Generic Hero BannerGeneric Hero Banner
Latest market news

EVs to account for 79pc of lithium demand by 2030

  • Market: Metals
  • 27/08/20

Demand for lithium is expected to surge over the next decade, owing largely to the evolution of the electric vehicles (EVs) market, according to Chile's state mining agency, Cochilco.

This year, demand for lithium has been subdued as the Covid-19 pandemic dented consumption across the globe, Cochilco said yesterday. But the agency expects demand to recover over the next few years and anticipates that combined demand for the metal will be at 1.79mn t/yr by 2030, as compared with 317,000t today — most of which will come from the EVs market.

EVs at present account for 75,000 t/yr of lithium demand, or roughly 24pc of total global demand, Cochilco said. But it expects this figure to rise to 1.42mn t/yr by 2030, or 79pc of total demand, based on forecasts for the growing production of hybrid, fully electric and other vehicles that use lithium-ion batteries. The remainder of future demand will come largely from electronics, energy storage and gadgets such as e-bikes.

EV uptake has grown this year, making up 6.8pc of car sales in Europe in the first quarter, compared with just 2.5pc a year earlier. But the automotive market as a whole has taken a battering from Covid-19 pandemic, with sales falling across the board. But the pandemic remains a short-term risk to growth, Cochilco said, showcased by the fact that Chinese demand has started to pick up, with sales of new energy vehicles growing in July, the first month this year in which they have risen.

Many automakers elsewhere are pushing further into electrification, with Germany's Daimler having entered a partnership with Chinese battery cell producer Farasis Energy earlier this year, BMW signing a long term deal with Swedish battery maker Northvolt and Tesla announcing it will build a 30GWh factory in Texas.

But there are medium- and long-term risks relating to lithium consumption, Cochilco said. These include variations in electric car subsidies, lower taxes on combustion engine cars, lower oil prices and the increasing availability of substitutes such as potassium-ion batteries and hydrogen.

The matter of lithium availability, however, is not in question. Last week, Chile's SQM — the world's second-largest lithium producer behind Albemarle — said it is looking to increase production of the metal over the next five years in order to boost its share of the total market. The two firms already account for 40pc of the total, but SQM aims to sell 150,000t of lithium by 2025, up from the 70,000t it is projecting for this year.

SQM's decision contrasts with that of its competitors, all of which have sought to slow production in light of falling demand and prices. In January, prices for minimum 99.5pc lithium carbonate averaged $9/kg cif China but they have since fallen, with Argus' most recent assessment, on 25 August, putting prices at $6.50-8.00/kg.

In terms of output by country, Cochilco anticipates that Australia and Chile — the two largest producers of lithium — will reduce their global market shares, while the US, Canada and Zimbabwe will increase their levels of production by tenfold. Australia's 48pc share last year would fall to 31pc in 2030, while Chile's would drop to 17pc from its current 29pc.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
19/06/25

ArcelorMittal halts DRI-EAF projects in the EU

ArcelorMittal halts DRI-EAF projects in the EU

London, 19 June (Argus) — Luxembourg-based steelmaker ArcelorMittal said it will not proceed with previously announced direct-reduced iron (DRI) and electric arc furnace (EAF) decarbonisation projects at Bremen and Eisenhuttenstadt in Germany, citing the unfavourable policy and market environment. The company initially planned to supply DRI from Bremen to the EAF in Eisenhuttenstadt after their construction. But in November last year, the company said it was unable to take final investment decisions on building the DRI-EAF assets in the EU because of challenging energy, policy and market environments that were not moving in a favourable direction. ArcelorMittal this week announced that it will carry out repair works on blast furnace 5A at its Eisenhuttenstadt site next week until 28 June, similar to the repairs last year. The blast furnace has capacity of 2.5mn t/yr. The company has urged the EU to accelerate enforcement of the carbon border adjustment mechanism (CBAM), strengthen trade protections and implement the EU Metals Action Plan to restore the competitiveness of low-emissions steel. In May, ArcelorMittal confirmed its intention to invest €1.2bn in a new EAF at its Dunkirk site in France. Market participants suggest the company was delaying its DRI investments in Ghent, Belgium, and Dunkirk, but the steelmaker has yet to comment. The French government in 2023 approved an €850mn grant to ArcelorMittal to decarbonise its Dunkirk asset. By Elif Eyuboglu Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Nationalisation may prop up surplus steel: Worldsteel


