Light Al stockbuild reveals supply dearth

  • Market: Metals
  • 01/06/23

It is the time of year when aluminium markets are normally at their most active. As Europe warms in the spring, but before the traditionally slow summer period, automotive and construction activity often reaches its annual zenith in the second quarter.

But this year, markets are very quiet as demand has weakened throughout the year. But aluminium stock levels are not rising at nearly the rate that such low appetite would normally drive, revealing a thin supply outlook that could see prices and premiums rise swiftly in the event of any improvement in this demand. Domestic supply levels in Europe remain restricted after heavy cuts induced by high power prices.

On-warrant aluminium stocks started 2023 at relatively low levels following drawdowns late last year, but they more than doubled to 453,700t in the space of a week from 7 February and saw another significant delivery on 18 April, rising by 10.43pc to 500,300t. But levels have fallen since then, aided by a 130,000t cancellation on 11 May, although the drawdown of stocks between deliveries has slowed as end-user markets have weakened this quarter.

Additionally, a large portion of this warehouse stock is Russian metal, which western consumers are not willing to use. Russian metal has made up more than half of London Metal Exchange aluminium stocks at times this year, and further deliveries are likely from trading firms that have contracts to take Russian metal but no longer have willing buyers of the material.

"Demand is poor but aluminium is still more of a supply story," an analyst said. "The market is broadly balanced because any surplus is mostly Russian metal, which people do not want."

Construction markets in Europe are heavily depressed so far this year, while some packaging markets have also slowed significantly. Automotive markets have been stronger this year, but trading companies have noted a marked slowdown in recent weeks, with volumes for third-quarter deliveries under discussion falling significantly below the previous quarter.

But primary aluminium premiums have remained robust. The Argus weekly duty-paid P1020 ingot in-warehouse Rotterdam premium only fell for the first time on 10 May, to $280-300/t from $300-320/t previously, but still up from $250-270/t at the start of this year. Premiums remain well below 2022 peaks touching $600/t, but are still about double pre-pandemic levels and are not yet showing signs of decreasing further despite such low demand.

Western commodities markets in general are suffering from rising interest rates against high inflation, while China is also seeing low demand amid a slow recovery after lifting its zero-Covid-19 lockdown measures in the first quarter.

And the global supply issue persists. Chinese aluminium output fell on the month in April as power curbs in southwestern Yunnan province continued to hamper production. Energy-intensive industries in Yunnan have been instructed to cap production over the coming months, as lower-than-expected rainfall levels will continue to hit hydropower production.

In Europe, trading companies now do not expect any improvement in activity until September at the earliest, and yet suppliers are behaving as though the next significant shift in pricing and premium levels will be positive. There are no lowball offers in the market, and no significant stock-building. Indeed, much of the recent jockeying in stock levels has been attributed by some to large trading firms positioning for an industrial demand rebound.

"Traders still want to secure units for the European market," a European merchant said. "There are others with the opposite story, but some are very bullish."

If the Chinese arbitrage opens, allowing a margin for buying European units to sell into China, the tight supply picture in Europe would be squeezed further. And the likelihood of Chinese prices rising against the Yunnan supply restrictions and demand levels slowly improving is one that trading houses view with some confidence.

"The market is broadly balanced now, but things can get nasty if the Yunnan situation continues and the arbitrage opens," the analyst said. "It is not like there are millions of tonnes of stocks."

The more bullish trading companies are betting that tight supply markets will keep premiums and prices mostly stable even through an extended period of low demand flowing into the summer, while any subsequent improvement in demand will see a positive response in those premiums and prices.

"With Russian metal still sidelined, premiums will not fall much further," a second trading firm said. "We are stuck in a weak environment now, but when demand comes back, we will see what happens."


