China rare earth ore imports unaffected by Burma crisis

  • Market: Metals
  • 01/02/21

China's imports of rare earth ores are so far unaffected by the political crisis in Myanmar (Burma) as there have been no disruptions to rare earth mining activity and transport services in the country, Chinese market participants said.

Mining firms in Myanmar are operating at regular run rates and Chinese rare earth separation plants are able to secure ore feedstock imports for medium and heavy rare earth production as normal, indicating there is no impact yet from the political crisis, market participants said.

China has been heavily dependent on rare earth ore imports from Myanmar in recent years, which account for more than 60pc of the northeast Asian country's total ion-absorption rare earth consumption.

Chinese imports of rare earth ores from Myanmar have been increasing significantly over the past few years as China has imposed strict measures to crack down on illegal mining activity and trading in the country since 2017. Annual mining quotas for ion-absorption rare earths issued by the Chinese government are also insufficient to meet rising downstream demand from medium and heavy rare earth production, following rapid developments in the magnet manufacturing industry.

Combined imports from Myanmar, including shipments of rare earth oxide (HS code 28469019), carbonate ores (HS code 28469048) and compounds of rare earth metals (HS code 28469099), rose by 23pc from 2019 to 35,539t last year, with rare earth oxide alone making up around 21,519t.

China imported 6,225t of rare earth carbonate ores from Myanmar last year, down by 52pc from 13,079t a year earlier. Imports from Myanmar fell by 92pc on the year to 173t in December.

Chinese imports of rare earth oxide ores from Myanmar rose by 21pc from a year earlier to 17,512t in 2020, supported by a 22pc year-on-year increase in December deliveries to 1,567t.

Imports of compounds of rare earth metals from Myanmar rose by more than eight times from a year earlier to 11,801t in 2020, while December deliveries increased sixfold from 149t a year earlier to 1,110t.

China's annual mining quotas for ion-absorption rare earths have been maintained at 19,150t since 2018, after rising from 17,900t in 2017. Market participants expect limited reserves of ion-absorption ore in China and strict environmental protection measures to keep ion-absorption mining quotas from rising in the next few years, which will prompt more medium and heavy rare earth plants to increase use of imported ore feedstock.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
25/06/24

Iron ore beneficiation key for India’s steelmaking goal

Iron ore beneficiation key for India’s steelmaking goal

Mumbai, 25 June (Argus) — The Indian steel industry should sharpen its focus on iron ore beneficiation as demand for the raw material rises with heightened steelmaking capacity and the push towards decarbonisation gathers pace, industry experts said. Beneficiation — a process that increases ore's iron content and removes impurities such as alumina — is the "need of the hour" as Indian steelmakers ramp up production to meet the government's target of 300mn t of crude steel capacity by 2030, several company executives said at an industry event last week. India is the fourth-largest iron ore producer in the world, with output reaching a record high of 277mn t in the 2023-24 fiscal year. But the country exported about 48mn t of lower-grade iron ore — with Fe content below 58pc — particularly to China, experts said at a conference by Metalogic PMS in Vishakhapatnam city. Increasing the ore's quality could improve hot metal output, bring down production costs and ensure domestic raw materials security to meet increasing requirements for steelmaking. Steel consumption in India is expected to increase by 9-10pc in 2024-25 because of higher infrastructure funding by the government, according to Icra. Major steelmakers such as JSW Steel have been investing aggressively in expanding production capacity this year. About 150mn t of beneficiation plant capacity is currently available in India and only 40-42pc is being utilised, some industry executives highlighted at the conference. Iron ore beneficiation has lagged in India because of challenges such as the area required for tailings and transportation costs, state-controlled mining firm NMDC technical director Vinay Kumar said. Tailings refer to the waste generated by the beneficiation process. Constructing more slurry pipelines would reduce logistics expenses, Kumar added. NMDC has a target of 100mn t/yr of iron ore production capacity by 2030. A step towards net zero Higher-grade iron ore would limit carbon emissions during the steelmaking process, helping India achieve its net zero emissions target by 2070, experts said. India's steel ministry has been exploring alternative ways of steelmaking over traditional blast furnaces, and in June invited proposals for pilot projects to produce direct-reduced iron (DRI) using hydrogen. DRI can be used in electric arc furnaces (EAF) to produce low-carbon steel, but that requires iron ore with Fe content of 67pc or above, according to the Institute for Energy Economics and Financial Analysis (Ieefa). "There is a lot of aspiration to go green in steelmaking. That's why the DRI-EAF route is being preferred because the CO2 emission is lower there," Lloyds Metals and Energy director of steelmaking Priya Ranjan Prasad said. The vertical shaft DRI process needs high-purity pellets and "demand is much more than what is being produced right now", he added. "The only route is we beneficiate, take the Fe levels beyond 66-67pc and produce pellets that can be charged to DRI furnaces." By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

