Generic Hero BannerGeneric Hero Banner
Latest market news

Osaka Titanium eyes output boost to meet airplane needs

  • Market: Metals
  • 29/05/24

Japanese producer Osaka Titanium Technologies plans to boost its titanium sponge capacity, spurred by higher demand from the aviation industry that has led to it posting higher sales and profits.

It plans to invest ¥30bn ($191mn) to set up a new plant in Japan's western Amagasaki city to meet growing demand for titanium sponge. This will lift its production titanium sponge capacity in Amagasaki to 50,000 t/yr from 40,000 t/yr currently.

Most of the demand for its major product titanium sponge comes from the aviation industry, which consumes a significant amount of titanium sponge to produce things like engine components.

This demand contributed to its net sales and net profit of around ¥55.3bn and ¥8.3bn respectively in the April-2023-March 2024 fiscal year, up by 28pc and 73pc on the year, it said on 24 May. Export and domestic sales were up by around 40pc and 20pc on the year respectively, but Osaka Titanium did not disclose further details like sales volumes.

Osaka Titanium operated its Amagasaki plant at almost full capacity throughout 2023-24 to produce titanium sponge, meeting "expanded demand" from the aviation industry.

Osaka has reached a tentative decision to build the new plant near its existing Amagasaki facility after considering other production sites, including overseas. This is largely because the company can start commercial operations faster by leveraging infrastructure at its existing plant, an Osaka Titanium representative told Argus. The company can also minimise construction costs, he added.

Firm demand, especially for use in small aircraft, has lifted Osaka Titanium's financial outlook for 2024-25, with it predicting net sales and profit to come in at ¥57bn and ¥11bn respectively.

The global aircraft market for smaller airplanes is expanding after recovering from sluggish demand caused by the Covid-19 pandemic. The medium- to large-sized airplane market will also make a full-scale recovery in the medium term, the company said.

This is despite growing concerns among materials suppliers about demand in the near term after US airplane maker Boeing had to halt plans to produce 50/month of its flagship 737 MAX aircraft between 2025 and 2026. This was brought on by a US Federal Aviation Administration decision to cap Boeing's output at 38/month following a mid-air panel blowout in early January that resulted in the temporary grounding of over 170 737 MAX 9s.

"We do not recognize any immediate concerns," the Osaka Titanium representative said. "Our clients request us to produce as much as possible."


