Speak to a specialist

Register and we will customize a solution that meets your exact needs. When you speak to one of our experts, you may be qualified to sample our industry-leading products on a no-cost basis.

You can unsubscribe from these updates at any time. We manage your personal data in accordance with our privacy policy.
Generic Hero BannerGeneric Hero Banner
Latest market news

US HDG/CRC: Prices drop, largest since 4Q

  • Market: Coking coal, Metals
  • 23/05/23

US hot-dipped galvanized (HDG) and cold-rolled coil (CRC) prices fell by their largest amounts since the end of October as mills cut prices amid broad downward pressure in the flat steel market.

The Argus weekly US ex-works HDG assessment dropped by $60/short ton (st) to $1,220/short ton (st), while the US ex-works CRC assessment fell by $64/st to $1,236/st.

Offers for US HDG remained in wide range over the past week with indicated levels between $1,160-1,280/st. Most competitive offers noted by market sources were between $1,200-1,240/st.

The Argus average US HDG mill lead time stalled out at 6-7 weeks, as mills struggle to push their orderbooks past early July.

US CRC prices also were available in a wide range over the past week. A mill source said they were able to secure one transaction as high as $1,375/st but most orders were between $1,330-1,350/st.

The mill prices varied significantly from a buyer who said he received an offer at $1,160/st for 350st with others only slightly higher at $1,180/st.

Another buyer indicated sub-$1,200/st pricing was a possibility after mills were looking to fill orderbook holes.

The Argus US CRC lead time was down at 6-7 weeks from 6-8 weeks.

Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
17/12/25

Australia coal, Fe prices to fall; LNG up: Treasury

Australia coal, Fe prices to fall; LNG up: Treasury

Sydney, 17 December (Argus) — Australian iron ore, coking coal, and thermal coal prices are expected to decline by the end of December 2026, while LNG prices may rise from current levels, according to Treasury forecasts released on 17 December. Australian commodity prices are expected to return to long-run fundamental levels, Treasury said in its Mid-Year Fiscal and Economic Outlook for the 2025-26 financial year ending 30 June. Thermal Coal Australia's thermal coal prices have been supported by ex-China demand since Treasury released its July 2025-June 2026 budget on 25 March, Treasury said. But it does not expect this trend to continue. Treasury forecasts Australian thermal coal spot prices will fall to $70/t on a fob basis by the end of December 2026, down from current levels. Argus ' Australian NAR 6,000 kcal/kg fob Newcastle price was last assessed at $108.46/t on 16 December, up from $95.62/t on 25 March. Australian thermal coal exports to China fell 11pc on the year in January-October ( see table ), while shipments to Japan, South Korea, Vietnam, and Malaysia rose, data from the Australian Bureau of Statistics show. Steelmaking Inputs Chinese economic policy support has lifted iron ore and metallurgical coal prices since March, Treasury said. But it expects Australian iron ore and coking coal spot prices to fall to $60/t and $140/t fob, respectively, by the end of 2026. Argus ' metallurgical coal premium hard low-volatile fob Australia price was last assessed at $215.10/t on 16 December, while its iron ore fines 61pc Fe (ICX) fob Australia netback price was last assessed at $90.55/t. Treasury also expects mining investment to remain unchanged over the next two years, largely because of the iron ore and coking coal sectors. Iron ore producers may invest in projects to maintain production, but coking coal producers are expected to run down their capital stock, Treasury said. Producers are looking to sell or finance around six Queensland coking coal mines, a market participant told Argus on 2 December. Petroleum LNG prices have declined since March because of China's shift toward non-Australian gas, Treasury said. Australian LNG spot prices are expected to reach $10/mm Btu by the end of December 2026, according to Treasury forecasts. Argus ' Gladstone fob price — an LNG netback indicator — was last assessed at $9.01/mm Btu on 16 December, down from $12.90/mm Btu on 25 March. China plans to prioritise pipeline and domestic gas over LNG imports in the coming years, PetroChina International's global head of LNG Yaoyu Zhang said on 4 December. Treasury also expects global oil prices to hover around $66/bl over the next four years, down from its March estimate of $81/bl. Australia's government will raise less revenue from its petroleum resource rent tax than previously expected because of the downgrade, the agency added. The tax is forecast to generate A$1.5bn in 2025-26, down from the earlier estimate of A$1.95bn. By Avinash Govind Treasury Commodity Forecasts (Mid-Year Economic and Fiscal Outlook) $ Commodity Argus Price (most recent)* Forecasted Price* Change (%) Coking Coal 215.1/t 140/t -35.0 Thermal Coal 95.62/t 70/t -26.8 Iron Ore 90.55/t 60/t -33.7 LNG 9.01/mm Btu 10/mm Btu 11.0 * Argus' Australian NAR 6,000 kcal/kg fob Newcastle; metallurgical coal premium hard low-volatile fob Australia; Argus' Gladstone fob; Iron ore fines 61pc Fe (ICX) fob Australia netback * fob Australia basis, at end of December 2026 Argus, Commonwealth of Australia Australian thermal coal exports mn t Market Jan - Oct '25 Jan - Oct '24 YTD Change (%) China 53 60 -11 India 2.9 3.4 -16 Japan 59 59 0.5 South Korea 11 9.7 12 Vietnam 13 9.6 37 Malaysia 5.9 5.4 11 Australian Bureau of Statistics Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Brazil steel output may fall in 2026: Aco Brasil

