Anglo American touts Peru copper mine innovation

  • Market: Metals
  • 18/06/21

Anglo American is touting the innovation of its $5.5bn copper mine in Peru, where a left-wing political novice historically critical of extractive industries is close to becoming the country's next president.

London-headquartered Anglo American is about a year out from starting production on the 300,000 t/yr Quellaveco mine, the firm's largest greenfield project worldwide and its showcase for "smart mining".

"What we are doing here is showing how mining will be done in the future. Quellaveco is going to be a turning point," Anglo American Peru chief executive Tom McCulley told Argus.

Quellaveco, in the southern Moquegua region, ticks many of the boxes that rural schoolteacher Pedro Castillo, who is close to being declared winner of a 6 June presidential run-off, talked about on the campaign trail, including technology, environmental focus and relations with local communities.

Castillo stressed that mining would not be permitted in places where communities oppose it, specifically calling out Tia Maria, planned by Mexico's Southern Copper, and Minas Conga, belonging to-US based Newmont. Tia Maria development has been suspended since 2009, Conga since 2011.

Quellaveco will be the first mine in Peru, and the largest of Anglo American's mines worldwide, that will be fully powered by renewable energy, and the country's first completely digital mine.

In an agreement with France's Engie, Quellaveco will be powered with 187MW from a 260MW wind farm under construction in Ica to the north. Quellaveco will export copper from a terminal that Engie built years ago to bring in coal for a thermal power plant it operated in Ilo. That plant is now closed.

Quellaveco currently has five 327t autonomous or driver-less mining trucks and will eventually get to 30 trucks, Anglo American's first fully autonomous fleet.

"All of the information is integrated, from water reservoirs nearly 5,000m above sea level to the port in Ilo we will use to ship copper. We can see all the data, interpret it and make decisions in real time," said general manager Tito Cacho.

Quellaveco will become a technological hub for Peruvian mining and a trailblazer for the wider Andean region, Anglo American says.

Peru is the world's second largest copper-producing country after southern neighbor Chile.

The most ambitious part of Quellaveco so far may be water sustainability. While there have been some grumblings about its environmental footprint, Quellaveco has been free from social protests and is not among projects monitored by local mining-watch non-profit groups concerning water rights and other environmental concerns. Quellaveco is also not among the 60 active mining conflicts the government's ombudsman's office was following in May.

The mine will obtain 80pc of its water, or 18mn m3, from the volcanic-fed Titire river high in the Andes. The river has natural toxic concentrations of boron and arsenic, off limits for human consumption and agriculture, but suitable for mining. The remaining 20pc will come from rainwater – it has 1.4mn m3 of stored rainwater – and the Asana river, which has been channeled and diverted around the mine. A key component is the 60m m3 Vizcachas dam. Quellaveco will use 4mn m3, with the rest provided to local farming communities.

The community plan, including the water-use strategy, was initially approved in 2012 after more than 18 months of negotiations.

"If I look at all of the mines I have seen in the world, this is the first that I can say has followed a sustainable approach from the start. We are investing $400mn to protect water and the environment. This is unheard of in our industry," said McCulley.

Quellaveco has 1.3bn t of ore reserves containing 7.5mn t of copper with a 0.57pc grade, and a minimum mine life of 30 years.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/24