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
17/07/25

Q&A: American Pacific sees copper growth ahead

Q&A: American Pacific sees copper growth ahead

Houston, 17 July (Argus) — US President Donald Trump's planned 50pc tariffs on copper imports could drive significant changes in the domestic industry. Argus spoke with American Pacific Mining chief executive Warwick Smith and managing director of exploration Eric Saderholm — owners of several copper assets in the US — on the short and long-term copper outlook. Edited highlights follow : Will the expected 50pc copper import tariffs play a lasting role in changing US production and smelting capacity? Saderholm : Copper tariffs will greatly impact copper-centric companies. Both miners and downstream users will certainly be affected. The overall tariff moves are somewhat founded but I do not know if they will work across the board, especially for producing and refining domestic copper. The problem lies in the fact that while the US has significant copper reserves, it will take a long time to build new mines. The US really has no way to keep up with the copper production needed to be self-reliant. We must have smelting capabilities as well. Our processing techniques have been compromised over the last several decades, especially with smelters. We have allowed many US smelters to be blown up, removed, or become nonfunctional. The US government will have to think about funding the construction of smelters. Smith : The copper "tariff talk" from the White House has already started to play a role, as prices drastically increased following the tariff announcement. Larger US refined copper producers, such as Freeport-McMoRan and Rio Tinto, will likely need to start acquiring new copper sources under development. As larger companies scramble to look for US-based copper assets to build new mines, smaller companies with assets in the US will see stronger demand. Considering the inverse US dollar/copper price relationship and the falling dollar in the last year, do you see further incentives for more investment? Smith : I think this area of investment to move these assets forward has been under appreciated and under financed for at least a decade, up until the last two months. More money will continue to come into the market out of necessity, not because of a sudden shift. The world is heading in an increasingly "green" direction, which requires copper. We are seeing that partially play out now. I think there will be more significant investment into both major mid-tier and smaller mining companies that focus on copper as well. With the IEA and others warning of a copper deficit by 2035, do you expect the US to run into supply issues with current production capabilities? Smith : I think the short answer is yes because of an escalating supply-demand imbalance. The US will need to catch up in terms of production and finding new assets. Expediting permitting timelines will also be key to catching up on production. Not only is there a need to find new mines, but a need to permit them quickly enough to get them into production and drive those assets forward. What efforts by the current administration to shorten permitting, construction and start up times would contribute the most to additional capacity? Smith : They have come up with the FAST 41 transparency list focused on expediting strategic metal projects. The FAST 41 list is quite smart. Anecdotally speaking, getting exploration permits has become a lot quicker than under the Biden administration. We have worked since the Obama administration and Republicans do make things move a lot quicker. There is a project that we own in Nevada that under Obama, took us 6.5 weeks to get permits to drill. Under Trump, the first permit approval took four days. That is just exploration drilling now when you think about permitting in mind. You can extrapolate those timelines virtually the same way. It makes a big difference. From that standpoint, we like what they are doing. Some of the Department of Defense funding has also been very helpful. They have put a lot of money into that as well. I think they are doing a lot of the right things on that front. Saderholm : The expedited permitting initiatives are a bit of a double-edged sword. With Trump taking office at the beginning of the year, he wanted a lot of federal jobs to be eliminated. We have had issues with the lack of personnel. Even though they want to fast-track permits, there are not a whole lot of people to fast track them for you. Where do your Palmer VMS and Madison Mine projects stand currently? Smith : The Madison asset in Montana is our flagship. It is a really high-grade skarn surface with a porphyry underneath. We're wrapping up some drilling there and will lead another drill campaign shortly. The location is great as well. It is 40 miles from one of the largest porphyries in the world. It has the hallmarks that it could be a big winner for us. We also own 100pc of the Palmer project, a 16.7mn tonne volcanogenic massive sulfide (VMS) project up in Alaska. We have had many discussions about the project with other groups interested in the asset. The asset is probably 8-10 years away from production. By Reagan Patrowicz Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Alcoa's global Al output up, bauxite and alumina fall


17/07/25
News
17/07/25

Alcoa's global Al output up, bauxite and alumina fall

Sydney, 17 July (Argus) — US producer Alcoa's aluminium output increased on the year in April-June despite the months-long closure of its San Ciprián aluminium smelter in Spain. But its bauxite and alumina output fell in the quarter. Aluminium Alcoa smelted 572,000t of aluminium in April-June, up by 5.3pc on the year, the company said in a quarterly report on 17 July. It has maintained its 2025 aluminium production guidance at 2.3mn-2.5mn t, which it set in January. The increase came from the continued ramp-up of its 447,000 t/yr Alumar smelter in Brazil. It operates the smelter with Australian producer South32 . The two companies reopened the aluminium smelter in 2024 after a nine-year production halt. Alcoa's Alumar ramp-up offset production declines from the shutdown of its San Ciprián aluminium smelter in Spain. The company initially paused production at the 228,000 t/yr plant in December 2021. It began a phased restart in early 2024 , but paused it in late-April 2025 because of a major power outage. Alcoa will fully restart the plant by mid-2026 with the support of energy solutions provider Ignis Equity Holdings. Alcoa shipped 581,000t of produced aluminium in April-June, as well as 53,000t of third-party aluminium, pushing down its total shipments by 6.5pc on the year ( see table ). The company also reduced its 2025 aluminium shipment guidance to 2.5mn-2.6mn t from its April forecast of 2.6mn-2.8mn t because of the San Ciprián shutdown. Alcoa, like many other global aluminium producers, faced tariff pressures in April-June. The company redirected some Canadian-produced aluminium away from the US over the quarter, it told investors. Alcoa expects tariffs to cost $90mn in July-September. US tariffs similarly cost UK-Australian producer Rio Tinto in April-June . It paid $712/t of aluminium shipped to the US over the quarter, the company told investors on 16 July. Bauxite and alumina Alcoa produced 9.3mn t of bauxite and 2.4mn t of alumina in April-June, down by 2.1pc and by 7.4pc on the year respectively. It shut its 2.2mn t/yr Kwinana alumina refinery in late 2024, reducing its production capacity. The company has maintained its 2025 calendar year alumina production guidance at 9.5mn-9.7mn t, unchanged from April. It also cut its produced alumina shipments in the quarter to 2.4mn t, down from 2.6mn t a year earlier, but this was supplemented by third-party shipments. The company maintained its 2025 alumina shipment guidance at 13.1mn-13.3mn t. Alcoa will ship more alumina than it produces in 2025 because it plans to use third-party sales as a substitute for Kwinana production to meet existing shipment obligations. By Avinash Govind Alcoa quarterly report mn t Apr-Jun '25 Apr-Jun '24 y-o-y Change (%) Jan-Jun '25 Jan-Jun '24 YTD Change (%) Production Bauxite 9.3 9.5 -2.1 18.8 19.6 -4.1 Alumina 2.4 2.5 -7.4 4.7 5.2 -9.7 Aluminium 0.6 0.5 5.3 1.1 1.1 4.7 Shipments Alumina (produced) 2.4 2.6 -8.1 4.7 5.2 -9.9 Alumina shipments (other) 3.3 3.3 -0.2 6.5 6.6 -2.3 Aluminium (produced) 0.6 0.6 -2.4 1.1 1.1 0.3 Aluminium (other) 0.05 0.1 -36.6 0.1 0.2 -43.4 — Alcoa Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

