Generic Hero BannerGeneric Hero Banner
Latest market news

Chinese 5G rollout lifts lithium battery demand

  • Market: Metals
  • 19/03/20

The rollout of fifth-generation (5G) telecom networks is not only driving demand for electronic metals in network equipment, but increasing demand for lithium batteries to provide back-up power for base stations.

Lithium-iron phosphate (LFP) batteries are increasingly replacing lead-acid batteries in telecom networks as they provide higher energy density. And with the signal ranges in 5G networks running shorter than those in 4G networks, the rollout will require more base stations to provide coverage, particularly in cities, in turn requiring more back-up power.

Consequently, power consumption from the telecom industry is set to climb with the installation of 5G base stations. Typical power demand from 4G base stations is 780-930MW, while 5G base stations consume 3.4-3.7GW, according to investment bank Guotai Junan Securities. The bank expects demand for lithium batteries from the 5G sector to jump to 13.3GWh this year from 2.7GWh last year, rising further to 14.5GWh in 2021 and to 16GWh in 2022.

State-owned telecom service provider China Mobile and telecom infrastructure firm China Tower have recently issued tenders for 2GWh of LFP batteries for their 5G networks. China Tower has switched from using lead-acid batteries to procuring recycled LFP batteries from electric vehicles.

China Tower added a net 69,000 new network sites last year, bringing its total to 1.994mn, it said today, and expects it tower business to continue growing with the expansion of 5G. The company is expanding its energy business in tandem, with a portfolio of power back-up and generation, charging and battery exchange in line with growing demand for 5G base station co-location.

The Chinese government is set to release investment funds to accelerate the construction of new infrastructure, including 5G networks and data centres, according to the government's National Development and Reform Commission (NDRC). The installation of network equipment such as base stations and data servers is expected to raise demand for minor metals, including gallium, indium and silicon.

The NDRC approved 15.3bn yuan of investment in 19 projects in the first two months of this year, primarily in the transportation and technology industries.

The Chinese government has put forward plans to stimulate the economy by investing in seven areas — 5G networks, the industrial Internet of Things (IoT), transportation systems, data centres, artificial intelligence, ultra-high-voltage networks and electric vehicle charging stations. The NDRC is moving ahead with investments and working with provincial and municipal governments to reform the project management process for foreign investment.

China is expected to account for 70pc of global 5G connections in 2020, according to telecom industry body the GSM Association. Chinese telecom operators are expected to invest more than $180bn in 2020-25 in mobile capital expenditure, about 90pc of which will be on 5G networks.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
20/05/25

Community Union lambasts Liberty Steel ownership

Community Union lambasts Liberty Steel ownership

London, 20 May (Argus) — Trade union Community and UK politicians have lambasted the "irresponsible" ownership of UK firm Liberty Steel, with the company's Speciality Steels unit facing a winding up petition tomorrow. "New, responsible ownership is needed to give the business the brighter future it needs and deserves, and that can only be achieved with a decisive change at the top. Enough is enough — Sanjeev Gupta must invest in the business or step aside," Community Union general secretary Roy Rickhuss said. "Our Stocksbridge Speciality Steels site needs new, competent ownership to maximise its potential, so that the business has a real chance for success," Labour Member of Parliament for Penistone and Stocksbridge Marie Tidball said. The business, which has operated at a fraction of its nameplate capacity in recent years, is subject to a winding up petition submitted by major creditor Harsco and supported by a number of other creditors. The petition hearing had been delayed, but the company recently withdrew its own restructuring plan as it was clear it had insufficient creditor support to be approved . Liberty had been in talks with the government, with some suggesting it was seeking investment to keep the business afloat, or a sale. "We continue to closely monitor developments around Liberty Steel, including any public hearings, which are of course a matter for the company", a spokesperson for the Department for Business and Trade said. "It is ultimately for Liberty to manage commercial decisions on the future of its companies, and we hope it succeeds with its plans to continue on a sustainable basis." Company sources suggested the winding up petition will go ahead tomorrow, with the official receiver likely to be appointed shortly after. But Liberty is seeking an adjournment to buy time, the sources said. The government's intervention in British Steel, whereby it passed a law enabling it to direct the company, has prompted some talk that it could do the same with Liberty's Speciality business. Speciality produces high-grades supplied into strategic sectors, such as aerospace, and has the benefit of already being electric arc furnace-based. Its problems in recent years have been driven more by cash constraints rather than market conditions, given the higher-value of some of its product lines. But rising costs and tough trading conditions have clearly been a factor as well. Some market participants said the government could look to connect some of the Speciality plants and British Steel to attract private investment. But others suggested the Speciality business may be more attractive to private investors as a stand-alone unit, and that there will be interest should it fall into administration. Liberty said the UK sector has "for many years faced major challenges due to high energy costs and an over reliance on cheap imports". It also said it continues to hold discussions with creditors on restructuring the unit's debt, and is "grateful for the patience and fortitude" of colleagues and stakeholders. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