Europe plate: Imports weigh on EU prices

Europe plate: Imports weigh on EU prices

London, 28 March (Argus) — Plate prices in Europe tumbled this week on increased import activity, which has pushed European producers to adjust their offers down to remain competitive. The Argus fortnightly Italian plate assessment dropped by €22.50/t to €730/t ex-works today for S235 grades, while the northwest European plate assessment for the same specifications also dropped by €15/t to €765/t. In the south, for S275 material, re-rollers were heard quoting €740-750/t to small customers, with €720-730/t possible for larger volumes. The market remained split between suppliers willing to drop to the low €700s/t to collect orders, and others that preferred to remain firm at €740-750/t and wait for after the Easter holidays to see how the market develops. Two re-rollers confirmed this week that they are mulling extending their Easter break by a few days owing to weak purchasing activity in the market. The level of €710/t ex-works for S275 was also reported available for orders of 1,000t and above, but this could not be verified. Buying activity over the past two weeks remained poor, as market participants are purchasing what they need with no restocking activity occurring. A slight drop in slab prices has contributed to lower plate prices. Deliveries for the Italian domestic market remain for late April for commodity grades. To the rest of Europe, Italian producers were heard offering around €750/t on a ex-works basis for S235 material, without collecting any tonnage. One source said there were offers as high as €760-770/t ex-works Italy. In northern Europe, one mill was reported concluding sales to end-users working in the shipbuilding industry at €750-770 ex-works for S355 grades. The same producer tabled offers at around €780/t, but was quick to offer discounts. Orders from the supplier are expected to be delivered in six to seven weeks. One source estimated that for S235, integrated mills would be offering close to €780-800/t ex-works, while from re-rollers located in the Benelux area €750/t ex-works for the same grade could be easily achieved. One central European mill was also heard available to sell at €790-810/t ex-works for S235. Producers in the northwest are operating on April to May delivery depending on the mill and the product requested. Market participants agree that a rebound in market activity is only expected towards the latter part of April. On imports, over the past couple of weeks, Indonesian material was purchased by buyers across the continent, especially in southern Europe at €640/t cif levels for S275. One source estimated that sales from Indonesia totalled close to 60,000t over the past month. After this activity, Indonesian material was not reported available over the past seven days. One deal was also concluded this week at €710/t cfr north EU, for South Korean S355 material. From South Korea, offers for S275 were estimated over the €660/t cif Italy level this week, with no deals concluded. Indian material was offered at $710-720/t cfr Italy for S275, while one trader offered the same origin from port, free on truck at €730/t for S355. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

Turkey rebar: Market muted ahead of elections


28/03/24
News
28/03/24

Turkey rebar: Market muted ahead of elections

London, 28 March (Argus) — Turkish rebar prices were stable today, without a great deal of urgency shown by export buyers following a sustained uptick in scrap prices over the past few days. The domestic market remained subdued, as construction demand is still constrained by high borrowing costs and the ongoing depreciation of the domestic currency. Argus ' daily Turkish export assessment for rebar was unchanged at $590/t fob, with larger cargoes still available at this level. European, mostly Balkan, buyers have been making enquiries this week, with scrap prices inching steadily upwards over the past three weeks. But buyers have mostly been checking prices, and trade has remained thin. Rebar indications from suppliers were in a $590-605/t fob range, with most suppliers expecting at least $595/t fob. In the wire rod segment, material was available in a range of $605-625/t fob. The weekly wire rod assessment increased by $5/t to $600/t fob Turkey. In the domestic market, offers from most mills in the Marmara and Iskenderun regions were firm in a range of $610-620/t ex-works excluding value-added tax (VAT). But material remains available from Izmir mills and one Marmara mill at $595-600/t ex-works. While some buyers have made purchases in the run-up to the municipal elections on 30 March, restocking has been lacklustre, with a lack of firm signals from the construction sector. Argus ' daily Turkish domestic rebar assessment was unchanged at $600/t ex-works excluding VAT, with the lira equivalent also unchanged at TL23,4000/t ex-works including VAT. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Taiwan scrap imports fall 13pc on year in February


