Generic Hero BannerGeneric Hero Banner
Latest market news

MHP, nickel sulphate drive Indonesia Ni export growth

  • Market: Metals
  • 07/08/24

Indonesian nickel exports rose sharply on the year in the first half of 2024, because of increased production capacity for mixed hydroxide precipitate (MHP) and nickel sulphate, according to research undertaken by Australian bank Macquarie.

Indonesia's total nickel exports amounted to 805,000t during January-June, a year-on-year rise of 20.7pc. Total exports inclusive of stainless steel rose by 22pc on the year to 998,000t.

The country's four operating high-pressure acid leach plants exported a combined 139,000t of nickel metal in MHP and nickel sulphate during January-June, a year-on-year rise of 106pc. Second-quarter exports alone were at 81,000t, Macquarie said.

Nickel sulphate exports grew from 5,400t in the first half of 2023 to 85,400t this year, equivalent to 19,000t in nickel metal. Exports of nickel in MHP grew by 80pc on the year to 120,000t, Macquarie said.

Growth in exports of nickel pig iron (NPI), the biggest product by exported volumes, grew by 13pc on the year in January-June, to 544,000t. Weak NPI export growth relative to that of MHP and nickel sulphate is indicative of Indonesia's rising prominence in the battery materials sector.

Indonesia's high-grade matte exports declined year on year, as more supply was absorbed domestically in the production of nickel metal. Total high-grade matte exports declined by 17.8pc to 101,000t, according to Macquarie.

Nickel ore exports increased across the second quarter, according to Macquarie's data, indicating a continuing tightness in domestic supply even as the government accelerated its approval of mining quotas. Indonesia imported 900,000 wet metric tonnes (wmt) of nickel ore from the Philippines in June, up from 200,000wmt in March and zero in January-February.

NPI exports to China declined over the first half of the year, according to Macquarie. China's share of Indonesian NPI exports fell to 74pc in June, the lowest since the first quarter of 2022. Instead, more NPI is flowing from Indonesia to India and Europe because of the cost benefits it provides, Macquarie said.

Indonesian stainless steel melt production was up by 25pc year on year during January-June, a turnaround from 2022 and 2023 when production contracted by 4pc and 9pc, respectively, Macquarie's data show.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
16/07/25

UK HDG buyers duplicate import orders amid quota issues

UK HDG buyers duplicate import orders amid quota issues

London, 16 July (Argus) — UK hot-dip galvanised importers are increasing imported order volumes in some instances because of the government's imposition of a 15pc cap on the other countries' quota. The UK business secretary, Jonathan Reynolds, imposed the cap on 24 June, days before the quota reset on 1 July, stranding supply from South Korea and Vietnam . HMRC has now suspended clearances into the quotas for Vietnam and South Korea — the main users of the other countries' quota — until 1 August, meaning steel cannot be accessed even where buyers are willing to pay a duty. This is contributing to storage issues at major ports, particularly Liverpool. One service centre said major construction companies are worried about delays to some projects because of availability issues on particular gauges and coatings. Because of the potential disruption, some buyers have booked material elsewhere, in particular from Turkish rerollers, to avoid supply issues. The government's action, designed to protect the domestic producer Tata Steel, has "increased the amount of imports, as we are having to go elsewhere aside from South Korea and Vietnam", one service centre said. Tata does not produce all the necessary sizes and specifications for domestic buyers, sources suggest. There is typically abundant EU quota for HDG, but European mills, like Tata, struggle to compete with Asian sellers because of their higher energy costs. Simone Jordan, the director of the International Steel Trade Association (ISTA), called on the secretary of state to "address this catastrophic situation and reconsider his determination". Import volumes not rising There has been no real increase in third-country hot-dip galvanised coil imports into the UK since the US imposition of Section 232 in 2018. The country imported 468,500t of HDG last year, compared with just over 485,000t in 2018; there was a large jump in 2021, to over 732,000t, as buyers scrambled to source material following the Covid-19 pandemic, when demand increased much more sharply than European supply. The most notable change in imports is the increased share of South Korea, which has risen from around 15pc of non-EU imports in 2018 to over 43pc today. Much of that growth started last year, when a leading producer in the country started to divert automotive material into the general industrial market in the UK. Vietnamese volumes have also ratcheted up in recent years, partly because it was exempt from the safeguard on HDG for a period, before it came into scope. Vietnam is the largest importer of Chinese hot-rolled coil, whose low-priced exports have reshaped global trade flows in the last year. Turkey, which is now exempt from the UK safeguard on HDG, is also a large buyer of Chinese HRC; indeed, the country's rerollers can avoid dumping duties on Chinese material, provided it is re-exported. Vietnam and South Korea shipped over 281,000t of HDG to the UK last year, accounting for over 60pc of third country volumes, and account for almost three-quarters of third country imports over January-May this year. India has been the cheapest supplier of HDG into the UK on average this year, according to customs data. The average landed Indian price has been £587/t cfr, followed by Taiwan at £607/t and Vietnam at £618/t. Vietnam is the cheapest import source on average, at £472/t, closely followed by India at £475/t. Tata Steel is the largest buyer of Indian coil in the UK at present. By Colin Richardson UK HDG imports Tonnes Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Rio Tinto’s copper output rises 15pc on year in Apr-Jun


