Chinese steel export threat looms over scrap markets
The relative strength of China's steel markets has frozen its spot export sales, easing the glut in seaborne trade, but some Asian scrap market participants are not sure how long that absence will last, especially as China's slower winter demand season takes hold.
Most steel products in China are priced higher than seaborne levels, keeping its supply at home and even turning interest to steel imports to China. That price strength sent China's steel exports to a six-month low in August, down by 15pc on the year, with year-to-date exports down by 4.4pc to 44.97mn t.
But at the same time, China is the world's fastest-growing steel producer, with crude steel output on pace to reach nearly 1bn t in 2019, under a 9.1pc growth rate through August national bureau of statistics data show.
China is expected to impose flexible output restrictions during its November-March winter season, a time when construction demand slows and steel inventories soar to annual peaks in February-March. The looser restrictions and slowdown in sales, as well as intact profit margins keeping supply on line, could send China's steel markets into oversupply.
When China's domestic markets are oversupplied, exports are its only course of action. The last time China pivoted back to exports, it put enormous pressure on prices for steel and its raw materials.
When China's steel exports surged by 24pc to a record 110mn t in 2015, global ferrous prices plunged to multi-year lows.
The Argus HMS 1/2 80:20 scrap cfr Turkey assessment fell to a five-year low of $170/t cfr in October 2015. Two months later, the Argus ICX 62pc iron ore fines index fell to an all-time low of $37.30/dry metric tonnes (dmt) cfr Qingdao, and the fob China rebar price fell to $247.50/t fob.
By comparison, today the fob China rebar price is $432/t, 75pc higher than the 2015 low, and the Argus ICX is at $92.90/dmt, 149pc higher than 2015. But Turkish scrap at $235/t yesterday was only 38pc higher than the 2015 low, reflecting the extent to which the scrap market has fallen sharply over the past two months despite a relative firmness to Chinese pricing.
Seaborne ferrous scrap markets will crash if China starts to export more steel, a major scrap trader in northern Asia said.
Asia-Pacific ferrous scrap markets are already facing pressure from increased supply of semi-finished steel at lower prices.
Taiwan's domestic market rebar prices were at 14,400-14,500 New Taiwan dollars/t ex-factory ($468-471/t) this week, while local billet was priced at NT13,000/t ($422/t) delivered to customers and imported billet prices were heard to be around $400/t cfr Taiwan.
With the current import of overseas billet, Taiwanese mills face stiff competition for rebar sales with domestic re-rollers, which is the reason why mills are trying hard to keep scrap prices low.
A scrap-based mill has costs of around $160/t to turn imported scrap into steel. With Taiwanese containerised scrap import costs at $223/t cfr Taiwan, that is close to re-rollers' costs of roughly $400/t to make rebar.
If China or other regions export more semi-finished steel to Taiwan, its local mills that do not use imported billet will have to further cut costs and prices.
China's mills have been aggressive in export markets whenever they have firmly turned their attention overseas. Chinese domestic profit margins remain intact and could subsidise less profitable export sales, unlike in 2015 when its mill margins turned negative.
But China has fewer options for overseas exports than in 2015-16, as many countries have since added more trade protection measures, which means that competition could be even more fierce in the Asian markets that are still viable targets.
Related news posts
Hydro invests in metal recycling plant at Hoyanger
Hydro invests in metal recycling plant at Hoyanger
London, 22 April (Argus) — Norwegian aluminium producer Hydro has invested 240mn kroner ($21.8mn) in a new recycling facility alongside its primary aluminium smelter in Hoyanger, Norway. The recycling plant will process 36,000 t/yr of post-consumer aluminium scrap, as Hydro moves towards its 2030 target of reducing its emissions by 30pc compared with 2018 levels. The new facility will process scrap metal from vehicles, building facades, furniture, packaging and other consumer goods, which will be mixed with primary metal made with renewable hydropower at the Hoyanger plant. Among Hydro's low-carbon aluminium products is the Circal brand of aluminium, which is made with 75pc recycled content, and the Reduxa brand, which is made with renewable energy and generates emissions of less than 4kg CO2/kg aluminium produced. They are key to the company's emission reduction targets and ultimately reaching net zero by 2050. "Recycling is the fastest way to zero. With this new facility, we deliver on our strategy to increase recycling capacity in our efforts to decarbonise our own production processes and make products that the world needs for the green transition," the executive vice-president of Hydro's aluminium metal business, Eivind Kallevik, said. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Baltimore opens third temporary shipping channel
Baltimore opens third temporary shipping channel
New York, 22 April (Argus) — A third temporary shipping channel has opened at the Port of Baltimore to allow more vessel traffic around the collapsed Francis Scott Key Bridge. Located on the northeast side of the main channel, the new passage has a controlling depth of 20-ft, a 300-ft horizontal clearance, and a vertical clearance of 135-ft. When combined with two other temporary channels opened earlier this month the port should be able to handle "... approximately 15 percent of pre-collapse commercial activity," said David O'Connell, the federal on-scene coordinator. The main shipping channel of the Port of Baltimore — a key conduit for US vehicle imports and coal exports — is expected to be reopened by the end of May, the Maryland Port Administration said earlier this month. The bridge collapsed into the water late last month when the 116,851dwt container ship Dali lost power and crashed into one of its support columns. Salvage teams have been working ever since to remove debris from the water and containers from the ship in order to clear the main channel. By Stephen Cunningham Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
China's Lopal starts first Indonesian LFP battery plant
China's Lopal starts first Indonesian LFP battery plant
Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
International Graphite gets Western Australia funding
International Graphite gets Western Australia funding
Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more