16/12/25
News
16/12/25

Brazil steel output may fall in 2026: Aco Brasil

Sao Paulo, 16 December (Argus) — Brazilian steel output may drop in 2026 as lower-priced imports keep pressure on the domestic market, industry chamber Aco Brasil said. The country's steel output will fall to 32.4mn metric tonnes(t) in 2026, down by 2.2pc from a year earlier, driven by a 10pc climb in imports to 6.6mn t in the period. These figures exclude the effects of anti-dumping duties expected to take effect in the first half of the year, Aco Brasil said. "Our mills are operating at a 66pc capacity rate because of predatory imports, but we should be at around 80–85pc output capacity", Aco's executive president Marco Polo de Mello Lopes said in a press conference on 16 December. Imports will also weigh on domestic sales, with shipments expected to decline to 20.8mn t next year, down by 1.7pc from 2025, the association said. Imports are expected to reach a record 6.6mn t, up by 3.9pc from the previous all-time high of 6.4mn t projected for 2025, Aco Brasil said. Apparent consumption, the sum of production and imports minus exports, will increase by 1pc on the year to 27mn t in 2026, mainly driven by rising import levels. Revised 2025 projections The chamber has cut its 2025 projection for import growth from 19pc to 7.5pc because domestic price declines are curbing a sharper rise in foreign metal. The revised outlook now sees rolled steel imports at 5.7mn t, up by 20pc instead of the previously estimated 32pc. Imports have already hit an all-time high of 6mn year-to-date November 2025, up by 7pc year on year. Total import volumes may increase to 6.4mn t by year-end, according to Aco Brasil. Despite reaching record levels, import inflows lost traction in the second half of the year. As a result, Aco Brasil's initial projection of 7mn t in imports for the year will likely fail to materialize. In addition to price declines, Brazil's quota policy helped reduce import volumes, sources told Argus . The regime imposes a 25pc tariff on volumes that exceed the quota threshold for 19 rolled steel products. Importers also became wary of anti-dumping duties set to take effect in a couple of months. Seaborne trade has become riskier, as duties of up to $600/t could apply upon discharge at Brazilian ports, market participants said. New anti-dumping duties could reverse import growth, with volumes likely to fall instead of rise if the measures take effect. Whether this will be enough to lift production levels remains uncertain. Aco Brasil has also revised its 2025 output outlook, now projecting a 2.2pc drop to 33.1mn t, compared with a previous estimate of a 0.8pc decline to 33.6mn t. Production cuts deepened despite imports falling short of expectations throughout the year, suggesting that factors beyond imports may be driving the reduction. By Isabel Filgueiras Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