16/07/25
News
16/07/25

Rio Tinto’s copper output rises 15pc on year in Apr-Jun

Sydney, 16 July (Argus) — Anglo-Australian mining company Rio Tinto produced 229,000t of copper — including copper in concentrate and refined metal — in April-June 2025, up 15pc on the year, driven by record high output from its Oyu Tolgoi underground mine in Mongolia. The company maintained its 2025 copper production guidance range at 780,000-850,000t, but now expects output to sit in the upper end of the band, it said in a quarterly report on 16 July. Rio Tinto's Oyu Tolgol mine hit a record high production of 87,000t of copper in concentrate at in April-June, up 65pc on the year (see table). The company plans to ramp up production at the mine over the next few years and reach an average of 500,000 t/yr of copper by 2028-2036. Rio Tinto's copper concentrate production at its Escondida mine in Chile, which is operated by Australian producer BHP, reached 87,000t on an equity basis in April-June, up 4pc on the year because of increased mining. The increase came despite a drop in ore grades at the open-pit copper mine to 0.95pc Cu from 0.99pc Cu a year ago. Rio Tinto's copper refining operations slowed at the Escondida mine and the Kennecott mine in the US. Geotechnical challenges at the integrated copper mining operation in Kennetcott, located just outside Salt Lake City in Utah, decreased the volume of concentrates available for refining. This pushed down the site's refining output by 16pc on the year. Rio Tinto is expanding the Kennetcott mine capacity by 250,000 t/yr by building an underground infrastructure. The expansion is expected to be completed by end of 2025. By Avinash Govind Rio Tinto's Apr-Jun copper output 000' t April-June '25 April-June '24 y-o-y Change (%) April-June '25 April-June '24 y-o-y Change (%) Kennecott (refined copper, 100pc basis) 40 48 -16 82 95 -14 Escondida (copper concentrate, equity basis) 87 84 4 176 155 13 Escondida (refined copper, equity basis) 15 15 -4 28 30 -6 Oyu Tolgoi (copper concentrate, 100pc basis) 87 53 65 152 99 54 Total 229 199 15 438 379 16 Rio Tinto Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Brazil fills coated steel quotas quickly


15/07/25
News
15/07/25

Brazil fills coated steel quotas quickly

Sao Paulo, 15 July (Argus) — Importers filled 60pc of Brazil's coated steel import quotas in the first 15 days following the imposition of duties in late June, according to foreign trade secretariat data. Brazil's quota system includes 17 steel products under a 25pc tariff regime, three of which are flat coated steel. The quotas came into effect on 24 June and will remain valid through October, when volumes will reset and new import licenses will be issued. Nearly 300,000 metric tonnes (t) of coated steel can enter Brazil at a 9-10pc duty rate, but volumes above that are subject to the higher 25pc tariffs. Galvalume (GL), a zinc-aluminum coated product, accounts for 147,038t of the quota. This item had 64pc of its four-month allocation already used by 9 July, while hot-dipped galvanized (HDG) reached 56pc of its 144,286t limit. The fast quota consumption rate points to robust demand, with buyers moving quickly to front-load shipments before the limits are reached. Demand for hot-rolled coils 3mm or thinner was also strong, with buyers filling 65pc of the 9,520t product's quota in two weeks. The quota system allocates 80pc of the total volume to the largest importers, a rule that applies to all 17 steel products subject to the 25pc tariffs. The other 20pc of the limit is reserved for smaller market participants. Smaller importers consumed 100pc of their share for at least two steel products. This means smaller players must pay a 25pc tariff on further shipments of those products until the quota resets in October. The Brazilian government has extended the tariffs through May 2026, when it will evaluate the future of the policy. The safeguard measure was first imposed in June 2024, but had limited effect in curbing rising import volumes. Imports reached a record 5.9mn t in 2024 , according to industry group Instituto Aco. Beyond the quota system, the government is also conducting anti-dumping investigations into imports of hot-rolled, cold-rolled and coated steel. The probes are expected to take at least six more months to conclude. No provisional duties have been imposed yet . By Isabel Filgueiras Brazil steel import quotas t Product Quota volume June-October 25 Consumed by 9 Jul % of consumption Hot-rolled HRC, ≥600mm wide, 4.75–10mm thick 1,285 285 22.2 HRC, ≥600mm wide, 3-4.75mm thick 3,111 1,245 40.0 HRC, ≥600mm wide, ≤3mm thick, ≥275 MPa 9,520 6,232 65.5 HRC, ≥600mm wide, ≤3mm thick 23,490 1,972 8.4 HRC, ≥600mm wide 29,394 578 2.0 Flat-rolled, ≥600mm wide 468 51 10.9 Cold rolled CRC, ≥600mm wide, 1-3mm thick 47,950 12,302 25.7 CRC, ≥600mm wide, 0.5-1mm thick 108,765 14,114 13.0 CRC, ≥600mm wide 9,273 4,763 51.4 Galvanized HDG, ≥600mm wide, <4.75mm 144,286 81,394 56.4 GL, ≥600mm wide 147,038 94,821 64.5 HDG, ≥600mm wide 1,915 764 39.9 Wire rod Wire rod, circular section <14mm dia 32,535 13,572 41.7 Tubes Seamless tubes ( oil, gas industry) 6,295 1,627 25.8 Submerged arc welding steel pipes, >406.4mm OD 490 24 4.9 Welded circular steel pipes, >406.4mm OD 420 43 10.2 Welded circular (oil, gas industry) 1,679 295 17.6 -Brazil's foreign trade secretariat Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Import tariffs cost US steel mills $39mn in May