New tariff threat could disrupt Mexico GDP outlook


16/07/25
News
16/07/25

New tariff threat could disrupt Mexico GDP outlook

Mexico City, 16 July (Argus) — Mexico's association of finance executives IMEF held its 2025 GDP growth forecast steady at 0.1pc in its July survey but warned the outlook could deteriorate if the US raises tariffs to 30pc. The survey of 43 analysts maintained projections for year-end inflation at 4pc and for the central bank's benchmark interest rate to fall from 8pc to 7.5pc by the end of 2025. The sharpest variation came in formal employment, after Mexico's social security administration IMSS reported a net loss of 139,444 formal jobs in the second quarter. IMEF cut its 2025 job creation forecast to 160,000 from 190,000 in June — the seventh and largest downgrade this year. Job losses increased in April, May and June, "a situation not seen since the pandemic in 2020," IMEF said. "If this trend is not reversed, the net number of formal jobs could fall to zero by year-end." "It is still too early to call it a recession, but the rise in job losses is worrying," said Victor Herrera, head of economic studies at IMEF. "The next risk we face is in auto plants. Some halted production after the 25pc US tariff was imposed in April. They did not lay off workers right away — they sent them home with half pay. But if this is not resolved in the next 60-90 days, layoffs will follow." The July survey was conducted before US president Donald Trump said on 12 July he would raise tariffs on Mexican goods from 25pc to 30pc starting 1 August. "What we have seen in the past is that when the deadline comes, the tariffs are postponed or canceled," Herrera said. "Hopefully, that happens again. If not, you can expect GDP forecasts to shift into contraction territory." While the full impact would vary by sector, Herrera said the effective average tariff rate would rise from 4pc to 15pc, with most exports either exempt or subject to reduced rates under regional content rules. But 8–10pc of auto exports would face the full 30pc duty. IMEF expects the peso to end 2025 at Ps20.1/$1, stronger than the Ps20.45/$1 estimate in June. But the group warned that rising Japanese rates — which influence currency carry trades — and falling Mexican rates could put renewed pressure on the peso once the dollar rebounds. For 2026, the GDP growth forecast dropped to 1.3pc from 1.5pc, while the peso is seen ending that year at Ps20.75/$1, slightly stronger than the previous Ps20.90/$1 forecast. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