19/06/25
News
19/06/25

Nationalisation may prop up surplus steel: Worldsteel

New York, 19 June (Argus) — Redundant steelmaking capacity is unlikely to be reduced by decarbonisation and market forces, given global fragmentation and the focus on resilient supply chains, Edwin Basson, director general of international industry organisation Worldsteel, told Argus this week. "If you asked me five years ago, I would have said I suspect decarbonisation and market forces would have led to reductions in redundant capacities, but the few recent examples we've seen of nationalisation or re-nationalisation, quasi-nationalisation, will most likely see countries try to retain steelmaking capacity," Basson said on the sidelines of the Global Steel Dynamics Forum in New York. There are several instances of governments becoming involved in the operation of troubled mills in Europe and the UK. Basson said the industry's future direction depends on three main forces — environmental, employment and economic efficiency. In previous decades, economic efficiency was the main driver, allowing inefficient capacity to close or be modified. But the zeitgeist of reshoring, re-regionalisation and focus on employment has challenged this force, also contributing to the continued operation of surplus capacity that is not necessarily required by the market. "The strength of this efficiency force has reduced the labour and the environmental force is receiving more prominence at the moment. The moment you put a national interest filter on top of all of this, then the efficiency force becomes of minimal importance," he said. And there is limited room to consolidate producers in developed markets, such as the US and EU, given competition concerns, which also dampens cross-border consolidation to some extent. There is scope for consolidation in China, which is still behind the targets set by the government in the previous five-year plan — of 60pc of capacity being consolidated — and in smaller developing economies, shrinking the long tail of smaller producers. Worldsteel forecasts that half of all steel will still be made in blast furnaces in about 20 years from now, despite the current focus on decarbonisation. There is insufficient scrap in the world for the whole industry to move away from blast furnaces and insufficient high-quality direct-reduced iron feed, Basson said. In the EU, where decarbonisation is perhaps the most pressing issue as mills face mounting carbon taxes, the energy challenge is of particular significance. "There is a reason that Scandinavia is, at least in the EU, the home of very progressive decarbonisation producers," he said. "They have access to high-quality materials, direct-reduced iron and so forth, and access to high-quality sustainable energy that is not carbon-based. It's a very different story in other parts of northern Europe, where energy is a key question, and a different question again in the south, where it's energy and access to raw materials." "There will be multiple pathways to decarbonise, depending on location, and Europe may soften its policies to enable existing production routes to remain a force for a number of years longer," he said. Exponential breakthrough technologies related to the blast furnace could see emissions fall to a similar level as the gas-fed direct-reduced iron/electric arc furnace of 1.3-1.4t of carbon per tonne of steel. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

India's new steel input quality rule to curb imports


19/06/25
News
19/06/25

India's new steel input quality rule to curb imports

Mumbai, 19 June (Argus) — India's ministry of steel has issued an order stating raw materials used in imported finished steel products should meet Indian quality standards. This is likely to restrict imports, resulting in shortages of specialty steel products used by the automotive industry and other consumers, industry participants said. The order, issued on 13 June, will now require semi-finished products such as slab, billets and ingots to comply with Indian standards, even if the finished steel product already has a Bureau of Indian Standard (BIS) certification. If an overseas supplier has a BIS permit for IS 2062 grade hot-rolled coil, it will also need a similar certification for IS 14650-grade slab. For downstream products such as hot-dip galvanised steel, the input materials would constitute hot-rolled and cold-rolled sheets and strips, which would also need BIS certification, along with semi-finished products. Earlier exporters only needed BIS compliance for the final steel product and not the input material. The original quality control order covered 151 steel products. Steel consumers concerned A provisional 12pc safeguard duty implemented from 21 April has slowed imports of certain flat steel products. The new quality control rule, referred to by some industry participants as an additional "barrier" for imports, is applicable to imports with a bill of lading on or after 16 June. It has stoked concerns among micro, small and medium enterprises (MSMEs) that consume overseas steel not made in India, market participants said. The order "has triggered fears of massive losses and plant closures among MSMEs that rely on imported semi-finished steel," according to a report by think-tank the Global Trade Research Initiative (GTRI). "Many have already paid for shipments now deemed non-compliant," the report said. The automotive industry is likely to face production hurdles. Japan has been supplying a lot of specialty steel, which is not manufactured in India, to the Indian automotive industry, sources said. An automotive end-user said they were in talks with the government and declined to comment on the new order. "Steel users across India are shocked," an international steel trader said. In certain cases such as cold-rolled non-oriented steel, a type of electrical steel used in motors, the raw materials such as cold-rolled full hard steel (CRFH) or hot-rolled coil (HRC) may have BIS licence but inputs used to make CRFH or HRC may not meet Indian standards, the trader added. There is already a shortfall of certain speciality steel grades in India. Only about 12pc of the required 400,000t of cold-rolled grain-oriented steel (CRGO) was produced domestically in April 2023-March 2024, according to GTRI. The remaining volumes were imported from overseas suppliers such as China, Japan, Russia, and South Korea. India launched a new production-linked incentive scheme for speciality steel products this year, with less criteria for investment than the previous version. The new steel input quality rule is clearly in line with the government's "Make in India" initiative, a Mumbai-based trader said. It will now be difficult to get imports purchased in recent weeks by steel consumers, another Mumbai-based trading company said, adding that market conditions are tilting in favor of domestic producers. The new order is also expected to weigh on imports of plate from South Korean producers which do not have a BIS for certain input materials, the trader said. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Syrah restarts graphite production at Mozambique mine


