US auto workers launch strikes at three plants

  • Market: Metals, Petrochemicals
  • 15/09/23

The United Auto Workers (UAW) union began a historic strike early this morning targeting three assembly plants in the Midwest, positioning US steel prices for potential downside.

The strikes started at midnight at one plant across each of the Big 3 automakers, including the final assembly and paint portion of the Ford assembly plant in Wayne, Michigan; the General Motors (GM) Wentzville, Missouri, assembly plant; and the Stellantis Toledo, Ohio, assembly complex. The three sites represent 13,000 workers total of the UAW's 150,000 members.

The UAW's "stand up" strike strategy is systematically focused on targeting a rolling list of facilities while other union members continue to report to work — a tactic aimed at spurring negotiations rather than paralyzing each of the automakers.

Plants targeted in the first round make midsize pickup trucks, SUVs and vans, some of the companies' most profitable products but are not critical component plants that would shut down production entirely across the companies. But the union intends to strike at additional plants if negotiations stall.

The duration of the strikes is difficult to determine as the parties remain far apart on their terms, but the scale could be economically devastating for the automakers and industries feeding the auto supply chain. All three contract counter proposals presented to the UAW late last night were rejected.

Steel price sentiment mixed

Many market participants surveyed by Argus expect to see steel prices drop relatively quickly in reaction to the strike, as soon as within the next 1-2 weeks for automotive-grade bar and flat-rolled steel products.

For hot-rolled coil (HRC), some expect spot prices to fall in the low $600/st range, levels heard recently for larger-tonnage volumes.

Still, others do not think prices have much further room to go down because of how compressed margins are now.

HRC prices have been gradually falling in recent months with HRC at $690/st earlier this week, down by 43pc from their peak in April.

Meanwhile, ferrous scrap prices will also likely be negatively impacted as tighter mill margins and any further decrease in demand will prompt mills to pass through drops. That said, obsolete grade scrap supply in the US has been thinly balanced and export activity in recent month has been robust, which could help shield these grades from as much downside as primes.

In the September US domestic trade primes fell $40-50/gt while obsolete grades were sideways, bringing #1 busheling and shred pricing in some major markets including Detroit and Birmingham in parity.

But if primes fall too much it will likely leave obsolete prices exposed to downside risk until the strike ends.

If a new deal is reached and confidence in the auto industry is restored, prices could see a spike like those seen in 2021 after post-Covid-19 led to a brief stop in production, followed by a surge in demand.

Duration uncertain

It is difficult to estimate the length of the strike or workers' resolve to remain on the picket lines. Like the Writers Guild of America strike that has been going for 130 days, the UAW dispute with the automakers seeks to address major industry shifts due to technology — namely the shift to building more electric vehicles.

The union is also calling for a 40pc increase in wages, which automakers' are no where near offering in their counter-offers.

The last major US auto worker strike was in 2019, when UAW workers at General Motors went on a six-week-long-strike. That was the longest for the auto industry in 50 years, the UAW said at the time.

In Canada Unifor, the union representing auto workers in the country, has chosen Ford as its strike target, following the more traditional path of targeting a single automaker during contract negotiations. That union's current contract expires at 11:59pm ET on 18 September.

Possible impacts from US auto stirkeshort tons (st)
CompaniesVehicle manufactured/month (US)Steel consumption/monthAluminum consumption/monthCopper consumption/month
Ford177,221175,44943,0654,431
GM230,659228,35256,0505,766
Stellantis144,883143,43435,2073,622
Total552,763547,235134,32113,819
Figures are likely an underesimate.

Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
09/05/24

Jakarta forum calls for exploring Ni price references

Jakarta forum calls for exploring Ni price references

Singapore, 9 May (Argus) — The global nickel market should explore different price references for nickel products to reduce price uncertainty, panellists said at the Third Nickel Producers, Processors and Buyers Conference in Jakarta, Indonesia. The London Metal Exchange (LME) nickel price, which is the global benchmark for class 1 nickel products, has been volatile for years now since LME suspended nickel trading in early March 2022, when prices surged above $100,000/t overnight. There were hopes late last year that prices would become more stable this year. But the price outlook has been uncertain since the turn of the year, with class 1 prices on the London Metal Exchange (LME) slumping to a four-year low of $15,877.50/t on 6 February on expectations of weak Chinese stainless steel and electric vehicle demand, before rebounding to a six-month high of $19,387.50/t on 26 April because of a delay in Indonesian RKAB mining right approvals and a reviewed forecast suggesting a significant smaller surplus for this year. There should be a new reference to counter price volatility, some conference participants said, while others suggested decoupling class 1 and 2 nickel prices. "[Prices are volatile now because] most prices are referenced to class 1, so maybe we can explore further with more price references, like class 2 nickel pig iron (NPI) and mixed hydroxide precipitate (MHP)," Ray Gunara, president-director of Indonesian coal producer Harum Energy, said on 7 May. Harum Energy this year bought a majority stake in an Indonesian nickel processing and refining business. Most conference participants agreed that a different price reference would help maintain nickel price stability. "[NPI prices now are] difficult to predict because the class 1 [prices] are no longer linked to the product we are selling," Indonesia miner Trimegah Bangun Persada (Harita Nickel)'s president-director Roy Arman Arfandy said. Indonesia is the world's largest nickel producer. The correlation between the monthly average of the LME class 1 cash official price and Argus ' NPI ex-works China index has fallen to close to 0.41 between January and May, from 0.91 in 2023. The correlation between the LME class 1 cash official price and Argus ' class 2 nickel benchmark Indonesian Nickel Index (INI) for 10-14pc NPI fob Indonesia was 0.52 between January and May. Market participants at the conference also expressed hope for more government support. "Currently there is an imbalance between local and foreign investments, so we are hoping that the government can give more support to local players like us," one producer said. Another conference participant said that they would aim to build a precursor cathode active material plant if given more support. Argus ' class 2 nickel INI for 10-14pc NPI fob Indonesia stood at $118.70/mtu on 3 May. The INI for 37pc MHP was at $142.80/mtu fob Indonesia and 70pc matte was at $148.90/mtu fob Indonesia on the same day. By Sheih Li Wong Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

Japan’s scrap export tender extends gains for May


09/05/24
News
09/05/24

Japan’s scrap export tender extends gains for May

Shanghai, 9 May (Argus) — The monthly export tender of Japanese scrap dealer co-operative Kanto Tetsugen continued its upwards trend in May, propelled by a favourable currency exchange rate. The May tender was concluded at ¥52,590/t fas for 20,000t of H2 scrap on 9 May, an increase of ¥1,503/t from April. This brought the fob price to an equivalent of ¥53,590/t or $344.60/t. Two cargoes were settled on 9 May, one of 15,000t and another of 5,000t, both at the same price. Some market participants anticipated the first would go to Bangladesh, as in recent months, while some market discussions were suggesting both were destined for Vietnam. The Vietnamese domestic steel market has shown more signs of a recovery since mid-April. The renewed increase in the export tender was mainly driven by the depreciation of the yen. Despite the significant increase in the tender result, the equivalent price in US dollars only rose by around $1/t compared with the previous month. The yen weakened to ¥155.70 to the dollar from ¥151.80 on 10 April. The Argus H2 fob Japan assessment was ¥50,800/t on 8 May, while the April monthly average was ¥50,757/t fob Japan. Tokyo Steel following the Kanto tender raised the collection price at its Utsunomiya plant by ¥1,000/t and maintained prices at other plants. The increase in the tender result and domestic prices in the Kanto region will raise suppliers' target levels for export business. But overseas buyers may require more time to absorb the gain and await further rises in steel sales prices, a market participant said. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Hybrid vehicles spur Toyota’s record 2023-24 profit


