Rising zinc costs likely to squeeze HDG margins
Rising zinc and soaring energy costs will squeeze margins for hot-dip galvanised (HDG) coil manufacturers without a significant demand and price recovery.
European zinc smelters have responded to recent surges in energy costs with production curtailments. Global metals group Nyrstar announced that its Nordic zinc smelter, Budel, will be placed under care and maintenance from 1 September. The company has previously reduced production in response to high energy costs. Swiss-based commodity firm Glencore also placed its Portovesme zinc line in Italy under maintenance in late 2021 amid high energy costs, and the asset has remained off line since.
Prices on the London Metal Exchange jumped following the announcement of the recent curtailments, with the three-month contract closing at $3,797/t on 16 August, up from $2,857/t in the middle of July. Gas prices have also been jumping on constrained supply from Russia. The TTF benchmark was €240/MWh on 18 August, compared with €144.50/MWh at the start of July.
These costs will affect European and Turkish rollers, particularly given low HDG demand and prices. Of the approximate 23,000t of zinc imported by Turkey last year, just over 80pc of this came from European and EU producers. Turkey has imported nearly 10,000t of zinc from Europe so far this year.
The majority of zinc contracts are annual. As much as 80pc of EU steel mill demand is met through annual contracts, although some terms have shortened in recent years. Contracts typically have large volume optionality of plus or minus 10-20pc, and European mills have been taking as little as possible given the low demand from key sectors, such as automotive, and reduced output.
Zinc costs vary depending on mill and supplier. But Argus estimates that on average, if a mill paid about $75/t for a 100g zinc coating on 0.5mm rolled material, with zinc costing $2,857/t at the beginning of July, this would have risen to approximately $100/t based on current prices.
Thus, re-rollers and mills will be forced to try to implement price increases in the coming weeks amid low demand.
Lower HDG demand has continued for several months now amid economic uncertainty and a weak automotive sector. Buyers' reduced purchasing power will do little to revive demand, without which re-rollers will struggle find the market accepting of higher prices. It is more likely that they will find their margins squeezed, boosting the likelihood of further cuts.
Related news posts
Tata Steel UK unions vote to strike
Tata Steel UK unions vote to strike
London, 9 May (Argus) — Workers at Tata Steel's Port Talbot plant in south Wales have voted to strike in response to the company's plan to stop iron-making and cut thousands of jobs. Over 3,000 members of Community Union have been balloted, with more than 85pc in favour of industrial action — this is despite the company threatening to withdraw its proposed support package in the event of strikes. "It should be noted this resounding mandate has been delivered in spite of the company's bullying and unacceptable threats to slash redundancy payments," Alun Davies, Community's national officer for steel, said. He urged Tata to "get back around the table" to prevent a major industrial dispute. Workers at Unite the union have already voted in favour of strike action, which is set for 30 May. Unions — and the Syndex consultancy that has represented them in talks with Tata — have called the company's agreement with the government a "bad deal". They have requested more financial support to help Tata with decarbonisation, and for a blast furnace to be maintained. The government is giving Tata £166/t towards its decarbonisation — less than many European competitors receive from their governments. The low level of state support played into Tata's decision to move to one large electric-arc furnace, which has been roundly criticised by unions. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Turkey's new EAF capacities to trigger scrap shortage
Turkey's new EAF capacities to trigger scrap shortage
London, 9 May (Argus) — More companies will invest in electric-arc furnaces (EAFs) as part of their green transition, which will likely result in more demand for scrap amid tighter scrap supply in the medium term, market participants said at an industry conference in Istanbul today. The shift toward EAF production globally is set to boost scrap consumption, and could limit the availability of scrap for export markets. The majority of Turkish steel production is EAF based, with most new capacities coming on line also scrap-based. Potential legislative changes, such as those proposed in the UK to restrict scrap exports and protect local supplies, could further tighten the market supply. Such restrictions, coupled with rising scrap consumption, could intensify competition. Major steel producers in the EU and the UK are also transitioning to EAF production, significantly increasing their domestic scrap demand, resulting in suppliers focusing less on exports. Turkey has traditionally relied on imported scrap. Turkey should explore integrated production methods and consider hydrogen-based steel production systems, the general manager of Cag Celik Ercument Unal said. Adopting direct-reduced iron (DRI) technology would reduce the need for scrap, but will increase the demand for iron ore. Turkish steel producer Tosyali Holding anticipates globally hydrogen-based methods will account for 22pc of total steel production by 2050, following scrap-based methods, which are expected to contribute 40pc. There were no major changes in the steel production methodology in the past 50 years, except for some developments in automation and minor energy savings. However, current developments in hydrogen use will be more significant, Tosyali said. Tosyali recently completed its second DRI plant at its Algeria site and is currently building a third DRI, which will use 100pc