Generic Hero BannerGeneric Hero Banner
Latest market news

Viewpoint: US BD demand awaits 1Q rebound as risks loom

  • Market: Petrochemicals
  • 24/12/24

US demand for butadiene (BD) is expected to increase in January, but buyer sentiment for the remainder of the first quarter remains uncertain.

Inventory restocking in January is expected to draw down excess supply and provide near-term price support, according to market participants. Derivative manufacturers aim to rebuild inventories following earlier-than-normal destocking initiatives this year. Many buyers employ standard inventory control management strategies to avoid paying higher end-of-year inventory taxes, particularly in Texas. Others cut costs to improve year-end financial statements.

Domestic demand in February and March is less clear, as market participants question whether the market will rebound from persistently low demand at the end of 2024.

US BD prices on a contract basis fell by 12pc duringthe fourth quarter, owing to weak demand and oversupply. Demand was depressed by BD consumer turnarounds in October, seasonal slowdowns between November-December and trade pressures tied to derivative imports.

US tire shipments this year are expected to rise by 2.1pc to 338.9mn units, surpassing the record set in 2021, according to the US Tire Manufacturers Association. However, market participants along with US trade data reference a jump in tire imports from Asia-Pacific. Both Bridgestone and Goodyear have said low-cost tire imports and structural changes in segment profitability across the Americas are eroding their market share, fueling capacity rationalization, asset sell-offs and plant closures in the region.

Acrylonitrile butadiene styrene (ABS) is another segment at risk of stronger competition from low-cost, Asia-origin imports. Ineos Styrolution plans to permanently shut down its ABS plant in Addyston, Ohio, in 2025 because the facility cannot compete with imported material.

"Over the past few years, we have seen the ABS market become increasingly competitive, particularly with growing competition from overseas imports," Ineos Styrolution chief executive Steve Harrington said in late October.

Protectionist trade policies are likely to be a feature of president-elect Donald Trump's second administration, potentially altering business investment decisions and durable goods trade flows.

Even if demand does not improve, planned maintenancein the first half of 2025 is expected to tighten BD supplies. A heavy turnaround cycle for steam crackers will concentrate in the first and second quarters, constraining availability of feedstock crude C4.

One integrated US Gulf coast producer plans to enforce BD allocations while its assets are offline for planned maintenance.

A separate, non-integrated producer has not announced BD sales controls, based on feedback from its customers. This same BD supplier was short on feedstock supplies for parts of this year, with the crude C4 merchant market illiquid in North America. A third producer has scheduled a cracker turnaround starting in January, but no indications emerged that would limit term volumes from its BD unit.

Reduced BD supply during cracker maintenance is likely to pull volumes away from the export market until the second half of 2025.

Export spot cargoes in the fourth quarter more than doubled from the third quarter, serving as a critical outlet to clear the domestic market of surplus BD supplies, even as lower export prices pressured US margins.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
20/05/25

New law to limit SM shipping into Canada

New law to limit SM shipping into Canada

Houston, 20 May (Argus) — A new shipping standard for hazardous material in Canada could limit styrene monomer (SM) shipments into the country. Transport Canada's new standard, called Containers for Transport of Dangerous Goods by Rail, went into effect on 1 May. The standard restricts SM transportation to class 117 tank cars, phasing out the previously used class 111 tank cars. Class 117 tank cars have a thicker shell and steel jacket outside the car, which provides thermal protection under the jacket to protect the tank car in the event of a fire. BNSF Railway on 24 April began rejecting any billing for tank cars that are subject to the phase-out in order to keep chemical shipments in compliance, the company said. The number of US SM sellers or distributors with class 117 tank cars is limited, meaning the standard could limit SM shipments into Canada, sources said. That could prove problematic if Shell, an SM producer in Canada, is offline long enough. Last week, [Shell declared a force majeure on SM] (https://direct.argusmedia.com/newsandanalysis/article/2689610) from its unit in Scotford, Alberta, but said they expect the plant to be back online as soon as 23 May. Only one other producer in the US, Ineos Styrolution, is known to have access to class 117 tank cars. This producer has a supply of them from their facility in Sarnia, Ontario, although that facility has been offline since April 2023 and the company plans on permanently closing it by October 2026 . The US also restricts shipping of some hazardous materials to class 117 tank cars, but the US regulation does not yet include SM. The US will restrict SM to class 117 tank cars starting 1 May 2029. By Jake Caldwell Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Phillips 66 vote could change company's course


