Italian ferrous scrap prices under increased pressure
Domestic ferrous scrap prices in Italy may fall in the coming months as support from the country's energy crisis aid package may be cancelled out by significantly reduced steel demand.
The financial authorities in early October approved the details for a support package for energy intensive industries. The package has allowed Italian steelmakers to resume steel production, which consequently boosted ferrous scrap demand earlier this month.
But a sustained fall in steel prices since mid-September and thin order books for November-December deliveries drove some Italian mills to trim, or even halt, output in the final two months of this year.
The Argus hot-rolled coil (HRC) ex-works Italy assessment was €675.50/t on 21 October, down by €77/t on the month. The Italian long products market in October has been also characterised by slow demand and slipping prices, with the Argus rebar ex-works Italy assessment down by €110/t month on month to €840/t on 19 October.
Increased uncertainty on finished steel demand in the next two months and expectations of lower steel output led some Italian mills to cut ferrous scrap purchases last week, market participants said. These mills, and other mills that did not reduce scrap buying, kept bids unchanged last week, but they may start cutting prices in November. Argus assessed the monthly delivered-to-mill price for E8 new ferrous scrap in Italy at €340–350/t in October, up by €5/t on the month. The assessment for E3 old scrap was €12.50/t higher on September at €320–330/t, while the E40 shred assessment rose by €15/t to €340–350/t delivered-to-mill levels this month.
Lower prices in the Turkish import market, a bellwether for seaborne trades, also weighed on Italian prices. The Argus daily assessment for HMS 1/2 80:20 cfr Turkey was $360/t today, down by $11/t from 14 October, when the Italian delivered-to-mill assessments were last assessed.
In addition, higher scrap availability resulting from lower steel output from Italy's neighbouring countries such as Switzerland may also weigh on sentiment. Italy competes for imported scrap from Germany with its neighbouring countries.
Some traders suggest that scrap prices in Italy may fall by €50-60/t from the current levels in November-December, although some others were less bearish.
"We don't see any fall in scrap demand from our customers," a scrap supplier said. "Of course, sales are moderate-to-slow. But we estimate the [November-December] Italian scrap market [to perform] better than it did in late September."
In January–September, Italy produced around 16.5mn t of steel, 11pc down on the year. Production totalled 1.9mn t in September, down by 19pc on the year, Italian steel association Federacciai said.
Related news posts
UK decoiler Atlantic Steel enters administration
UK decoiler Atlantic Steel enters administration
London, 3 May (Argus) — Birkenhead-based decoiler Atlantic Steel filed for administration yesterday, according to a filing seen by Argus . The company has been under pressure since its previous owners took a large chunk of cash out of the business as part of a management buyout in 2022. Credit insurers began to pull cover on the business towards the end of last year, and suppliers have been calling retention of title, which protects suppliers in the event of insolvency or bankruptcy, in recent days. Sources suggest the debt of the business at the time of administration is around £18mn. The previous owners are preferential creditors after the banks, as they were due another £5mn from the business, according to Companies House filings. Market sources suggest it is likely the business will be bought out of administration, with other service centres interested in the assets — the lease on the site expires in the next few years but is extendable, and Atlantic operates the largest decoiler in the UK, capable of decoiling over 2.5m wide. It is also situated on the dock at Birkenhead, which cuts inland transportation costs. The UK HRC market has been under pressure for a number of months, in line with the struggles seen in Europe. Argus ' weekly assessment was £605/t ddp West Midlands on 2 May, down from a recent peak of £700/t at the start of February. The assessment reached an all-time high of £1,200/t on 31 March 2022, and the management buyout took place later that year. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Italian flat steel trading at premium on low supply
Italian flat steel trading at premium on low supply
London, 3 May (Argus) — Italian coil prices are trading at an atypical premium to northwest EU prices, especially for downstream products such as cold-rolled coil (CRC) and hot-dipped galvanised (HDG) coil. Multiple factors are playing into the current trend, which several producers say is unlikely to be sustainable given higher costs for northwestern mills — most notably, the comparatively brighter economic picture in southern Europe compared with the north, and lower steel output in Italy. Germany manufacturing PMI data has been consistently below Italian levels since August 2022, and registered its last monthly growth nearly two years ago in June 2022. Italian manufacturing has expanded in five months over the same period, registering its last increase in March 2024. In recent years, German manufacturers have been buffeted by the loss of cheap Russian energy, a reduction in demand from key export markets, most notably China, as well as the lack of investment in infrastructure and political difficulties. And yet, German hot-rolled coil (HRC) output increased by 5pc year on year in the first quarter of this year, partially driven by mill restocking, while Italian output slumped by just over 9pc in the same period. Naturally, Acciaierie d'Italia halting furnaces and producing with just one asset of 1 mn t/yr capacity plays a role in the lower overall output, but it has also been running just one rolling line at low capacity. Novi Ligure has nearly stopped, and producing depending on if stocks of raw material match customer enquiry. Financially troubled re-roller Liberty Magona has also produced intermittently and at low levels as it has struggled to obtain letters of credit, and thus only produced when able to buy HRC by paying in advance, or financed by third-parties. Producer Arvedi has taken the decision to drastically reduce or even stop offering CRC over the past year, on its inability to compete with Asian import pricing. CRC is the only major flat steel product to have not been hit by dumping duties in recent years, and weak demand in Asia saw a shift of regional mills to the EU market. Ample quota availability for CRC also meant that safeguards were not a factor, unlike for HDG. Arvedi has continued supplying HDG, and is currently one of two constant Italian