Lithium hydroxide demand to overtake carbonate: AABC

  • Market: Metals
  • 29/01/19

Production of lithium hydroxide is expected to overtake lithium carbonate in the next five years in response to changes in electric vehicle (EV) battery materials, delegates heard at the Advanced Automotive Batteries Conference (AABC) in Strasbourg, France.

Lithium carbonate accounted for around 60pc of lithium demand in 2018, but battery technology development is increasing demand for lithium hydroxide, which is expected to account for a larger share of the market by 2024, said Bart Vanden Bossche, sales director at Chilean producer SQM. Demand for lithium carbonate is expected to rise at a compound annual growth rate (CAGR) of 10-14pc in 2018-27, while lithium hydroxide demand is seen rising at a 25-29pc CAGR.

Consumer concerns about the driving range of EVs have prompted the government in China, the world's largest EV market, to use subsidies to incentivise production of lithium-ion batteries with higher energy densities. That has precipitated a switch to cathode material manufacturers using compounds of lithium nickel-cobalt-manganese (NCM) and lithium nickel-cobalt-aluminium (NCA) rather than lithium iron phosphate (LFP).

But the higher nickel content in NCM cathodes can present challenges in terms of chemical stability. If the metals are used in a ratio of six parts nickel to two parts cobalt and two parts manganese (6-2-2), or 8-1-1, rather than 1-1-1 or 5-3-2 as in the past, the chemistry requires lithium hydroxide rather than lithium carbonate. Cathodes using an 8-1-1 ratio are some way from commercial viability, owing to safety problems with the chemistry, delegates heard.

As nickel content approaches 60pc, the higher temperature required to synthesise cathode material with lithium carbonate damages the crystal structure of the cathode and changes the oxidation state of the nickel metal. But lithium hydroxide allows rapid and complete synthesis at lower temperatures, increasing the performance and lifespan of the battery, said Marina Yakovleva, global commercial manager for new product and technology development at lithium producer Livent.

Trade flows reflect the increasing use of lithium NCM cathodes. China imported 20,394t of NCM oxide from South Korea and Japan in 2018, up from 9,142t in 2017 and 2,352t in 2015, data from Global Trade Tracker show.

That change in demand is prompting producers to expand their lithium hydroxide output and shifting mining projects towards developing lithium hydroxide production rather than lithium carbonate.

"The industry has to make the necessary investments," said SQM's Vanden Bossche. "It will be quite a dramatic change for lithium producers." Production of lithium hydroxide has typically been a two-step process, using lithium brines to produce lithium carbonate, then converting the lithium carbonate into lithium hydroxide.

But mining of lithium spodumene from hard rock is increasing, with producers able to use this to process either carbonate or hydroxide for the same cost. "Companies will either look into more direct conversion into hydroxide or be at a disadvantage," Vanden Bossche said.

Brine producers will continue to produce carbonate as a first step, but will look for ways to reduce costs. SQM is expanding its lithium carbonate capacity in stages to 180,000 t/yr from 70,000 t/yr, while it has received permits to expand its lithium hydroxide capacity to 32,000 t/yr from 13,500 t/yr. The company is looking to further diversify its production, having invested in an Australian spodumene project with lithium hydroxide output and begun looking for opportunities to invest in other countries.

Australia-based Infinity Lithium is developing a project in Spain and has shifted its focus to producing lithium hydroxide rather than lithium carbonate. The cost of producing lithium hydroxide from spodumene rock deposits is below the cost of production from brines, and in future hydroxide will account for the majority of lithium produced, said Infinity vice-president of European corporate strategy and business development, Vincent Ledoux Pedailles.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/24

Crane barge arriving at Baltimore bridge tonight

Crane barge arriving at Baltimore bridge tonight

Houston, 28 March (Argus) — The first major piece of equipment capable of beginning to clear the blocked Port of Baltimore, Maryland, is expected to arrive onsite tonight. The Chesapeake 1000 crane barge, capable of lifting 1,000 short tons with its a 231ft-long boom, is expected to arrive at the site of the collapsed Francis Scott Key Bridge near Baltimore at 11pm ET on 28 March, the US Coast Guard (USCG) told Argus . Both the crane and the tug pulling it, Atlantic Enterprise , are owned by Donjon Marine. It is currently the only crane on route to the collapsed bridge, the USCG said. There is no official timetable for the reopening of the port after the Interstate 695 highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. The operator of the ship, Maersk, has contracted with marine salvage company Resolve Marine to refloat the vessel and remove it from the area, according to the USCG. It is not clear who has contracted for the Chesapeake 1000. Despite the inbound crane, it could take weeks or even months to clear debris and reopen the waterway under the collapsed bridge according to a engineering professor at the nearby Johns Hopkins University. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