Itochu, ESA to produce direct reduced iron in Abu Dhabi


25/06/24
News
25/06/24

Itochu, ESA to produce direct reduced iron in Abu Dhabi

Tokyo, 25 June (Argus) — Japanese trading house Itochu and UAE's largest steel producer Emirates Steel Arkan (ESA) will start producing 2.5mn t/yr of direct reduced iron (DRI) in Abu Dhabi after 2027. Itochu and ESA initially planned to start DRI production in the second half of the April 2025-March 2026 fiscal year. But "the project was delayed", Itochu said without disclosing the reason. The DRI will be produced with iron ore from Brazilian steelmaker CSN's subsidiary, the Itochu representative added, but did not disclose the iron ore volume. The firms will supply the produced DRI — a low-carbon steelmaking material — to Japanese producer JFE Steel, an Itochu representative told Argus today. The volume of the DRI delivery to JFE was not disclosed, but it would be enough for JFE to produce around 50pc of total ferrous output at its new facility, according to Itochu. JFE plans to produce 2mn t/yr of ferrous products at its upcoming electric arc furnace plant from 2027, which will be located in western Japan's Kurashiki city. Japan's state-owned export credit agency Nexi might insure the project, after the agency signed an initial agreement with Itochu and CSN on 7 May to co-operate on decarbonising the steel industry. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Brazil's HRC prices to rise further by July


24/06/24
News
24/06/24

Brazil's HRC prices to rise further by July

Sao Paulo, 24 June (Argus) — Brazilian prices for hot-rolled coil (HRC) are expected to increase further in July — following increases in June — as domestic producers are betting on higher domestic demand along with lower offers for the type of steel. Brazilian HRC prices are at around $790/t fob, market sources told Argus , with some producers offering about $800/t. That compares with around $730/t last month, sources said. This upward swing is being heavily driven by new tariffs on imported steel , a measure taken by the government aiming to protect domestic producers against unfair competition with cheaper imports, chiefly from China. Brazil imported a little under 430,000 metric tonnes (t) of HRC in 2023 — over three times the 133,000t from 2022 — 62pc of which originated in China, according to customs data compiled by Global Trade Tracker. Brazil is on track to import over 480,000t in 2024 based on the latest import statistics through May. Some producers have told clients that prices would rise by July. Brazilian steelmaker Companhia Siderurgica Nacional (CSN) warned that HRC prices would rise by 7.5pc, while Gerdau would increase it by 8pc, sources familiar with the matter told Argus . CSN and Gerdau declined to comment. Domestic producers are also prioritizing slab production over HRC as export demand for the semi-finished grade has heated up, sources said. Brazil exported 445,800t of slab, a 10.4pc increase from April, according to customs data. Still, some other sources were skeptical that the market would accept such a rise, saying that key consumers are supplied with enough steel for the coming months, leading them to reject increases more broadly. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Industria mexicana se enfrenta a un peso más débil