UK HDG buyers duplicate import orders amid quota issues


16/07/25
News
16/07/25

UK HDG buyers duplicate import orders amid quota issues

London, 16 July (Argus) — UK hot-dip galvanised importers are increasing imported order volumes in some instances because of the government's imposition of a 15pc cap on the other countries' quota. The UK business secretary, Jonathan Reynolds, imposed the cap on 24 June, days before the quota reset on 1 July, stranding supply from South Korea and Vietnam . HMRC has now suspended clearances into the quotas for Vietnam and South Korea — the main users of the other countries' quota — until 1 August, meaning steel cannot be accessed even where buyers are willing to pay a duty. This is contributing to storage issues at major ports, particularly Liverpool. One service centre said major construction companies are worried about delays to some projects because of availability issues on particular gauges and coatings. Because of the potential disruption, some buyers have booked material elsewhere, in particular from Turkish rerollers, to avoid supply issues. The government's action, designed to protect the domestic producer Tata Steel, has "increased the amount of imports, as we are having to go elsewhere aside from South Korea and Vietnam", one service centre said. Tata does not produce all the necessary sizes and specifications for domestic buyers, sources suggest. There is typically abundant EU quota for HDG, but European mills, like Tata, struggle to compete with Asian sellers because of their higher energy costs. Simone Jordan, the director of the International Steel Trade Association (ISTA), called on the secretary of state to "address this catastrophic situation and reconsider his determination". Import volumes not rising There has been no real increase in third-country hot-dip galvanised coil imports into the UK since the US imposition of Section 232 in 2018. The country imported 468,500t of HDG last year, compared with just over 485,000t in 2018; there was a large jump in 2021, to over 732,000t, as buyers scrambled to source material following the Covid-19 pandemic, when demand increased much more sharply than European supply. The most notable change in imports is the increased share of South Korea, which has risen from around 15pc of non-EU imports in 2018 to over 43pc today. Much of that growth started last year, when a leading producer in the country started to divert automotive material into the general industrial market in the UK. Vietnamese volumes have also ratcheted up in recent years, partly because it was exempt from the safeguard on HDG for a period, before it came into scope. Vietnam is the largest importer of Chinese hot-rolled coil, whose low-priced exports have reshaped global trade flows in the last year. Turkey, which is now exempt from the UK safeguard on HDG, is also a large buyer of Chinese HRC; indeed, the country's rerollers can avoid dumping duties on Chinese material, provided it is re-exported. Vietnam and South Korea shipped over 281,000t of HDG to the UK last year, accounting for over 60pc of third country volumes, and account for almost three-quarters of third country imports over January-May this year. India has been the cheapest supplier of HDG into the UK on average this year, according to customs data. The average landed Indian price has been £587/t cfr, followed by Taiwan at £607/t and Vietnam at £618/t. Vietnam is the cheapest import source on average, at £472/t, closely followed by India at £475/t. Tata Steel is the largest buyer of Indian coil in the UK at present. By Colin Richardson UK HDG imports Tonnes Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Rio Tinto’s copper output rises 15pc on year in Apr-Jun


16/07/25
News
16/07/25

Rio Tinto’s copper output rises 15pc on year in Apr-Jun

Sydney, 16 July (Argus) — Anglo-Australian mining company Rio Tinto produced 229,000t of copper — including copper in concentrate and refined metal — in April-June 2025, up 15pc on the year, driven by record high output from its Oyu Tolgoi underground mine in Mongolia. The company maintained its 2025 copper production guidance range at 780,000-850,000t, but now expects output to sit in the upper end of the band, it said in a quarterly report on 16 July. Rio Tinto's Oyu Tolgol mine hit a record high production of 87,000t of copper in concentrate at in April-June, up 65pc on the year (see table). The company plans to ramp up production at the mine over the next few years and reach an average of 500,000 t/yr of copper by 2028-2036. Rio Tinto's copper concentrate production at its Escondida mine in Chile, which is operated by Australian producer BHP, reached 87,000t on an equity basis in April-June, up 4pc on the year because of increased mining. The increase came despite a drop in ore grades at the open-pit copper mine to 0.95pc Cu from 0.99pc Cu a year ago. Rio Tinto's copper refining operations slowed at the Escondida mine and the Kennecott mine in the US. Geotechnical challenges at the integrated copper mining operation in Kennetcott, located just outside Salt Lake City in Utah, decreased the volume of concentrates available for refining. This pushed down the site's refining output by 16pc on the year. Rio Tinto is expanding the Kennetcott mine capacity by 250,000 t/yr by building an underground infrastructure. The expansion is expected to be completed by end of 2025. By Avinash Govind Rio Tinto's Apr-Jun copper output 000' t April-June '25 April-June '24 y-o-y Change (%) April-June '25 April-June '24 y-o-y Change (%) Kennecott (refined copper, 100pc basis) 40 48 -16 82 95 -14 Escondida (copper concentrate, equity basis) 87 84 4 176 155 13 Escondida (refined copper, equity basis) 15 15 -4 28 30 -6 Oyu Tolgoi (copper concentrate, 100pc basis) 87 53 65 152 99 54 Total 229 199 15 438 379 16 Rio Tinto Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more