'Weeks, months' to reopen Baltimore waterway: professor


28/03/24
News
28/03/24

'Weeks, months' to reopen Baltimore waterway: professor

Houston, 28 March (Argus) — It could take weeks or even months to clear debris and reopen the waterway under the collapsed Francis Scott Key Bridge in Baltimore, Maryland, according to a engineering professor at the nearby Johns Hopkins University. As of Wednesday, there was no official timetable for the reopening of the Port of Baltimore after a major highway bridge over the Patapsco River was hit in the early hours of 26 March by a container ship and collapsed, with the debris and ship blocking the waterway. "I'd be shocked if it's weeks, but I don't think it'll take even a year" to clear the waterway, structural engineer and Johns Hopkins professor Benjamin Schafer said Wednesday. He expects the rebuild of the bridge to take significantly longer. "I've lived through quite a few civil infrastructure projects and they're rarely less than 10 years. So I think that's what we're looking at," Schafer said. He noted that it took five years to build the original Francis Scott Key Bridge and seven years to repair the Sunshine Skyway Bridge in Tampa Bay, Florida, after a similar collapse in 1980. Still, "this is definitely not a national supply chain crisis," John Hopkins operations management professor Tinglong Dai said Wednesday. "The effect will be mostly local, mostly minimal and mostly temporary." The bridge collapse and port closure is also unlikely to trigger a global supply chain crisis, he said. The Port of Baltimore is an important but "niche" port specializing in automobile imports and exports, Dai added. "The supply chain has evolved...I have already seen a lot of rerouting happening." Automakers started adjusting their supply routes away from the top port for US vehicle imports the day of the collapse, including General Motors, Ford and Mercedes-Benz. Baltimore is also a major port for coal exports, which may start to shift to terminals to the south in Hampton Roads, Virginia. Freight rates for ships that carry coal could see increases in global markets Other commodities like asphalt and caustic soda that move through the port will see challenges, while organic agriculture imports may see less problems due to seasonal flows. By Nathan Risser Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Europe plate: Imports weigh on EU prices


28/03/24
News
28/03/24

Europe plate: Imports weigh on EU prices

London, 28 March (Argus) — Plate prices in Europe tumbled this week on increased import activity, which has pushed European producers to adjust their offers down to remain competitive. The Argus fortnightly Italian plate assessment dropped by €22.50/t to €730/t ex-works today for S235 grades, while the northwest European plate assessment for the same specifications also dropped by €15/t to €765/t. In the south, for S275 material, re-rollers were heard quoting €740-750/t to small customers, with €720-730/t possible for larger volumes. The market remained split between suppliers willing to drop to the low €700s/t to collect orders, and others that preferred to remain firm at €740-750/t and wait for after the Easter holidays to see how the market develops. Two re-rollers confirmed this week that they are mulling extending their Easter break by a few days owing to weak purchasing activity in the market. The level of €710/t ex-works for S275 was also reported available for orders of 1,000t and above, but this could not be verified. Buying activity over the past two weeks remained poor, as market participants are purchasing what they need with no restocking activity occurring. A slight drop in slab prices has contributed to lower plate prices. Deliveries for the Italian domestic market remain for late April for commodity grades. To the rest of Europe, Italian producers were heard offering around €750/t on a ex-works basis for S235 material, without collecting any tonnage. One source said there were offers as high as €760-770/t ex-works Italy. In northern Europe, one mill was reported concluding sales to end-users working in the shipbuilding industry at €750-770 ex-works for S355 grades. The same producer tabled offers at around €780/t, but was quick to offer discounts. Orders from the supplier are expected to be delivered in six to seven weeks. One source estimated that for S235, integrated mills would be offering close to €780-800/t ex-works, while from re-rollers located in the Benelux area €750/t ex-works for the same grade could be easily achieved. One central European mill was also heard available to sell at €790-810/t ex-works for S235. Producers in the northwest are operating on April to May delivery depending on the mill and the product requested. Market participants agree that a rebound in market activity is only expected towards the latter part of April. On imports, over the past couple of weeks, Indonesian material was purchased by buyers across the continent, especially in southern Europe at €640/t cif levels for S275. One source estimated that sales from Indonesia totalled close to 60,000t over the past month. After this activity, Indonesian material was not reported available over the past seven days. One deal was also concluded this week at €710/t cfr north EU, for South Korean S355 material. From South Korea, offers for S275 were estimated over the €660/t cif Italy level this week, with no deals concluded. Indian material was offered at $710-720/t cfr Italy for S275, while one trader offered the same origin from port, free on truck at €730/t for S355. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Turkey rebar: Market muted ahead of elections


28/03/24
News
28/03/24

Turkey rebar: Market muted ahead of elections

London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Taiwan scrap imports fall 13pc on year in February


28/03/24
News
28/03/24

Taiwan scrap imports fall 13pc on year in February

Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more