India's Shyam Metalics to build West Bengal wagon plant


20/05/25
News
20/05/25

India's Shyam Metalics to build West Bengal wagon plant

Mumbai, 20 May (Argus) — Indian metals producer Shyam Metalics will build a state-of-the-art wagon manufacturing facility in Kharagpur, West Bengal, with an annual production capacity of 4,800 wagons, the firm announced on 19 May. The company plans to build the facility under its step-down subsidiary, Ramsarup Industries, and expects to begin operations by March 2026. The plant will be developed in two phases. The first phase will have a production capacity of 2,400 wagons/yr, or approximately 8 wagons/d, while the second phase will double output to 4,800 wagons/yr. The firm aims to produce a variety of wagons at the plant, including flat, open, box, covered, tank and specialised wagons. The plant will adopt the "Uni-Flow" manufacturing layout according to international standards to ensure efficient production, said company director Sheetij Agarwal. The move is a key part of Shyam Metalics' defined five-year capital expenditure plan and aligns closely with the government's "Make in India" and "Atmanirbhar Bharat" initiatives, highlighting Shyam Metalics' dedication to fostering self-reliance in critical infrastructure, the firm said. The facility reflects the company's commitment to innovation, sustainability, and nation-building, it added. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

GFG puts Australian Mn plant on care and maintenance


20/05/25
News
20/05/25

GFG puts Australian Mn plant on care and maintenance

Sydney, 20 May (Argus) — UK-owned steelmaker GFG Alliances has placed its Liberty Bell Bay manganese alloy smelter in Tasmania into care and maintenance over manganese ore supply issues, Tasmanian minister for business, industry and resources Eric Abetz said on 19 May. GFG is committed to the long term success of the Liberty Bell smelter and expects the pause to be temporary, a company spokesperson told Argus on 20 May. The Tasmanian state government is working with GFG and the Australian federal government to address challenges at the plant. It has also asked prime minister Anthony Albanese to support Liberty Bell, state premier Jeremy Rockcliff said on 20 May. Liberty Bell Bay is Australia's only ferroalloy plant and is permitted to produce a combined total of 290,000 t/yr of ferromanganese and silicomanganese. GFG sources Liberty Bell Bay's manganese ore from Australian metal producer South32's Australian Gemco mine and South African sites, which have faced recent production disruptions because of bad weather and maintenance shutdowns. Cyclone Megan flooded and damaged parts of Gemco in March 2024, taking it off line for four months. South32 closed the mine again in January-March 2025 to complete mine dewatering work. South32 also cut manganese production at its South African operations by 10pc on the year in January-March because of scheduled maintenance work and an unplanned shutdown at its Wessels mine. Gemco's manganese production is forecast to reach approximately 5mn t in the 2025-26 financial year ending 30 June, the Northern Territory state government said in a budget announcement. South32 has not released its Gemco production guidance for 2025-26. Liberty Bell Bay's production pause comes after the South Australian state government placed GFG's 1.2mn t/yr Whyalla steelworks into administration in February. The state government later announced plans to transfer control of the Whyalla port from GFG to the steelwork's administrators. Liberty Bell Bay is one of only six facilities in Tasmania covered under Australia's federal safeguard mechanism. It received 8,762 safeguard mechanism credits (SMCs) for the July 2023-June 2024 compliance year as its covered scope 1 emissions of 196,125t of CO2 equivalent (CO2e) were below its baseline of 204,887t of CO2e. Two facilities operated by GFG — the Whyalla steelworks and the Middleback Range iron ore mine — ended the compliance year in an excess emissions situation because they were in administration, according to the Clean Energy Regulator (CER). By Avinash Govind and Juan Weik Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

