Sabah tightens movement control, palm impact unclear

  • Market: Biofuels
  • 28/09/20

Malaysia's Sabah state will tighten movement restrictions across four districts for 14 days starting at midnight on 28 September, aimed at curbing Covid-19 transmission after a surge in recent infections.

All business activities except for essential services must stop from 29 September-12 October. It was not immediately clear whether palm oil plantations were exempt from closure.

The move comes after Lahad Datu, Tawau, Kunak and Semporna administrations confirmed 1,195 cases of Covid-19 in total between 1-27 September, according to Malaysia's ministry of health.

The palm industry was granted permission to resume operations ahead of many other businesses during the first wave of blanket movement control orders in April.

Residents and visitors will also not be permitted to travel in or out of the restricted areas while the tighter controls are in place.

Malaysia's police force, army, civil defense force will assist local authorities to control the area throughout the duration of the restrictions.

Palm oil production in Sabah accounts for 25pc of Malaysia's total crude palm oil output, which stood at 19.9mn t in 2019.

Markets were awaiting further clarification on the palm industry's status and did not fluctuate much following the announcement. Third-month crude palm oil futures gained slightly after the news to close the day at 2,822 ringgit/t ($676/t), up from lows of 2,750 ringgit/t before the announcement at 3:15pm.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
26/04/24

EU adopts Net-Zero Industry Act

EU adopts Net-Zero Industry Act

London, 26 April (Argus) — Members of the European Parliament (MEPs) have adopted Net-Zero Industry Act, which plans to allocate funds towards the production of net-zero technologies. The act provides a pathway to scale up development and production of technologies that are critical towards meeting the EU's recommendation of net-zero greenhouse gas (GHG) emissions by 2050. This would include solar panels, electrolysers and fuel cells, batteries, heat pumps, onshore and offshore wind turbines, grid technologies, sustainable biomethane, as well as carbon capture and storage (CCS). The act is designed to help simplify the regulatory framework for the manufacture of these technologies in order to incentivise European production and supply. It also sets a target of 40pc production within the EU for its annual "deployment needs" of these technologies by 2030. Time limits will be instated on permit grants for manufacturing projects, at 12 months if the manufacturing capacity is under 1 GW/yr and 18 months for those above that. It will introduce time limits of nine months for "net-zero strategic projects" of less than 1 GW/yr and 12 months for those above. This is further complemented by the introduction of net-zero strategic projects for CO2 storage, to help support the development of CCS technology. The act was met with positive reactions from the European Community Shipowners' Association (ECSA), which said the bill will set the benchmark for member states to match 40pc of the deployment needs for clean fuels for shipping with production capacity. ECSA said the Net-Zero Industry Act will be instrumental in supporting the shipping industry to meet targets set under FuelEU Maritime regulations , which are set to come into effect next year. By Hussein Al-Khalisy Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

