Generic Hero BannerGeneric Hero Banner
Latest market news

Unilateral action can tackle plastic waste: OECD

  • Market: Petrochemicals
  • 02/10/24

Only stringent global measures addressing production and waste management combined can come close to eliminating plastic leakage into the environment by 2040, a new OECD report says.

The report — Policy Scenarios for Eliminating Plastic Pollution by 2040 — projects the impact of different policy measures, ranging from business as usual, through measures only aimed at boosting collection and recycling or only enacted in developed countries, up to global measures targeting both upstream production and downstream waste management.

It concludes that global plastic production will grow by 69pc by 2040 — versus a 2020 baseline — if the current policy environment is maintained, whereas the recycling rate would only increase by around 5pc, resulting in a 50pc increase in the leakage of plastic into the environment. Combining measures aimed at curbing plastic demand — including production caps, development of re-use systems and increased design-for-recycling — with policies aimed at boosting collection and recycling of plastic waste could reduce virgin plastic production, boost recycling rates above 40pc and reduce leakage to near zero.

In a scenario where OECD members enact measures across the supply chain while non-OECD nations focus on downstream measures, virgin plastic production would rise only slightly by 2040, from 2020, the report says. But it projects that there would still be more than 10mn t/yr of plastic waste leaking into the environment, compared with 20mn t in 2020.

Furthermore, the report concludes that enacting measures across the supply chain will be the most cost-effective way of limiting the environmental impact of plastic waste. This is because upstream measures such as design-for-recycling will reduce the cost of improving collection and recycling, which will be higher in many non-OECD countries where existing waste management infrastructure is more limited.

Global measures across the supply chain would cost 0.37pc of gross domestic product (GDP) in OECD countries and 0.62pc of GDP in non-OECD economies by 2040, the report projects, compared with over 0.5pc and nearly 1pc, respectively, if only downstream measures were implemented. "These costs exclude the avoided costs of inaction and should be considered in the context of vastly improved environmental outcomes", the report notes.

Shaping the debate

The release of the report comes ahead of the fifth and final scheduled round of UN negotiations to develop a binding global treaty to tackle plastic waste, which will begin in South Korea in November.

In past sessions, there has been ongoing debate about the scope that the treaty should take. Some delegates, especially from countries with a reliance on plastic-producing industries, have so far favoured a focus on downstream measures and opposed caps on virgin plastic production. A recent change of tack from the US in support of production caps surprised many observers, but its impact on discussions will depend on how much leverage it is willing to use to convince others to follow suit.

Discussions during the Intergovernmental Negotiating Committee on Plastic Pollution on 25 September in New York showed member countries are still far apart in terms of policy agreements, with frustration sometimes visible from a few diplomats about the lack of progress in certain areas. Negotiations up to this point indicate that achieving the OECD's ideal scenario for tackling plastic waste will be extremely challenging.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
23/06/25

Indian quality controls for PVC set for December 2025

Indian quality controls for PVC set for December 2025

Singapore, 23 June (Argus) — The implementation of Bureau of Indian Standards (BIS) quality controls for polyvinyl chloride (PVC) imports into India is now set for to 24 December 2025, extended from 24 June 2025. The extension was announced late on 20 June in the Gazette of India , signalling a third extension in the implementation of BIS quality controls on PVC imports. An initial implementation date of 26 August 2024 was set by India's Department of Chemicals and Petrochemicals (DCP), followed by an extension to 24 December 2024 and a second extension to 24 June 2025 . Some progress is noticeable, but is it enough? There are 30 PVC homopolymer production units outside of India that are currently listed as BIS certified as of 23 June. This includes key production units in Japan, South Korea, Taiwan, Thailand, Indonesia, Vietnam and Malaysia, which accounted for around 44pc of total imports into India in 2024, according to latest data from Global Trade Tracker (GTT). Some units in the US, Germany, France, Egypt, Colombia and Mexico are also included in the list, but other US and European production units are either still waiting for BIS audits to be conducted at their plants or are waiting to hear back from BIS agents after submitting their applications for audit. This is a significant improvement since the previous implementation date of 24 December 2024, when a total of 14 PVC homopolymer production units were BIS certified, predominantly in Japan, Taiwan and South Korea. Chinese PVC producers, which accounted for around 40pc of total imports into India in 2024, have also yet to receive BIS certification to supply PVC into India. India needs to import a significant share of its PVC supply before the start of new domestic capacities from 2026 onwards and an extension to the implementation of BIS quality controls is likely because some key exporters are still waiting to receive BIS certification, market participants said. Suspension PVC (s-PVC) import prices into India were assessed at $680-720/t cfr India on 20 June 2025, while paste PVC (e-PVC) import prices were assessed at $940-1,020/t cfr India. By Michael Vitiello India's PVC imports '000t Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Versalis completes pyrolysis production tests at Mantua