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

China's Lopal starts first Indonesian LFP battery plant


22/04/24
News
22/04/24

China's Lopal starts first Indonesian LFP battery plant

Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

International Graphite gets Western Australia funding


22/04/24
News
22/04/24

International Graphite gets Western Australia funding

Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Australia's QPM to focus on gas, cut Tech battery spend


22/04/24
News
22/04/24

Australia's QPM to focus on gas, cut Tech battery spend

Sydney, 22 April (Argus) — Australian battery metals refiner Queensland Pacific Metals (QPM) will focus on energy markets via its Moranbah gas project (MGP) and limit further expenditure on its Townsville Energy Chemicals Hub (Tech) project. The firm will switch its prioritisation to its wholly-owned QPM Energy (QPME) business, with QPME's chief executive David Wrench to be appointed as QPM chief executive, the company said on 22 April. MGP's coal mine waste gas output from nearby the coal mining hub of Moranbah in Queensland's Bowen basin will be increased to 35 TJ/d (935,000 m³/d) by late 2024, up from October-December 2023's 28 TJ/d, with QPME to accelerate production and reserves to provide required peaking power for the national electricity market (NEM) via Thai-controlled energy firm Ratch Australia's 242MW Townsville Power Station. QPME aims to drill a further seven wells by the year's end, increase workovers and increase production from third-party supply of waste mine gas from regional coal mines. The company is also seeking to develop a portfolio of plants to supply up to 300MW of gas-fired power to the NEM, while compressed natural gas and micro-LNG facilities will also be developed in Townsville and Moranbah, QPME said. A surge in government support for renewable power generation in order to meet Australia's 2030 emissions target by retiring coal-fired power means more gas-peaking plants will likely be needed in the coming years to support variable generators. But Australia's domestic gas supply is forecast to experience shortfalls this decade, with predictions of a 76 PJ/yr gap in 2028. The Tech project which aims to produce 16,000 t/yr of nickel and 1,750 t/yr of cobalt sulphates from imported laterite ore saw its funding significantly reduced in February because of what QPM described as a "challenging investment environment" resulting from depressed nickel prices. By Tom Major Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

India mulls using more natural gas in steel sector


19/04/24
News
19/04/24

India mulls using more natural gas in steel sector

Mumbai, 19 April (Argus) — India's steel ministry is considering increasing natural gas consumption in the sector as it aims to lower carbon emissions from the industry. Steelmakers held a meeting with the steel ministry earlier this month, to discuss challenges and avenues to increase gas allocation to the sector, according to a government document seen by Argus . Steel producers requested that the government set gas prices at an affordable range of $7-8/mn Btu for them, to make their gas-based plants viable, as well as for a custom duty waiver on LNG procured for captive power. India's LNG imports attract a custom duty of 2.5pc. City gas distribution firms sell gas at market-determined prices to steel companies. Representatives from the steel industry also requested for the inclusion of gas under the purview of the country's goods and service tax, and to be given higher priority in the allocation of deepwater gas, which has a higher calorific value. Deepwater gas is currently deployed mostly to city gas distribution networks. Steelmakers are currently undertaking feasibility tests for gas pipeline connectivity at various steel plants. But a gas supply transmission agreement requires a minimum five-year period for investment approval. The steel industry is heavily reliant on coal, and the sector accounts for about 8-10pc of carbon emissions in the country. A task force of gas suppliers including IOC, Gail, BPCL, Shell, and HPCL and steel producers like Tata Steel, AMNS, All India Steel Re-roller Association and the Pellet Manufacturers Association has been set up, and the team is expected to submit a report on increasing natural gas usage and lowering carbon emissions by 15 May, the government document said. This team is one of the 13 task forces approved by the steel ministry to define the country's green steel roadmap. The steel ministry aims to increase green steel exports from the country in the light of the policies under the EU's Carbon Border Adjustment Mechanism (CBAM), which will take effect on 1 January 2026. Under the CBAM, importers will need to declare the quantity of goods imported into the EU in the preceding year and their corresponding greenhouse gas emissions. The importers will then have to surrender the corresponding number of CBAM certificates. CBAM certificate prices will be calculated based on the weekly average auction price of EU Emissions Trading System allowances, expressed in €/t of CO2 emitted. This is of higher importance to Indian steelmakers as the EU was the top finished steel export destination for Indian steelmakers during the April 2022-March 2023 fiscal year with total exports of 2.34mn t, and has been the preferred choice for Indian steel exports in the current fiscal year owing to higher prices compared to other regions. Indian steelmakers have started to take steps to lower their carbon emissions by announcing collaborations with technology companies to decarbonise, and are trial injecting hydrogen in blast furnaces, and increasing the usage of natural gas in ironmaking. By Rituparna Ghosh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more