China's CATL raises $4.6bn from Hong Kong IPO


20/05/25
News
20/05/25

China's CATL raises $4.6bn from Hong Kong IPO

Beijing, 20 May (Argus) — China's largest battery producer CATL has raised $4.6bn from the sale of 135.6mn of its shares on the main board of the Hong Kong Stock Exchange today. This is likely to be the world's largest initial public offering (IPO) in 2025. CATL's shares hit a high of HK$299.80 ($38.40) in the morning trading session, up by 14pc from its listing price of HK$263. CATL's Hong Kong IPO is expected to enhance its international brand influence and finance its expansions in the global battery market, according to industry participants. CATL is not only a battery component manufacturer and system solution provider, but also aims to be a pioneer of the global zero-carbon economy, said company chairman Zeng Yuqun at the listing ceremony. The world's total investments in vehicle electrification will hit $3 trillion by 2030, and more than $10 trillion will be invested in renewable energy by 2050, according to CATL. CATL's electric vehicle battery installations rose by 40pc on the year to 84.9 GWh in January-March, accounting for 38pc of the world's total installations, data from South Korean market intelligence firm SNE Research show. Its total battery capacity is projected to reach 700-1,000 GWh/yr in 2025, making it the world's first TWh-level battery manufacturer, according to market participants. The firm has been accelerating expansions outside China in recent years, with projects in Germany, Hungary, Spain, and Indonesia. The company is also facing geopolitical pressure because of the US' higher tariffs on Chinese battery imports and accusations by some US politicians of having supply chain connections to forced labour. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Deere sees paying $500mn in US tariffs through Oct


16/05/25
News
16/05/25

Deere sees paying $500mn in US tariffs through Oct

Houston, 16 May (Argus) — Heavy equipment manufacturer John Deere expects US import tariffs to cost the company $500mn in the fiscal year that ends in October. The Illinois-based company paid roughly $100mn in tariffs in its fiscal second quarter, which ended 27 April. It expects to pay the US government another $400mn in tariffs during the second half of its fiscal year, executives said Thursday on an earnings call. Deere plans to recoup its tariff costs through a combination of charging higher prices and reducing its costs, chief financial officer Joshua Jepsen said. Tariffs also are expected to contribute to lower demand for tractors and other farm equipment produced by Deere. Large agricultural equipment sales across the industry are projected to fall by 30pc in the US and Canada in 2025 due to trade uncertainty and high interest rates, Deere said. Deere domestically produces 79pc of the completed goods it sells in the US, and 76pc of the components used at its domestic facilities are sourced from US-based suppliers. The company is prepared to invest $20bn to expand its domestic manufacturing over the next decade, chief executive John May said. The company imports 10pc of the components used in its US plants from Mexico and has begun qualifying its products for exemptions under the US-Mexico-Canada free trade agreement (USMCA) to mitigate the impact of tariffs. US sales of the company's roadbuilding machinery are subject to the US' 10pc global import tariff rate, as the equipment is predominantly made in Germany. The company reduced the low end of its profit forecast for the fiscal year to $4.75bn-$5.5bn, down from $5bn-$5.5bn. John Deere's second-quarter profit fell to $1.8bn, down by 24pc compared with the year-prior period. By Jenna Baer Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more