Nickel rallies on macro, EV demand
Nickel prices on the London Metal Exchange (LME) surged to $26,130/t yesterday, reaching levels not seen since June on the back of bullish sentiment driven by better-than-expected US inflation data, with the accelerating world EV market and rumours of possible supply disruption from Russian Class 1 producer Norilsk Nickel (Nornickel) providing ancillary support.
The day's bounce came after the release of the recent round of US inflation data, which showed an annual rise in the US consumer price index of 7.7pc in October, the smallest 12-month increase since January this year and well below analyst forecasts of 8pc. The cooler inflation data was seen by the nickel market as a possible stepping stone towards a slower pace of future interest rate hikes by the US Federal Reserve, which together with a subsequent weakening of the dollar sent prices soaring towards the end of the day.
Nickel prices have been riding the EV wave recently, with official prices rising by nearly 10pc over the last two weeks to settle at $24,537.50/t yesterday, owing to the consistently positive near- and medium-term demand signals from the auto and electric vehicle (EV) battery markets.
China's output and sales of new energy vehicles (NEVs) — including battery electric vehicles (BEVs), plug-in hybrids and fuel-cell vehicles — hit all-time highs in October at 762,000 units and 714,000 units, respectively, data released earlier this week showed. The country's NEV production more than doubled during January-October to 5.485mn units, with sales also doubling over the period to 5.28mn units.
According to forecasts by Argus Consulting, European EV sales are expected to rise to 4.5mn by 2025, nearly double 2021 levels. And a white paper published by trading services firm Marex further projects world battery demand to touch 490GW this year, then nearly triple to 1406GW by 2025.
Much optimism around nickel prices has been derived from recent automaker results. EV giant Tesla produced over 365,000 vehicles and delivered more than 343,000 during the third quarter, year-on-year upticks of 54pc and 41pc, respectively. The company this week said it had plans to reapply to expand its gigafactory in Berlin, Germany.
Chinese producer BYD's BEV output increased by 151.31pc on the year to 104,894 in October, with production of plug-in hybrid electric vehicles up by 196.18pc to 114,915 units.
"There is inflation and there is a chance of recession," a market participant said. "But they continue to believe in nickel."
The market has also assessed recent producer activity favourably in choosing to go long. Australian resources firm BHP said last week that it expects nickel demand to grow four-fold by 2050, and Brazilian nickel miner Vale is also engaged in the reorganisation of some of its base metals operations as it targets more nickel and copper production in coming years.
Thursday's nickel rally came alongside unconfirmed rumours that the government of Finland has barred Russian mining group Nornickel from using its railways to ship feed to its Harjavalta refinery, leading to possible upcoming disruption in high-grade nickel supply. Market participants, mostly unsure about whether Finland had gone ahead with such an action, indicated that this may have led to small-scale panic-buying of cathode products where supply is already tight.
On-warrant nickel inventories in LME warehouses have fallen by over 60pc over the past year, and the market is now highly sensitive to any further supply disruption.
Other market participants ultimately pointed to the dearth of liquidity that has plagued nickel trading for much of this year as the main driver of the recent LME price movement, stating that prices have risen because traders did not want to be caught short in a still-volatile market. And with the LME's decision on whether to ban Russian material in its warehouses looming, traders aim to hold onto positions for fear of wide-scale curbs being introduced.