New technologies aim to boost SAF production


26/04/24
News
26/04/24

New technologies aim to boost SAF production

London, 26 April (Argus) — A likely rise in global demand for sustainable aviation fuel (SAF), underpinned by mandates for its use, is encouraging development of new production pathways. While hydrotreated esters and fatty acids synthesised paraffinic kerosine (HEFA-SPK) remains the most common type of SAF available today, much more production will be needed. The International Air Transport Association (Iata) estimated SAF output at around 500,000t in 2023, and expects this to rise to 1.5mn t this year, but that only meets around 0.5pc of global jet fuel demand. An EU-wide SAF mandate will come into effect in 2025 that will set a minimum target of 2pc, with a sub-target for synthetic SAF starting from 2030. This week the UK published its domestic SAF mandate , also targeting a 2pc SAF share in 2025 and introducing a power-to-liquid (PtL) obligation from 2028. New pathways involve different technology to unlock use of a wider feedstock base. US engineering company Honeywell said this week its hydrocracking technology, Fischer-Tropsch (FT) Unicracking, can be used to produce SAF from biomass such as crop residue or wood and food waste. Renewable fuels producer DG Fuels will use the technology for its SAF facility in Louisiana, US. The plant will be able to produce 13,000 b/d of SAF starting from 2028, Honeywell said. The company said its SAF technologies — which include ethanol-to-jet , which converts cellulosic ethanol into SAF — have been adopted at more than 50 sites worldwide including Brazil and China. Honeywell is part of the Google and Boeing-backed United Airlines Ventures Sustainable Flight Fund , which is aimed at scaling up SAF production. German alternative fuels company Ineratec said this week it will use South African integrated energy firm Sasol's FT catalysts for SAF production. The catalysts will be used in Ineratec's plants, including a PtL facility it is building in Frankfurt, Germany. The plant will be able to produce e-fuels from green hydrogen and CO2, with a capacity of 2,500 t/yr of e-fuels beginning in 2024. The e-fuels will then be processed into synthetic SAF. Earlier this month , ethanol-to-jet producer LanzaJet said it has received funding from technology giant Microsoft's Climate Innovation Fund, "to continue building its capability and capacity to deploy its sustainable fuels process technology globally". The producer recently signed a licence and engineering agreement with sustainable fuels company Jet Zero Australia to progress development of an SAF plant in north Queensland, Australia. The plant will have capacity of 102mn l/yr of SAF. Polish oil firm Orlen formed a partnership with Japanese electrical engineering company Yakogawa to develop SAF technology . They aim to develop a technological process to synthesise CO2 and hydrogen to form PtL SAF. The SAF will be produced from renewable hydrogen as defined by the recast EU Renewable Energy Directive (RED II) and bio-CO2 from biomass boilers, Orlen told Argus . By Evelina Lungu Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

UK publishes SAF mandate, targets 22pc by 2040


25/04/24
News
25/04/24

UK publishes SAF mandate, targets 22pc by 2040

London, 25 April (Argus) — The UK will mandate the supply of sustainable aviation fuel (SAF) from next year, targeting a 2pc share in 2025, which equates to around 230,000t of SAF according to the government, and increasing the obligation annually to 10pc in 2030, 15pc in 2035 and 22pc in 2040. The obligation, which falls on the jet fuel supplier, will remain at 22pc from 2040 until it is reviewed and updated, the UK said. The mandate is subject to parliamentary approval. An EU-wide SAF obligation is also due to come into effect next year, targeting a 2pc SAF share in 2025, increasing to 6pc from 2030, 20pc from 2035, 34pc from 2040, 42pc from 2045 and 70pc in 2050. Under the new UK mandate, hydrotreated esters and fatty acids (HEFA) SAF can be used to meet 100pc of SAF demand in 2025 and 2026, but it will be capped at 71pc in 2030 and 35pc in 2040. HEFA is the most common type of SAF today, and is expected to account for over 70pc of global production by the end of the decade, according to Argus data. An obligation for Power-to-Liquid (PtL) SAF will be introduced from 2028 at 0.2pc of total jet fuel demand, rising to 0.5pc in 2030 and 3.5pc in 2040. The EU is targeting a 1.2pc share of synthetic aviation fuels in 2030, rising to 2pc in 2032, 5pc in 2035 and 35pc in 2050. To be eligible under the mandate, SAFs must achieve minimum greenhouse gas (GHG) reductions of 40pc compared with a fossil fuel jet comparator of 89g CO2e/MJ, and must be made from sustainable wastes or residues, such as used cooking oil or forestry residues. SAF from food, feed or energy crops is currently not eligible for support under the scheme, the government said. PtL SAF will need to be produced from low carbon — renewable or nuclear — electricity. Recycled carbon fuels (RCF) from feedstocks like unrecyclable plastics can also be used to meet the obligation. Hydrogen, whether used as fuel precursor or as final fuel, must be bio-hydrogen from wastes and residues, RCF hydrogen or derived from low carbon energy. The mandate will also introduce tradeable certificates for the supply of SAF, with additional certificates awarded for fuels with higher GHG emissions savings. There will be three types of certificates: PtL, standard and HEFA. Buy-out mechanisms will be set at the equivalent of £4.70/l and £5.00/l for the main and PtL obligations, respectively. Formal reviews of the mandate will be conducted and published at least every five years, with the first to be carried out by 2030, the government said. The mandate will be separate from the country's Renewable Transport Fuel Obligation (RTFO). In tandem with the publication of the SAF mandate, the government launched a consultation on four options for an SAF revenue certainty scheme aimed at guaranteeing revenue from SAF and support production in the country. The UK previously said it aims to introduce the mechanism, which will be industry funded, by the end of 2026 . The consultation includes a preferred option for a "guaranteed strike price" (GSP), which would guarantee a pre-agreed price of SAF supplied into the UK market. By Giulia Squadrin Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Cepsa supplies HVO bunker fuel in Algeciras