US House clears hurdle to pass permitting bill

16/12/25
News
16/12/25

US House clears hurdle to pass permitting bill

Washington, 16 December (Argus) — Republicans in the US House of Representatives have overcome an initial obstacle to passing a marquee permitting overhaul bill after committing to vote on key amendments that would strip out potential benefits for offshore wind. Republicans in the House voted 215-209 in a vote on Tuesday to approve a rule that will dictate the terms of debate for votes later this week on the SPEED Act, which has become the focus of bipartisan efforts to fast-track the permitting process for pipelines, electric transmission lines, railroads and other infrastructure. A group of far-right conservatives initially voted against the rule, but most reversed course during the vote in exchange for revisions that have yet to be made public. The Tuesday vote was one of the last remaining hurdles to House passage of the SPEED Act, which is expected to pick up some Democratic votes when it comes up for a final vote later this week. The House majority typically is responsible for putting up all the votes for a rule, meaning it would only take a few Republicans to block bill debate. Republicans were uncertain they would have enough votes for the rule, as far-right conservatives such as US representative Andy Harris (R-Maryland) and others were lobbying for changes. On Monday, US representative August Pfluger (R-Texas) urged attendees of a conference to put as "much effort as you possibly can" into persuading wavering Republicans to support the permitting bill. Pfluger is the chair of the Republican Study Commission, a caucus that represents a majority of House Republicans. "Go talk to them and let them know how important this is," Pfluger said during an event organized by the think tank the Conservative Coalition for Climate Solutions. Ahead of the vote, an industry coalition on Tuesday released a joint letter offering "strong support" for the bill. Among the signatories were the American Petroleum Institute, the US Chamber of Commerce, the Association of American Railroads and the US LNG Association. President Donald Trump has yet to take an explicit position on the SPEED Act, but administration officials are optimistic permitting legislation could be enacted. "I think we are at a time where the chance of a real permitting reform bill is higher maybe than it's ever been," US energy secretary Chris Wright said at the event on Monday. The SPEED Act would focus on the implementation of the National Environmental Policy Act (NEPA), a decades-old law that requires federal agencies to prepare environmental reviews of infrastructure projects. Pipeline companies and renewable energy developers alike blame the law for costly delays, both because of the time it takes for agencies to issue reviews and then the risks that permits will be thrown out because of lawsuits. The bill would narrow the scope of environmental reviews, aligning with a unanimous US Supreme Court ruling this summer. But the bill's most significant changes would make permits more durable. Even if a court found a NEPA review was flawed, the bill would keep permits intact during further analysis. And in a last-minute change, the bill would offer more permit "certainty" by limiting the government's ability to rescind prior approvals. That could protect pipeline permits such as the now-canceled Keystone XL pipeline, while also stopping Trump from halting more offshore wind projects. But the permit certainty language drew concern from far-right conservatives who oppose offshore wind. House Republicans in response agreed to vote on an amendment sponsored by Harris and others that would remove the "permit certainty" changes. Two other amendment votes also backed by Harris would stop expedited permitting treatment in the SPEED Act for offshore wind or any project that Trump has sought to block. Passage of those amendments could cost some Democratic support for the bill. Even if the bill passes, it is expected to be subject to major changes in the US Senate to attract enough support from Democrats to prevent a filibuster. Senate Democrats are hoping to insert language that would prevent what they describe as a "solar ban" being enforced by the Trump administration. By Chris Knight Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

US adds 64,000 jobs in November, jobless rate climbs

16/12/25
News
16/12/25

US adds 64,000 jobs in November, jobless rate climbs

Houston, 16 December (Argus) — The US added more jobs than expected in November after sharp losses in October fueled by government job cuts, while the unemployment rate rose to its highest in four years. The US added 64,000 nonfarm jobs in November, more than the 50,000 anticipated by economists surveyed by Trading Economics. The unemployment rate rose to 4.6pc, up from 4.4pc in September and the highest since September 2021, the Bureau of Labor Statistics (BLS) reported. The US lost 105,000 jobs in October, largely due to earlier federal job cuts, according to data that had been delayed because of the 43-day government shutdown that ended on 12 November. Job creation in November was largely in line with average growth since April, BLS said, marking an ongoing slowdown in hiring from earlier in the year. "The labor market remains weak, but the pace of deterioration probably is too slow to spur the [Federal Reserve's Federal Open Market Committee] FOMC to ease again in January," Pantheon Macroeconomics said in a note after the report was released. After the report, CME's FedWatch Tool showed a 26.6pc probability the FOMC will cut its target rate by a quarter point at its next meeting in January, compared with 24.4pc odds on Monday. The FOMC cut its target rate by a quarter point last week to 3.5-3.75pc, its third such cut of the year, and it penciled in only one such cut each for 2026 and 2027. Employment rose in health care and construction in November. Federal government jobs fell by 6,000 in November, following estimated job losses of 162,000 in October, as some employees who accepted deferred resignation came off payrolls. Federal government employment was down by 271,000 from a peak in January after the administration of President Donald Trump began slashing jobs as part of his effort to cut the federal workforce, even as courts and federal unions pushed back, delaying and limiting the impacts. Manufacturing lost 5,000 jobs in November following losses of 9,000 in October, BLS said. Transportation and warehousing lost 18,000 jobs in November. Leisure and hospitality lost 12,000 jobs after gains of 16,000 in October. Construction added 28,000 jobs in November. Mining and construction lost 4,000 jobs in November. Changes in nonfarm job growth for August and September were revised lower by a combined 33,000 jobs, with September revised down to 108,000 jobs added from 119,000 in the initial estimate. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Canadian authorities approve Anglo, Teck mining merger