suppliers of the material. The only regular supplier of both downstream products has become re-roller Marcegaglia. Again, the mill has mostly been selling CRC for very prompt delivery enquiries, unable to compete with Japanese, Korean and Indian import CRC, which have become the reference. Despite the lower volumes of CRC the producer has been selling, it has tried to maintain the historical €10-20/t differential between CRC and HDG offers, with varying success over the past months. The uncertainty of the HRC import duty on "other countries" material has likely made the producer, which relies heavily on imported coils and is one of the largest spot buyers in the world, less clear on the discounts it can provide given the varied duty it has had to pay in recent quarters. Sales opportunities in central and east Europe over the past months have also aided its order books. Transportation costs, slim margins and regional competition, as well as weak fundamentals, have kept north EU mills more focused on closer-by markets. While some sellers have been present in Italy with both CRC and HDG, they have not been undercutting Italian producers. In addition, demand for HDG has been relatively stable, while stringent safeguard quotas have not allowed Italian prices to fall under pressure from imports. EU car registrations in the first quarter were up by 4.4pc year on year, and although both Germany and Italy posted growth, the German increase was below the average rate for the bloc, while Italy was up by 5.7pc. Clearly, EU producers have offloaded some volumes of both CRC and HDG in the export markets this year, with exports of the products rising dramatically in January-February. The majority of those volumes have come from northwest EU suppliers. Of late, rising import prices have also helped southern mills more, given the quicker impact imports have on domestic prices in the south. By Lora Stoyanova and Colin Richardson HDG CRC spreads $/t Germany and Italy manufacturing PMI Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Australia's WesCEF to pursue Li plans despite hurdles
Australia's WesCEF to pursue Li plans despite hurdles
Singapore, 3 May (Argus) — Australian conglomerate Wesfarmers will still pursue the strategy for its chemicals, energy and fertilisers arm (WesCEF) to be an integrated lithium producer, despite the recent lithium market downturn. Wesfarmers earlier this year warned of unprofitable lithium sales from its Mount Holland project , owing to high production costs as it goes through a ramp-up. But WesCEF plans to weather through the downturn and plow ahead with its lithium downstream developments, given strong long-term fundamentals and despite the market's immaturity and cyclical demand, according to the group's executives on 2 May. Spodumene prices in China — which dominates global consumption of lithium raw materials — were assessed at $1,080-1,180/t on 30 April, down sharply from $5,750-5,900/t at the start of 2023. "It's also worth remembering that when we invested in Covalent and took the final investment decision , lithium hydroxide prices were lower than they are today," said WesCEF's managing director Ian Hansen. Wesfarmers and Chilean lithium firm SQM jointly own Australian firm Covalent Lithium, which looks after the Mount Holland project that includes a mine, concentrator and its 50,000 t/yr Kwinana lithium hydroxide refinery. Completing the refinery's construction and commissioning remains WesCEF's priority, with the mine and concentrator going through a ramp-up, according to WesCEF. The firm is also progressing its potential expansion project for the mine and concentrator, which it submitted an application for environmental approvals. The first lithium hydroxide output out of the Kwinana refinery is still expected in the first half of 2025, with a delay in timeline. Covalent completed its first spodumene concentrate shipment earlier in March, said WesCEF. Wesfarmers expected its share of spodumene concentrate output from Mount Holland to be 50,000t in the current July 2023-June 2024 fiscal year. The share will rise to 150,000-190,000t in the upcoming July 2024-June 2025 fiscal year. Lithium downturn The lithium downturn has led to multiple firms, including major particpants across the lithium and battery supply chain, reporting poor January-March results. Australian lithium and nickel producer IGO, affected by slumps in the lithium and nickel markets, reported its first quarterly loss in years while posting lower output . Major US lithium producer Albemarle's executives have also called the market "unsustainable" in the long run, as it posts a whopping $1.1bn year-on-year fall in sales from its energy storage division. Major Chinese lithium producer Tianqi Lithium also suffered heavy losses, while global lithium firm Arcadium Lithium earlier this year cut its planned sales numbers this year and warned that current market prices will weigh on future supply. South Korea's top battery manufacturer LG Energy Solution (LGES) reported W157bn of operating profit in January-March , but would have reported an operating loss of W32bn if it did not receive almost W189bn in US Inflation Reduction Act tax credits. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Nippon Steel delays timeline to acquire US Steel
Nippon Steel delays timeline to acquire US Steel
Tokyo, 3 May (Argus) — Japan's Nippon Steel has extended the scheduled timing of its US Steel acquisition completion until the end of the year, following a request by US authorities to submit more documentation, postponing an original plan of closing the deal by September at the latest. Nippon Steel will take more time to complete its $15bn deal to buy US Steel , as the Japanese firm received from the US Department of Justice a "second request" on submitting further documents necessary for the approval procedure. The deal was initially scheduled to close during April-September but is postponed to sometime during July-December, the Japanese firm announced on 3 May. Nippon Steel received the additional request in April, according to a company representative who spoke to Argus, without disclosing the specific date. The company anticipated the possibility of additional requirements, he added. The acquisition procedure may not finish before the US presidential election in November. Both the Democratic and the Republican party candidates repeatedly and vocally have opposed the deal , with incumbent US President Joe Biden pledging that a fellow American steel producer will be "American owned, American operated by American union steel workers". Nippon Steel is confident that its acquisition plan will eventually clear regulatory hurdles with "fair and objective judgement" from the US authorities, the representative added. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more