24/04/24
News
24/04/24

Cepsa supplies HVO bunker fuel in Algeciras

London, 24 April (Argus) — Spanish refiner and bunker fuel supplier Cepsa has recently delivered 150t of 100pc hydrotreated vegetable oil (HVO) by truck to the Ramform Hyperion at the port of Algeciras. The supply follows market participants reporting firmer buying interest for HVO as a marine fuel from ferry lines in the Mediterranean in recent sessions. The supplied HVO is said to be of class II, with used cooking oil (UCO) as the feedstock. Cepsa added that the supply was completed in cooperation with Bunker Holding subsidiary Glander International Bunkering, and could bring about a greenhouse gas (GHG) emissions reduction of up to 90pc compared with conventional fuel oil. Cepsa will also look to obtain capability to supply marine biodiesel blends exceeding 25pc biodiesel content by the end of the year, delegates heard at the International Bunker Conference (IBC) 2024 in Norway. This also follows plans by Cepsa to build a 500,000 t/yr HVO plant in Huelva , set to start production in the first half of 2026. Argus assessed the price of class II HVO on a fob Amsterdam-Rotterdam-Antwerp (ARA) basis at an average of $1,765.54/t in April so far, a premium of $906.41/t to marine gasoil (MGO) dob Algeciras prices in the same month. By Hussein Al-Khalisy Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

New ISO 8217 eyes wider scope for alternative fuels


24/04/24
News
24/04/24

New ISO 8217 eyes wider scope for alternative fuels

London, 24 April (Argus) — The 7th edition of ISO 8217, to be published in the second quarter of this year, will outline a broader integration of marine biodiesel blending, delegates heard at the International Bunker Conference (IBC) 2024 in Norway. Tim Wilson, principal specialist fuels of Lloyds Register's fuel oil bunkering analysis and advisory service (FOBAS), presented on the upcoming iteration of the ISO 8217 marine fuel specification standard, which will be released at IBC 2024. The new edition will incorporate specification standards for a wide range of fatty acid methyl ester (Fame)-based marine biodiesel blends up to B100, 100pc hydrotreated vegetable oil (HVO), as well as synthetic and renewable marine fuels. This will also include additional clauses to cover a wider scope, and briefly touch on biodiesel specifications that do not entirely align with road biodiesel EN-14214 specifications. This follows the emergence of widening price spreads for marine biodiesel blends because of specification differences and the lack of a marine-specific standard for the blends. The new edition of ISO 8217 is also expected to remove the limit of 7pc Fame when blended with distillate marine fuels such as marine gasoil (MGO) which was in place in the previous ISO 8217:2017. Other changes to distillate marine biodiesel blends include changes to the minimum Cetane Index, oxidation stability alignment to be connected to either ISO 15751 for blends comprising 2pc or more of Fame biodiesel and ISO 12205 for blends comprising a Fame component of under 2pc. Cold-filter plugging point (CFPP) properties will be determined by the vessel's fuel storage tanks' heating capabilities and requirements will be set in place to report the CFPP for distillate marine biodiesel grades, according to the new edition of the marine fuel specification standard. Wilson said that a minimum kinematic viscosity at 50°C will be in place for various forms of residual bunker fuel oil along with a viscosity control alerting suppliers to inform buyers of the exact viscosity in the supplied fuel. He said they have seen delivered fuel viscosity come in at much lower levels than ordered by the buyers, which was the reasoning behind the viscosity control monitoring requirement. By Hussein Al-Khalisy Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more