09/05/24
News
09/05/24

Hybrid vehicles spur Toyota’s record 2023-24 profit

Tokyo, 9 May (Argus) — Japan's largest car producer Toyota reported a record profit for the 2023-24 fiscal year ending 31 March, partially because of strong sales of hybrid electric vehicles (HEVs). Toyota nearly doubled its profit for 2023-24 to ¥5.3 trillion ($34bn), its highest ever for a fiscal year. It sold 11mn vehicles globally, including its luxury brand Lexus, up by 7.3pc from a year earlier. The sharp rise in profit partly resulted from higher demand for HEVs that Toyota sold 3.6mn units of globally, up by 32.1pc from the previous year. North America was the leading market for its HEV sales, said the company's chief financial officer Yoichi Miyazaki, but a further breakdown was undisclosed. Firm demand for HEVs, for which Toyota has both technological and commercial advantages given its long history of development and experience, has largely been prompted by a global slowdown in battery electric vehicle (BEV) sales. HEVs consume significantly less battery materials compared with BEVs, as their battery size is normally 10pc of a BEV. Toyota is accelerating HEV production during 2024-25, as it plans to increase sales by 24.5pc from a year earlier to 4.5mn units. This accounts for 43pc of the company's total sales projection and is up by around 8 percentage points from a year earlier. The global slowdown in BEV sales could mean customers are being sceptical about the overstated view that BEVs are the only solution for decarbonisation, said Toyota's chief executive Koji Sato, adding that the infrastructure necessary for driving BEVs, including charging stations, has not yet adequately developed. But he was unclear on whether Toyota will slow its EV strategy that it announced last year to sell 1.5mn/yr of EVs by 2026 with 10 new models. The company plans to sell 171,000 BEVs during 2024-25, accounting for 1.6pc of its total sales projections. This is up by 46.2pc from a year earlier but the projection is based on "conservative estimations", according to Sato. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Polymers stocks safe in storm-hit Brazil: Braskem


08/05/24
News
08/05/24

Polymers stocks safe in storm-hit Brazil: Braskem

Orlando, 8 May (Argus) — Brazilian petrochemical giant Braskem said its polymer inventories are safe and protected from the damage caused by heavy rainfall at its operations in southern Brazil during the past two weeks. The inventories include polyethylene (PE), polypropylene (PP), ethylene and basic chemicals. Braskem had to shutdown all of its operations in Rio Grande do Sul state after the extreme weather event in recent days , the company told Argus on Wednesday, on the sidelines of the NPE Plastics fair in Orlando, Florida. The shutdown was completed safely, with no harm to the company's plants at the Triunfo petrochemical hub, which represents about 30pc of its ethylene production capacity in Brazil. Braskem is reevaluating its supply chain strategy to deal with the lack of production at the Trinfo hub. This includes serving its clients with PE produced at other company hubs in Brazil and Mexico, where it owns PE manufacturing joint venture Braskem Idesa. The same goes for PP and polyvinyl chloride (PVC), with other production hubs serving customers if the weather situation does not improve in the coming days. Operations at Braskem's 260,000 t/yr bio-based PE plant will restart as soon as conditions improve, the company said. No fatalities occurred at the company's operations, but part of its workforce has lost their homes and are being taken care of by Braskem, according to the company. State governor Eduardo Leite called the the flooding "the worst disaster in Rio Grande do Sul's history." There are 100 people dead and 128 missing, according to the state's civil defense. Braskem said it will resume its operations gradually, after weather conditions normalize and logistics in the state such as airports, railroads and flooded roads resume. Braskem is the largest producer of thermoplastic resins in the Americas and a leader in biopolymer production. By Frederico Fernandes Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japanese ethylene producers unite for decarbonization


08/05/24
News
08/05/24

Japanese ethylene producers unite for decarbonization

Tokyo, 8 May (Argus) — Japanese petrochemical producers Mitsui Chemicals, Mitsubishi Chemical and Asahi Kasei have agreed to co-operate on decarbonization of their ethylene crackers in west Japan, targeting to decide a pathway within the current April 2024-March 2025 fiscal year. They plan to accelerate carbon neutrality at Mitsubishi Chemical and Asahi Kasei's 496,000 t/yr Mizushima cracker in Okayama prefecture and Mitsui Chemicals' 455,000 t/yr Osaka cracker in Osaka prefecture. The partners aim to introduce biomass feedstocks such as biomass-based naphtha and bioethanol and low-carbon cracking fuels like ammonia, hydrogen and electricity. They said joining forces will enable them to accelerate reducing greenhouse gas emissions, although they have not yet decided any further details. Mitsui Chemicals has experience in using bio-naphtha and recycled pyrolysis oil at its Osaka cracker. Japanese petrochemical producers have increasingly united to achieve decarbonization of their production processes, which account for around 10pc of the Japanese industrial sector's carbon dioxide emissions, according to the trade and industry ministry. Mitsui Chemicals, Sumitomo Chemical and Maruzen Petrochemical agreed to study the feasibility of chemical recycling and using bio-feedstocks at the Keiyo industrial complex in Chiba. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more