19/06/25
News
19/06/25

Versalis completes pyrolysis production tests at Mantua

London, 19 June (Argus) — Italian chemical company Versalis has completed initial production tests at its 6,000 t/yr input capacity chemical recycling site in Mantua. The company reaffirmed plans to expand the technology at a site in Priolo, Sicily which will have an input capacity of 40,000 t/yr. The company, a subsidiary of integrated oil company Eni, is producing new plastic materials via a "high thermal performance pyrolysis reactor" as part of its "Hoop" brand. The new plastic materials will be suitable for food packaging and pharmaceuticals. The Mantua plant began construction in October 2023. The new site in Priolo was planned as part of the Eni-Versalis "chemical transformation plan" that was signed in March 2024 with the enterprise ministry, although an input capacity was not given at the time. Eni announced plans to phase out Italian steam crackers in October 2024 , choosing to focus "on a high-value downstream portfolio comprising compounding and specialised polymers, biochemistry and products from the circular economy". By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Pryme restarts Rotterdam PPO plant


19/06/25
News
19/06/25

Pryme restarts Rotterdam PPO plant

London, 19 June (Argus) — Dutch plastic-derived pyrolysis oil (PPO) producer Pryme has restarted output at its Rotterdam site, and by this morning had produced 25t of PPO since 18:00 local time on 18 June. The output marks a successful restart since the operation, Pryme One, shut down on 29 April because of a leaky discharge valve. The Pryme One site has an input capacity of 26,000 t/yr. Pryme reduced its second quarter production guidance to "up to 250t" from "750-1,250t" following the shutdown. Pryme previously limited operations at the site in March, after vibrations caused a shutdown. In its 2024 annual report the company said that it had originally aimed for production goals of a little below 7,000t of PPO for 2025. Since the leak on 29 April the firm guided production of 1,500-2,000t for the third quarter and 3,000-4,000t for the fourth quarter in its first-quarter results, published on 6 May, adding that "production is expected toward the lower end of each range unless further improvements are realised". By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

UK firm wins grant to develop bio-based UPR


18/06/25
News
18/06/25

UK firm wins grant to develop bio-based UPR

London, 18 June (Argus) — UK-based chemical distributor Bowden Chemicals has been awarded a government grant to develop unsaturated polyester resins (UPR) made from bio-based materials. The company, which supplies raw materials for the polyester resin and phenolic resin industries, aims to develop a UPR over the next 18 months that matches the performance of fossil-based resins while containing more than 50pc renewable content. UPRs are hard, thermosetting resins used in the construction sector. The grant was awarded through the UK government's "Smart Grant" scheme, administered by innovation agency Innovate UK. The amount of funding has not been disclosed. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Keyera acquiring Plains' Canada NGL assets for $3.75bn


17/06/25
News
17/06/25

Keyera acquiring Plains' Canada NGL assets for $3.75bn

Houston, 17 June (Argus) — Midstream operator Keyera will acquire Plains All American's Canadian natural gas liquids (NGLs) business for C$5.15bn ($3.75bn). The transaction, which is expected to close by the first quarter of 2026, includes 193,000 b/d of fractionation capacity in western Canada, more than 1,500 miles of pipelines gathering 575,000 b/d of NGLs, 23mn bl in NGL storage capacity, and the 5.7 Bcf/d Empress straddle gas processing plant. The acquisition is expected to deliver C$100mn of annual synergies between the assets in the first year, according to Keyera. Plains said the divestiture will allow the US-based midstream operator to focus on its crude handling assets in both the US and Canada. Plains will keep nearly all of its NGL assets in the US. The acquisition of Plains' assets gives Keyera NGL fractionators and gas processing plants in Fort Saskatchewan, and at the Empress facility in western Canada as well as storage at Sarnia, Ontario. It also links Keyera's existing assets to takeaway agreements for LPG exports out of British Columbia. Keyera chief executive Dean Setoguchi said the acquisition "... brings key infrastructure under Canadian ownership, keeping value and decision-making closer to home." Plain's Canadian business is underpinned by fee-based contracts with an average remaining life of 10 years, Keyera said. Associated NGL production in Canada is expected to grow by 500,000 b/d by 2040, according to Keyera, as natural gas production in western Canada climbs by 6 Bcf/d during the same timeframe. By Amy Strahan Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more