19/06/25
News
19/06/25

Syrah restarts graphite production at Mozambique mine

Sydney, 19 June (Argus) — Australian minerals producer Syrah Resources has resumed graphite production at its 350,000 t/yr Balama mine in Mozambique and will restart large-volume shipments in September-December, following months of disruptions owing to protests. Syrah declared a force majeure on sales from Balama in December because of protests at the site, and this remains active, the company said today. But it has restarted production and intends to ramp up output at the mine to restock inventories for shipments in September-December, Syrah said. Its graphite exports in September-December will be shipped to customers outside China. The company is aiming to have a greater presence in ex-China markets and to increase sales from Balama this year, Syrah chairman Jim Askew told investors on 23 May. Syrah sold around 1,300t of natural graphite in January-March, using existing inventories. But the company failed to meet some sales obligations over the quarter. Non-violent protesters blocked access to Balama in September, citing farming resettlement grievances. The demonstrations worsened in October, after Mozambique's disputed general election triggered major protests across the country. Most protesters left the mine in April, after reaching a deal with Syrah, the company said last month —although some remaining demonstrators had to be removed by Mozambique authorities a month later. Syrah regained access to Balama on 3-4 May. Balama's operating infrastructure has not been impacted by the protests and is in good condition, Askew said in late May. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

US Fed sees 2 rate cuts in '25, eyes tariffs: Update


18/06/25
News
18/06/25

US Fed sees 2 rate cuts in '25, eyes tariffs: Update

Adds Powell comments, economic backdrop. Houston, 18 June (Argus) — US Federal Reserve policymakers kept the target interest rate unchanged today and signaled two quarter-point cuts are still likely this year while downgrading forecasts for the US economy in the face of largely tariff-driven uncertainty. The Fed's Federal Open Market Committee (FOMC) held the federal funds rate unchanged at 4.25-4.50pc, in the fourth meeting of 2025. This followed rate cuts of 100 basis points over the last three meetings of 2024, which lowered the target rate from more than two-decade highs. In the Fed's first release of updated economic projections since President Donald Trump's 2 April "Liberation Day" announcement of far-ranging tariffs, policymakers continued to pencil in two quarter-point rate cuts for the remainder of the year. "Changes to trade, immigration, fiscal and regulatory policies continue to evolve and their effects on the economy remain uncertain," Fed chair Jerome Powell told reporters after the meeting. "Today, the amount of the tariff effects — the size of the tariff effects, their duration and the time it will take, are all highly uncertain. So that is why we think the appropriate thing to do is to hold where we are as we learn more." Policymakers and Fed officials Wednesday lowered their median estimate for GDP growth this year to 1.4pc from a prior estimate of 1.7pc in the March economic outlook. They see inflation rising to a median 3pc for 2025 from the prior estimate of 2.7pc, with unemployment rising to 4.5pc from 4.4pc in the prior forecast. Economists have warned that Trump's erratic use of tariffs and plans to raise the national debt, along with mounting geopolitical risk highlighted by the latest Israel-Iran clashes, threaten to throw the economy into a recession or marked slowdown. Consumer confidence has tumbled and financial markets have been volatile while the dollar has slumped to three-year lows. Still, the labor market and inflation — the two pillars of the Fed's policy mandate — have remained relatively stable into the fifth month of Trump's administration. "As long as the economy is solid, as long as we're seeing the kind of labor market that we have and reasonably decent growth, and inflation moving down, we feel like the right thing to do is to be where we are, where our policy stance is and learn more," Powell said. US job growth slowed to 139,000 in May, near the average gain of 149,000 over the prior 12 months and unemployment has remained in a range of 4-4.2pc since May 2024. Consumer inflation was at an annual 2.4pc in May, down from 3pc in January. US GDP growth contracted by an annual 0.2pc in the first quarter, largely due to an increase in imports on pre-tariff stockpiling, down from 2.4pc in the fourth quarter and the lowest in three years. "What we're waiting for to reduce rates is to understand what will happen with the tariff inflation," Powell said. "And there's a lot of uncertainty about that. Every forecaster you can name who is a professional is forecasting a meaningful increase in inflation in coming months from tariffs because someone has to pay for the tariffs." Before Wednesday's FOMC announcement, Trump made a rambling attack on the Fed's policy under Powell, in remarks to reporters at the White House. "I call him 'too late Powell', because he's always too late" in lowering rates. "Am I allowed to appoint myself at the Fed? I do a much better job than these people." Powell's term in office as Fed chair expires in May 2026. Powell declined to directly address Trump's comments. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more