining and 95pc of hard-rock lithium processing," the report said. The copper market is also expected to grow rapidly, supporting the energy transition, but underinvestment and dwindling resource quality will limit supply. Copper demand rises by 30pc by 2040 under the IEA's base-case (STEPS) scenario, up from 27mn t in 2024 to 34mn t by 2040. The IEA predicts a sharp deficit in supply by 2035, up to a 30pc deficit in primary supply. China is expected to dominate refining of copper, responsible for 47pc in 2030. The report said investment of up to $150bn-180bn is needed to keep pace with the global energy transition. "Despite strong copper demand from electrification, the current mine project pipeline points to a potential 30pc supply shortfall by 2035 due to declining ore grades, rising capital costs, limited resource discoveries and long lead times," the report said. By Thomas Kavanagh Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Community Union lambasts Liberty Steel ownership


25/05/20
25/05/20

Community Union lambasts Liberty Steel ownership

London, 20 May (Argus) — Trade union Community and UK politicians have lambasted the "irresponsible" ownership of UK firm Liberty Steel, with the company's Speciality Steels unit facing a winding up petition tomorrow. "New, responsible ownership is needed to give the business the brighter future it needs and deserves, and that can only be achieved with a decisive change at the top. Enough is enough — Sanjeev Gupta must invest in the business or step aside," Community Union general secretary Roy Rickhuss said. "Our Stocksbridge Speciality Steels site needs new, competent ownership to maximise its potential, so that the business has a real chance for success," Labour Member of Parliament for Penistone and Stocksbridge Marie Tidball said. The business, which has operated at a fraction of its nameplate capacity in recent years, is subject to a winding up petition submitted by major creditor Harsco and supported by a number of other creditors. The petition hearing had been delayed, but the company recently withdrew its own restructuring plan as it was clear it had insufficient creditor support to be approved . Liberty had been in talks with the government, with some suggesting it was seeking investment to keep the business afloat, or a sale. "We continue to closely monitor developments around Liberty Steel, including any public hearings, which are of course a matter for the company", a spokesperson for the Department for Business and Trade said. "It is ultimately for Liberty to manage commercial decisions on the future of its companies, and we hope it succeeds with its plans to continue on a sustainable basis." Company sources suggested the winding up petition will go ahead tomorrow, with the official receiver likely to be appointed shortly after. But Liberty is seeking an adjournment to buy time, the sources said. The government's intervention in British Steel, whereby it passed a law enabling it to direct the company, has prompted some talk that it could do the same with Liberty's Speciality business. Speciality produces high-grades supplied into strategic sectors, such as aerospace, and has the benefit of already being electric arc furnace-based. Its problems in recent years have been driven more by cash constraints rather than market conditions, given the higher-value of some of its product lines. But rising costs and tough trading conditions have clearly been a factor as well. Some market participants said the government could look to connect some of the Speciality plants and British Steel to attract private investment. But others suggested the Speciality business may be more attractive to private investors as a stand-alone unit, and that there will be interest should it fall into administration. Liberty said the UK sector has "for many years faced major challenges due to high energy costs and an over reliance on cheap imports". It also said it continues to hold discussions with creditors on restructuring the unit's debt, and is "grateful for the patience and fortitude" of colleagues and stakeholders. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

India's Shyam Metalics to build West Bengal wagon plant


25/05/20
25/05/20

India's Shyam Metalics to build West Bengal wagon plant

Mumbai, 20 May (Argus) — Indian metals producer Shyam Metalics will build a state-of-the-art wagon manufacturing facility in Kharagpur, West Bengal, with an annual production capacity of 4,800 wagons, the firm announced on 19 May. The company plans to build the facility under its step-down subsidiary, Ramsarup Industries, and expects to begin operations by March 2026. The plant will be developed in two phases. The first phase will have a production capacity of 2,400 wagons/yr, or approximately 8 wagons/d, while the second phase will double output to 4,800 wagons/yr. The firm aims to produce a variety of wagons at the plant, including flat, open, box, covered, tank and specialised wagons. The plant will adopt the "Uni-Flow" manufacturing layout according to international standards to ensure efficient production, said company director Sheetij Agarwal. The move is a key part of Shyam Metalics' defined five-year capital expenditure plan and aligns closely with the government's "Make in India" and "Atmanirbhar Bharat" initiatives, highlighting Shyam Metalics' dedication to fostering self-reliance in critical infrastructure, the firm said. The facility reflects the company's commitment to innovation, sustainability, and nation-building, it added. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more