16/12/25
News
16/12/25

Canadian authorities approve Anglo, Teck mining merger

Sydney, 16 December (Argus) — Canadian regulators have approved the merger of UK-South African producer Anglo American and Canadian producer Teck Resources, allowing the pair to form a Canadian-based global iron ore, copper, zinc, and coking coal business. Anglo Teck — the merged firm — will spend C$4.5bn ($3.3bn) in Canada over the next five years and C$10bn over 15 years under binding Investment Canada Act commitments, Anglo American told investors on 16 December. The merged firm's short-term spending will support germanium, copper, and other critical mineral projects (see table) , as well as research and community projects. Anglo Teck will also hold its Canadian employment levels constant for an unspecified period and list itself on the Toronto Stock Exchange, Anglo American said. Anglo American and Teck Resources shareholders approved the $53bn merger on 11 December. But the deal still faces competition reviews in multiple countries, where the two firms operate. Anglo Teck will be a top five global copper producer, Teck Resources' chief executive Jonathan Price said on 9 September, when he announced the deal. Teck Resources plans to produce 415,000-465,000t of copper , 525,000-575,000t of zinc, 3,500–4,800t of molybdenum, and other metals in 2025, it said on 8 October. Anglo American also plans to produce 690,000–750,000t of copper and 57mn–61mn t of iron ore over the year. Anglo American intends to advance plans to divest from its diamond, coking coal, and nickel businesses before the deal closes, a move supported by Teck Resources. US producer Peabody Energy pulled out of a $3.8bn deal to buy Anglo American's Australian coking coal assets in August. Anglo Teck's merger approval also comes less than a month after Australian producer BHP submitted and withdrew an offer to buy Anglo American. By Avinash Govind Anglo Teck's spending commitments Commitment Value* (C$mn) Mineral Proceed with Highland Valley Copper Mine Life Extension 2100 - 2400 Copper Enhance critical minerals processing capacity at Teck's Trail Operations 850 Germanium and other critical minerals Develop Galore Creek and Schaft Creek copper projects 750 Copper Support Canadian critical mienral exploration and junior miners 300 Critical Minerals Maintain and enhance commitments to Indigenous governments, communities, conservation, and other initiatives 200 - Establish Global Institute for Critical Minerals Research and Innvoation 100 Critical Minerals Continue and maintain Teck's remediation and reclamation activities Copper Explore increasing copper production at Trail Operations and building a copper smelter in British Columbia Copper *Spending up to Anglo American Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Related Products

Argus Rare Earths Analytics Service

Argus Rare Earths Analytics Service

Rare earth price forecasts with short and long-term views supported by detailed market fundamentals for trade, supply and demand
Find out more

Argus Line Pipe

Argus Line Pipe

Price assessments, outlooks and market-moving commentaries, news and analyses for the line pipe market.
Find out more

Argus Battery Materials

Explore end-to-end battery metals industry insight, with over 200 price assessments supported by daily market analysis, forecasts and powerful tools
Find out more

Argus Tungsten Analytics

Market analysis and 10-year forecasts across tungsten supply, demand, prices and projects.
Find out more

Argus Seaborne Coal Outlook

Independent analysis, trusted price forecasts, and data analytics to help you make optimum decisions.
Find out more
Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more