28/03/24
News
28/03/24

Taiwan scrap imports fall 13pc on year in February

Singapore, 28 March (Argus) — Taiwan's ferrous scrap imports fell on the year in February, reflecting rising prices, subdued activity during the holiday period and high stocks. Ferrous scrap imports totalled 218,887t, down by 21.3pc on the month and 13.2pc on the year, customs data showed. Trade sources attributed the decline to rising seaborne scrap prices in November and December. Trade sources said lower bookings were expected given the lunar new year holiday in Taiwan on 8-14 February, with mills likely to have been prudent in their procurement since November as delivery of containerised scrap usually takes 8-10 weeks from the signing of an agreement. The US remained Taiwan's top ferrous scrap supplier in February, providing 81,249t, although this was down by 32.6pc on January and 25.1pc on the year. Ferrous scrap imports from Japan fell by 10.3pc on the month and 15pc on the year to 55,510t in February. Imports from Dominican Republic rose by 7.1pc on the month and 16.9pc year on year to 17,563t. Scrap supply from Australia fell by 47.8pc year on year to 9,921t. Trade sources said underwhelming fundamentals in Asia meant Australian sellers focused on south Asia, where they could achieve stronger margins. Looking ahead, a slowing construction sector could mean lower scrap imports. "The shortage of manpower and rising building material costs have impacted the initiation pace of new construction projects," the Taiwan Institute of Economic Research said on 25 March. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s SMM eyes Li-ion battery recycling plant by 2026


28/03/24
News
28/03/24

Japan’s SMM eyes Li-ion battery recycling plant by 2026

Tokyo, 28 March (Argus) — Japanese battery cathode producer Sumitomo Metal Mining (SMM) plans to set up a lithium-ion (Li-ion) battery recycling plant in western Japan's Ehime prefecture by June 2026. The recycling plant is expected to have a processing capacity of around 6,000-7,000 t/yr of black mass, equivalent to batteries for around 60,000 electric vehicles, a company representative told Argus on 28 March. Black mass is the shredded remains of cathode materials such as nickel, cobalt and lithium. The company will start construction sometime during March-April 2025, but the timing for commercial operations was undisclosed. SMM has also entered into a partnership with nine domestic recycling partners to build a supply chain for collecting used Li-ion batteries, the company representative added. SMM produced cathodes using nickel and cobalt from recycled Li-ion batteries in June 2023. Domestic battery producer Prime Earth EV Energy proved the quality of SMM's used cathodes in performance testing. The recycled ratio of nickel and cobalt used in the test was more than 6pc and 16pc respectively. This exceeds the standard rates that EU battery regulations tentatively set as minimum recycling requirements for each material, a SMM representative previously told Argus . The EU regulation is expected to take effect from 2031 after approvals by member countries. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Centaurus' Jaguar Ni mine in Brazil eyes 2027 output


28/03/24
News
28/03/24

Centaurus' Jaguar Ni mine in Brazil eyes 2027 output

Singapore, 28 March (Argus) — Australian mining company Centaurus Metals said that its Jaguar nickel sulphide project in Brazil is undergoing a feasibility study and aims to start production in mid-2027. Jaguar, bought from Brazilian mining firm Vale in 2020 , is estimated to hold 109mn t of 0.87pc grade nickel for an estimated 948,900t of contained nickel. The nickel product will be largely targeted at the Atlantic market, with expectations that demand will strengthen in the region. "Demand for nickel we believe is not going away. And if you look at what's going to happen in the US and European markets in particular, nickel will probably be a bigger part of the battery composition than anywhere else," Centaurus' managing director Darren Gordon said at the Tribeca Futures Commodities conference held in Singapore on 26 March. "There's a huge amount of nickel that still needs to come into the market." Many Australian mining firms have struggled with a slump in global nickel prices earlier in the year because of a supply glut caused by increased volumes from Indonesia, coupled with a slowdown in demand. Several Australian mines have halted operations , while other processing facilities were placed on care and maintenance programmes . But Centaurus is hopeful that Jaguar will be able to compete on a cost and environmental basis with Indonesian supplies. "Nickel is going to continue be supplied out of Indonesia in very large ways so we are going to compete on costs. And we think that when we deliver the feasibility study, we will be able to demonstrate that we can compete on costs. But overlay on that, we have this very low carbon footprint associated with our project," Gordon added. Centaurus said Jaguar is one of the lowest carbon footprint nickel project globally, following a review done by a metals and mining ESG research company. Once operational, greenhouse gas emissions from the project are forecast to be 7.27t of carbon dioxide/t of nickel equivalent, which is assessed to be lower than 94pc of other global nickel production. By Sheih Li Wong Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more