hydrogen in production. "Every investment we make today regarding the green transition will be more economical than the trade measures we will face tomorrow," Tosyali chairman Fuat Tosyali said. Turkey has great potential for solar energy to produce hydrogen, director of Huawei Smart PV Turkey Eray Hazer said. One of the major Turkish mills bought 1GW of capacity, but this is only enough to cover 10-15pc of its production, so in order to generate enough electricity to run the DRI, higher solar power installation is required. There are a number of risks which can affect the Turkish steel industry, South Korean steelmaker Posco research and development deputy manager Dr Kisoo Kim said during the conference, including reduced exports due to the implementation of the EU's Carbon Border Adjustment Mechanism (CBAM), rising scrap demand causing supply shortages, and notably high output costs to produce green electricity. The latter could be eased by considering the nuclear power option as a bridge solution if public approval is achieved, he added. By Elif Eyuboglu Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Jakarta forum calls for exploring Ni price references
Jakarta forum calls for exploring Ni price references
Singapore, 9 May (Argus) — The global nickel market should explore different price references for nickel products to reduce price uncertainty, panellists said at the Third Nickel Producers, Processors and Buyers Conference in Jakarta, Indonesia. The London Metal Exchange (LME) nickel price, which is the global benchmark for class 1 nickel products, has been volatile for years now since LME suspended nickel trading in early March 2022, when prices surged above $100,000/t overnight. There were hopes late last year that prices would become more stable this year. But the price outlook has been uncertain since the turn of the year, with class 1 prices on the London Metal Exchange (LME) slumping to a four-year low of $15,877.50/t on 6 February on expectations of weak Chinese stainless steel and electric vehicle demand, before rebounding to a six-month high of $19,387.50/t on 26 April because of a delay in Indonesian RKAB mining right approvals and a reviewed forecast suggesting a significant smaller surplus for this year. There should be a new reference to counter price volatility, some conference participants said, while others suggested decoupling class 1 and 2 nickel prices. "[Prices are volatile now because] most prices are referenced to class 1, so maybe we can explore further with more price references, like class 2 nickel pig iron (NPI) and mixed hydroxide precipitate (MHP)," Ray Gunara, president-director of Indonesian coal producer Harum Energy, said on 7 May. Harum Energy this year bought a majority stake in an Indonesian nickel processing and refining business. Most conference participants agreed that a different price reference would help maintain nickel price stability. "[NPI prices now are] difficult to predict because the class 1 [prices] are no longer linked to the product we are selling," Indonesia miner Trimegah Bangun Persada (Harita Nickel)'s president-director Roy Arman Arfandy said. Indonesia is the world's largest nickel producer. The correlation between the monthly average of the LME class 1 cash official price and Argus ' NPI ex-works China index has fallen to close to 0.41 between January and May, from 0.91 in 2023. The correlation between the LME class 1 cash official price and Argus ' class 2 nickel benchmark Indonesian Nickel Index (INI) for 10-14pc NPI fob Indonesia was 0.52 between January and May. Market participants at the conference also expressed hope for more government support. "Currently there is an imbalance between local and foreign investments, so we are hoping that the government can give more support to local players like us," one producer said. Another conference participant said that they would aim to build a precursor cathode active material plant if given more support. Argus ' class 2 nickel INI for 10-14pc NPI fob Indonesia stood at $118.70/mtu on 3 May. The INI for 37pc MHP was at $142.80/mtu fob Indonesia and 70pc matte was at $148.90/mtu fob Indonesia on the same day. By Sheih Li Wong Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s scrap export tender extends gains for May
Japan’s scrap export tender extends gains for May
Shanghai, 9 May (Argus) — The monthly export tender of Japanese scrap dealer co-operative Kanto Tetsugen continued its upwards trend in May, propelled by a favourable currency exchange rate. The May tender was concluded at ¥52,590/t fas for 20,000t of H2 scrap on 9 May, an increase of ¥1,503/t from April. This brought the fob price to an equivalent of ¥53,590/t or $344.60/t. Two cargoes were settled on 9 May, one of 15,000t and another of 5,000t, both at the same price. Some market participants anticipated the first would go to Bangladesh, as in recent months, while some market discussions were suggesting both were destined for Vietnam. The Vietnamese domestic steel market has shown more signs of a recovery since mid-April. The renewed increase in the export tender was mainly driven by the depreciation of the yen. Despite the significant increase in the tender result, the equivalent price in US dollars only rose by around $1/t compared with the previous month. The yen weakened to ¥155.70 to the dollar from ¥151.80 on 10 April. The Argus H2 fob Japan assessment was ¥50,800/t on 8 May, while the April monthly average was ¥50,757/t fob Japan. Tokyo Steel following the Kanto tender raised the collection price at its Utsunomiya plant by ¥1,000/t and maintained prices at other plants. The increase in the tender result and domestic prices in the Kanto region will raise suppliers' target levels for export business. But overseas buyers may require more time to absorb the gain and await further rises in steel sales prices, a market participant said. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more