24/06/24
News
24/06/24

Industria mexicana se enfrenta a un peso más débil

Mexico City, 24 June (Argus) — La depreciación del peso mexicano después de las elecciones ha afectado al comercio e inversión en energía, con un dólar estadounidense más caro elevando el precio de las importaciones de combustible y gas natural. El peso perdió aproximadamente 11pc de su valor frente al dólar estadounidense a medida que los mercados reaccionaron a la abrumadora victoria electoral del partido en el poder Morena en las elecciones del 2 de junio. El tipo de cambio saltó de Ps16.65/$1 solo una semana antes de la votación a un pico de Ps18.99/$1 en los días siguientes. Desde entonces, la tasa se ha estabilizado en Ps18.30-Ps18.50/$1 en los últimos días. "El nuevo umbral para el tipo de cambio probablemente será de Ps18 por dólar", afirmó Gabriela Soni, directora de inversiones de UBS Asesores México. Añadió que, aunque el movimiento ha sido abrupto, "creemos que está justificado dada la aprobación esperada de las reformas constitucionales que tienen el potencial de erosionar el sistema de división de poderes y afectar a las decisiones de inversión en el país." Soni se refirió a la consolidación histórica del poder político asegurado por Morena y los partidos aliados en las elecciones que les entregó no solo la presidencia, como se esperaba, sino el control de 27 de las 32 gubernaturas estatales, y solo a unos pocos escaños en el senado de obtener mayorías calificadas en ambas cámaras del congreso. Con los resultados, el camino está muy claro para que el presidente Andrés Manuel López Obrador apruebe las controvertidas reformas judiciales durante su último mes en el poder en septiembre. Esto podría significar la eliminación de las reformas energéticas promercado aprobadas en 2014, la disolución de los reguladores del sector energético de México y el endurecimiento de la visión estatista de López Obrador de un sector energético dominado por la empresa estatal de petróleo y gas Pemex y la empresa de electricidad CFE. El tipo de cambio podría bajar aún más en los próximos meses si la economía se mantiene estable, dijo Pedro López, director adjunto de análisis económico de Banco BASE, un banco especializado mexicano que apoya a las empresas internacionales con operaciones en el país. Dicho esto, el tipo de cambio frente al dólar estadounidense "continuará estando sometido a presiones más elevadas estos meses hasta las elecciones presidenciales de EE. UU. en noviembre", dijo López. López dijo que el mercado debería tener una imagen más clara de México para finales de año, después de las elecciones estadounidenses y con mayor claridad después de la próxima sesión legislativa mexicana. Añadió que las presiones inflacionistas derivadas del aumento del tipo de cambio probablemente llevarían al banco central a mantener la tasa de interés de referencia en 11pc, manteniendo tasas de interés altas en México. Estas, a su vez, atraen a los inversionistas globales de nuevo al peso bajo la dinámica actual de tasas, suponiendo que no haya perturbaciones adicionales. Balance de energía Dado que México es un importador neto de energía desde 2015, "una depreciación del peso mexicano tiende a empeorar el balance del petróleo", afirmó Soni. "Sin embargo, México es un exportador neto en sectores no energéticos, especialmente en la fabricación, y la balanza comercial se beneficiaría en estos sectores." Y aunque el tipo de cambio puede ayudar a México a ganar más dinero por las exportaciones de petróleo, "tenemos que recordar que son cada vez menos", dijo Víctor Herrera, jefe de estudios económicos del Instituto Mexicano de Ejecutivos Financieros (IMEF). Pemex está redirigiendo el petróleo hacia sus refinerías, bajo el mandato del presidente para aumentar la producción nacional de combustible. Como resultado, las exportaciones de petróleo crudo mexicano cayeron 31pc año con año en abril a 618,000 b/d. A pesar de los esfuerzos, los productos refinados importados de EE. UU. siguen representando aproximadamente 72pc de su consumo nacional de gasolina, diésel, gas natural y turbosina, según los datos de la secretaria de energía. Se necesitará tiempo para saber qué beneficios, si los hubiera, aportan las ventas de petroleo de Pemex al extranjero, que se traducen en pesos adicionales, afirmó Herrera. Mientras tanto, añadió: "pagaremos dólares más caros para importar gasolina." Por James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Q&A: New DLE method seeks to access US lithium reserves