Related news posts
US met coal suppliers expect belated supply tensions
US met coal suppliers expect belated supply tensions
London, 3 May (Argus) — US coking coal prices have so far brushed off any impact of the collapse of the Francis Scott Key bridge in Baltimore on 26 March and the subsequent disruption of vessel traffic via the Port of Baltimore. Suppliers such as Arch Resources and Blackhawk that utilise the Baltimore shipping route have sought effective alternative arrangements so far and buyers have been largely comfortable despite some delays in laycans. Other suppliers such as Northern Appalachia's largest producer, Consol Energy's Bailey mine , which is a key supplier to Atlantic end-users, have faced more challenges, market participants suggest. The decline in fob Australia coal prices from last year's highs amid improved supply availability has also weighed on prices. The Argus assessed premium low-volatile coking coal fob Australia price was at $242.80/t on 3 May, largely unchanged from $254/t on 26 March after reaching a low of $224/t on 8 April. The US east coast prices have followed a similar trajectory, with low-volatile fob US east coast at $215/t today down from $220/t on 26 March after falling to a low in April. Low European demand has been one of the reasons behind the tepid response to coking coal shipment delays from the US. But with expectations of at least some recovery in the second half of 2024 and still no firm date on when the Baltimore traffic will return to normal, some US suppliers suggest coking coal prices may face some upward pressure later this year. Luxembourg-based steelmaker ArcelorMittal has kept its apparent steel demand outlook in Europe unchanged for 2024, expecting a growth of 2-4pc on the year . European steel association Eurofer downgraded its apparent steel consumption outlook for 2024 again , to 3.2pc from a previous forecast of 5.6pc, owing to worsening geopolitical tensions, economic uncertainty, energy prices, inflation and higher interest rates. But this would still be an improvement from a 9pc fall in steel consumption in 2023. There is also optimism among US coal suppliers that Brazil may be a source of renewed demand in the coming months with domestic steel production expected to improve. The Brazilian government is due to increase taxes for some imported steel products after facing pressure from the domestic steel industry to apply tariffs on imports, in particular on Chinese steel. Taxes will be increased to 25pc on 11 steel products — mainly flat rolled — contingent on such import levels exceeding prescribed quotas, the trade ministry's committee on foreign commerce, Gecex/Camex, said. Brazil's crude steel output reached 31.9mn t in 2023, down by 6.5pc on the year, World Steel Association data show. In the US, the fall in seaborne met coal prices also points to potential consolidation in the sector and the possibility of supplies tightening down the road. Industry participants highlight that some of the small and mid-sized mining operations that have emerged in the past two years amid a strong price environment are struggling. Bens Creek Group, which operates the Bens Creek Mining project in West Virigina with around 30,000-35,000st (27,200-31,800t) per month of coking coal output, filed for Chapter 11 bankruptcy in April. The year-to-date average price of high-volatile A for 2024 stands at $242.62/t fob Hampton Roads and is estimated to be above production costs for some of these mines. In 2022, high-volatile A prices averaged $347.81/t fob Hampton Roads, driven by a combination of market concerns over the Russia-Ukraine conflict and supply disruptions in Australia. While Russian coking coal remains available and competitively priced in the market, in particular a key supply source for China, US sanctions will continue to put pressure on major coal importers such as India and South Korea to reduce their Russian imports. The US announced fresh sanctions against Russian coal producer Sibanthracite's group of companies earlier this week. By Siew Hua Seah Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US job growth nearly halved in April
US job growth nearly halved in April
Houston, 3 May (Argus) — The US added fewer jobs in April as the unemployment rate ticked up and average earnings growth fell, signs of gradually weakening labor market conditions. The US added 175,000 jobs in April, the Labor Department reported today, fewer than the 238,000 analysts anticipated. That compared with an upwardly revised 315,000 jobs in March and a downwardly revised 236,000 jobs in February. The unemployment rate ticked up to 3.9pc from 3.8pc. The unemployment rate has ranged from 3.7-3.9pc since August 2023, near the five-decade low of 3.4pc. The latest employment report comes after the Federal Reserve on Wednesday held its target lending rate unchanged for a sixth time and signaled it would be slower in cutting rates from two-decade highs as the labor market has remained "strong" and inflation, even while easing, is "still too high". US stocks opened more than 1pc higher today after the jobs report and the yield on the 10-year Treasury note fell to 4.47pc. Futures markets showed odds of a September rate cut rose by about 10 percentage points to about 70pc after the report. Average hourly earnings grew by 3.9pc over the 12 month period, down from 4.1pc in the period ended in March. Job gains in the 12 months through March averaged 242,000. Gains, including revisions, averaged 276,000 in the prior three-month period. Job gains occurred in health care, social services and transportation and warehousing. Health care added 56,000 jobs, in line with the gains over the prior 12 months. Transportation and warehousing added 22,000, also near the 12-month average. Retail trade added 20,000. Construction added 9,000 following 40,000 in March. Government added 8,000, slowing from an average of 55,000 in the prior 12 months. Manufacturing added 9,000 jobs after posting 4,000 jobs the prior month. Mining and logging lost 3,000 jobs. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