15/07/25
News
15/07/25

Import tariffs cost US steel mills $39mn in May

Pittsburgh, 15 July (Argus) — Blanket US import tariffs set US steelmakers back nearly $39mn in May for seaborne steel feedstocks and ferrous scrap shipments, an Argus analysis of import data found. The White House imposed 10pc import tariffs on most countries in early April, which raised the cost of imported ferrous scrap, pig iron, and direct reduced iron (DRI) integral to US flat-rolled electric arc furnace (EAF) steelmakers. US steelmakers in May imported 1.07mn metric tonnes (t) of steel feedstocks and ferrous scrap at a declared value of $386mn, according to US customs data and Argus analysis of manifest data. As a result, the 10pc tariff cost US steelmakers at least $38.6mn in May for imports of pig iron, DRI produced by Nucor at its Trinidad plant, iron pellet feedstock used at Nucor's Louisiana DRI plant and bulk ferrous scrap from Europe. Argus excluded steel feedstocks and ferrous scrap imports from Canada and Mexico because they are exempt from the tariffs under the US-Mexico-Canada trade agreement. Excluding shipments from Mexico and Canada, US steelmakers imported 592,000t of pig iron in May at a value of $268mn, as well as 38,500t of ferrous scrap at a value of $16mn, and 126,000t of direct reduced iron (DRI) at a value of $52mn, according to US customs data. Nucor imported four bulk vessels of iron ore pellets in May from Brazil to its Louisiana DRI facility, which totaled 314,000t, according to Kpler vessel tracking data. The declared value of iron ore and concentrates imported from Brazil for the month was $161/t, US customs data shows. Argus estimated that the total value of these bulk vessels was $50.6mn. Electric arc furnace (EAF) steelmaker Nucor largely brushed aside bottom-line impacts from US import tariffs on iron metallics and scrap in its April quarterly earnings call because of its diversified raw materials sourcing strategy and other US trade policies supporting the steel industry. The import tax encouraged Indiana-based EAF steelmaker Steel Dynamics to lean more heavily on prime and shredded scrap in its flat-rolled melt mix, the company said in April on its quarterly earnings call. US president Donald Trump dealt EAF steelmakers a few major blows this week after he threatened to place a 50pc tariff on Brazilian pig iron imports and iron ore products and a 30pc tariff on European ferrous scrap on 1 August. The combination of these new tariffs would further amplify costs for US steelmakers and could prompt them to rejig their international and domestic supply chains. This could shock the domestic ferrous scrap market in the coming months and cause large shifts in global trade flows. By Brad MacAulay Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Trump threatens 35pc tariff on Canada by 1 August


15/07/25
News
15/07/25

Trump threatens 35pc tariff on Canada by 1 August

Houston, 15 July (Argus) — The US will impose a 35pc tariff on all imports from Canada effective on 1 August, President Donald Trump said in a 10 July letter to Canadian prime minister Mark Carney. The letter, which Trump posted on social media, noted that Canada previously planned retaliatory tariffs in response to the US' first tariff threats in the spring. He repeated his earliest justification for the tariffs — the illegal smuggling of fentanyl into the US from Canada — and said he would consider "an adjustment" to the tariffs if Canada worked with him to stop that flow. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more