24/06/24
News
24/06/24

Q&A: New DLE method seeks to access US lithium reserves

London, 24 June (Argus) — Direct lithium extraction (DLE) technology has been around for a few years now, but several methods exist and are mine-specific. US-based Iliad technologies is attempting to find a universal method by which to extract lithium and export this technology to an increasingly diversified global lithium market. Argus spoke with Iliad chief executive Samuel Moore. Edited highlights follow: How does Iliad's DLE technology work? It is born out of Energy Source Minerals, which is a company that is developing a project in California on the Salton Sea. The genius of Iliad was really the need for technology that worked at high temperatures and could deal with the fluids coming up from the Salton Sea, and we decided there was not really anything on the market that was right for our project. It is based on absorption desorption, which is one of the longer-standing methods of DLE that I know of. It has been used for 30-plus years and in Argentina. What happens is that the lithium-bearing brine enters the system. The kinetics of the brine push the lithium into an absorbent material that is designed to capture the lithium and ignore everything else. It is almost the reverse of a filter. Everything else washes through the system and is injected back into the ground. Then we wash the lithium out of that absorbent material using just water. So we do not use any reagents, we do not use any acid, and we do not use any other harmful materials. It is a very clean system. We run a continuous process and smaller columns with a very clever valve that basically pumps the fluid through 30 different columns of absorbent. We work the absorbent continuously to take a stream of lithium chloride out of the back end. It means we use a lot less absorbent and a lot less water. Does Iliad technology work in different forms of brine, different from the geothermal brines in the Salton Sea? One of the myths of DLE is that you need a different solution for different clients. We do not think this is true. We have tested on more than 30 different lines. We have tested geothermal obviously, but we have tested salars [large brine fields] and in Smackover [lithium mining area in the US]. We have tested waters that come up with oil and gas. In different countries, we have a lot of data now and Iliad works universally with all of them. I don't think it is true to say that each different project requires a different technology. Our flavour of absorption desorption is very effective. We have tested brines with lithium of as low as 40 parts per million (ppm) and as high as up into the thousands. It works at both of these readings and at everything in between. We are really confident and comfortable that there are technologies out there that have universal application, and we are going to be one of those. Who could make use of this technology, and in what areas of the lithium sector? Our modern take on DLE unlocks resources that couldn't really be developed before. The traditional way to develop brine field lithium was with evaporation ponds in South America, but you get very large losses. You only get 40-50pc recovery when you do that, it takes a long time and the product quality is not there. So DLE allows a step change in performance than what is currently in the the industry and targets resources that are not really able to be targeted today. If you come back to the US, say the Smackover formation, you may get to process 204ppm of lithium. South America has 600ppm-plus of lithium, so DLE gets you lower. Then you get into the conversation around the geopolitics. Do I want to establish a lithium supply chain in the US, Europe and Canada — places that traditionally have not had one? I think DLE is going to be key to unlocking the domestic supply chain that the US government has clearly signalled is very important to it. We raised independent capital from Livent, now Arcadium Lithium. It was our cornerstone investor throughout that process. So it has taken a shareholding early, which is really interesting because it is the one industry participant that has done DLE for 30 years in Argentina already. How do lithium producers use DLE to reduce their impact on the environment? This will be the cleanest lithium you can produce — no question. Take our first project, for example. We are attached to the side of a geothermal power station. We capture the brine, so it comes to us hot. We capture the lithium using our method. Once the lithium has been removed, it goes back down the hole, in the same way that it does today. We use steam from the power station, and we use heat from the brine to do a lot of the processing. We use water to capture the lithium out of the absorbent material. We have no reagents and no harsh chemicals. [It is a] very low energy requirement. Compare this to hard rock mining, where you have a very large carbon footprint, a massive land footprint and then a huge amount of chemical use and the processing of that ore. You do not have evaporation ponds — once again, these leave a very large land footprint and incur very large water losses because you are evaporating the brine to the atmosphere to capture the salts left behind. So I mean, DLE — particularly really efficient DLE, like Iliad absorption desorption — will be the cleanest lithium you can get. By Thomas Kavanagh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more