UK decoiler Atlantic Steel enters administration
UK decoiler Atlantic Steel enters administration
London, 3 May (Argus) — Birkenhead-based decoiler Atlantic Steel filed for administration yesterday, according to a filing seen by Argus . The company has been under pressure since its previous owners took a large chunk of cash out of the business as part of a management buyout in 2022. Credit insurers began to pull cover on the business towards the end of last year, and suppliers have been calling retention of title, which protects suppliers in the event of insolvency or bankruptcy, in recent days. Sources suggest the debt of the business at the time of administration is around £18mn. The previous owners are preferential creditors after the banks, as they were due another £5mn from the business, according to Companies House filings. Market sources suggest it is likely the business will be bought out of administration, with other service centres interested in the assets — the lease on the site expires in the next few years but is extendable, and Atlantic operates the largest decoiler in the UK, capable of decoiling over 2.5m wide. It is also situated on the dock at Birkenhead, which cuts inland transportation costs. The UK HRC market has been under pressure for a number of months, in line with the struggles seen in Europe. Argus ' weekly assessment was £605/t ddp West Midlands on 2 May, down from a recent peak of £700/t at the start of February. The assessment reached an all-time high of £1,200/t on 31 March 2022, and the management buyout took place later that year. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Italian flat steel trading at premium on low supply
Italian flat steel trading at premium on low supply
London, 3 May (Argus) — Italian coil prices are trading at an atypical premium to northwest EU prices, especially for downstream products such as cold-rolled coil (CRC) and hot-dipped galvanised (HDG) coil. Multiple factors are playing into the current trend, which several producers say is unlikely to be sustainable given higher costs for northwestern mills — most notably, the comparatively brighter economic picture in southern Europe compared with the north, and lower steel output in Italy. Germany manufacturing PMI data has been consistently below Italian levels since August 2022, and registered its last monthly growth nearly two years ago in June 2022. Italian manufacturing has expanded in five months over the same period, registering its last increase in March 2024. In recent years, German manufacturers have been buffeted by the loss of cheap Russian energy, a reduction in demand from key export markets, most notably China, as well as the lack of investment in infrastructure and political difficulties. And yet, German hot-rolled coil (HRC) output increased by 5pc year on year in the first quarter of this year, partially driven by mill restocking, while Italian output slumped by just over 9pc in the same period. Naturally, Acciaierie d'Italia halting furnaces and producing with just one asset of 1 mn t/yr capacity plays a role in the lower overall output, but it has also been running just one rolling line at low capacity. Novi Ligure has nearly stopped, and producing depending on if stocks of raw material match customer enquiry. Financially troubled re-roller Liberty Magona has also produced intermittently and at low levels as it has struggled to obtain letters of credit, and thus only produced when able to buy HRC by paying in advance, or financed by third-parties. Producer Arvedi has taken the decision to drastically reduce or even stop offering CRC over the past year, on its inability to compete with Asian import pricing. CRC is the only major flat steel product to have not been hit by dumping duties in recent years, and weak demand in Asia saw a shift of regional mills to the EU market. Ample quota availability for CRC also meant that safeguards were not a factor, unlike for HDG. Arvedi has continued supplying HDG, and is currently one of two constant Italian suppliers of the material. The only regular supplier of both downstream products has become re-roller Marcegaglia. Again, the mill has mostly been selling CRC for very prompt delivery enquiries, unable to compete with Japanese, Korean and Indian import CRC, which have become the reference. Despite the lower volumes of CRC the producer has been selling, it has tried to maintain the historical €10-20/t differential between CRC and HDG offers, with varying success over the past months. The uncertainty of the HRC import duty on "other countries" material has likely made the producer, which relies heavily on imported coils and is one of the largest spot buyers in the world, less clear on the discounts it can provide given the varied duty it has had to pay in recent quarters. Sales opportunities in central and east Europe over the past months have also aided its order books. Transportation costs, slim margins and regional competition, as well as weak fundamentals, have kept north EU mills more focused on closer-by markets. While some sellers have been present in Italy with both CRC and HDG, they have not been undercutting Italian producers. In addition, demand for HDG has been relatively stable, while stringent safeguard quotas have not allowed Italian prices to fall under pressure from imports. EU car registrations in the first quarter were up by 4.4pc year on year, and although both Germany and Italy posted growth, the German increase was below the average rate for the bloc, while Italy was up by 5.7pc. Clearly, EU producers have offloaded some volumes of both CRC and HDG in the export markets this year, with exports of the products rising dramatically in January-February. The majority of those volumes have come from northwest EU suppliers. Of late, rising import prices have also helped southern mills more, given the quicker impact imports have on domestic prices in the south. By Lora Stoyanova and Colin Richardson HDG CRC spreads $/t Germany and Italy manufacturing PMI Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more