19/05/25
News
19/05/25

Phillips 66 vote could change company's course

Houston, 19 May (Argus) — Just four of Phillips 66's 14 board members are up for election at its annual meeting this week, but the outcome could shape the future direction of the US refiner and midstream operator. Activist hedge fund Elliott Investment Management has named four of its own candidates for the vote which will come to a conclusion on 21 May, part of its multi-year effort to push the company to sell assets and focus on core businesses. Elliott, which has amassed a $2.5bn stake in Phillips 66, contends that the company has consistently trailed its industry peers and needs to streamline operations, including spinning off or selling its midstream business, selling its stake in Chevron Phillips Chemical (CPChem), and possibly other assets. Phillips 66 has told shareholders that Elliot is pushing "an aggressive short-term agenda" that would cause disruption, slow momentum and jeopardize shareholders' investments. It says the Phillips 66 board and management team are implementing a "transformative strategy" that has delivered results, expanded its NGL business, improved its refining cost structure and continues to position CPChem as the lowest cost producer of ethylene. "We don't act out of fear or short-term trends," Phillips 66 chief executive office Mark Lashier said in a first quarter earnings call last month. "We act on what we believe will create the most long-term value for our shareholders each and every time." Turning up the heat Elliott alleges that Phillips 66 suffers from "continuous poor corporate governance" and "disingenuous shareholder engagement." Elliott said its proposals could push Phillips 66 stock to more than $200 per share. The stock was trading near $124 per share Monday morning. Elliott's campaign has grown more aggressive in the months leading up to this week's shareholder meeting. It includes launching a website dubbed "Streamline 66" with slide shows, podcasts, biographies of its dissident board nominees, press releases and information on how shareholders can vote by mail, phone or online. Elliott nominees include Brian Coffman, former chief executive at Motiva; Sigmund Cornelius, former chief financial officer of ConocoPhillips; Michael Heim, former chief operating officer of Targa Resources; and Stacy Nieuwoudt, former energy analyst at Citadel. Three top shareholder advisory firms are backing the Elliott nominees in the proxy fight. Institutional Shareholder Services (ISS) and Egan-Jones are recommending all four of Elliot's dissident nominees, while Glass Lewis is backing three of the four — and supporting Phillips 66 nominee Nigel Hearne, a 35-year veteran of Chevron, because his experience "is more critical at this juncture". Phillips 66 pushback Phillips 66 has made some adjustments since Elliot started to agitate for change. In February 2024 it appointed former Motiva and Cenovus downstream executive Robert Pease to the board to address Elliott's concerns about a shift in focus from refining to midstream. And this year it agreed to sell off some of its European retail business , and expects about $1.6bn in pre-tax cash proceeds from the sale that it will use toward debt reduction and shareholder returns. But for the other Elliott recommendations to divest from midstream and sell its 50pc share of CPChem, Phillips 66 said the board has evaluated them and "came to the conclusion that neither action is in the best interest of long-term shareholders at this time". In additon to Hearne, Phillips 66's slate for the open board seats includes putting up Pease and current director John Lowe for re-election and nominating Howard Ungerleider, a former Dow president and chief financial officer. Current board members Gary Adams and Denise Ramos will not stand for re-election. Analysts with US bank TD Cowen said they "suspect Elliott could get some or all of its board members elected" and there could be larger board turnover next year if shareholders approve an Elliott proposal to require each director to submit a resignation to the board every year. The most likely outcome of an Elliott win is that the board "more deeply examines a midstream restructuring", TD Cowen said. By Eunice Bridges Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

PETCORE Europe Thermoforms: Collection is key


16/05/25
News
16/05/25

PETCORE Europe Thermoforms: Collection is key

London, 16 May (Argus) — Ahead of the Petcore Europe Thermoforms Conference in Dijon, France on 27-28 May, the technical manager of Petcore Europe's thermoforming working group, Jose-Antonio Alarcon, spoke to Argus about progress in the European tray-to-tray recycling market. Since we attended the annual event last year in Granada, Spain what has changed for the market? We don't see big changes. Collection is mostly the same, but there have been some developments on recycling projects. The appetite for recycling of tray-to-tray is growing. We have seen more players coming to operate in the tray-to-tray market over the last year, and more capacity is expected to start during this year. Petcore are aiming to make an study of the state of play for the thermoform industry in Europe to have a clear view on the real market size and the final application usage. The distribution between the food contact and non-food contacts, and also between mono and multi-layer, are essential for us and will be discussed in France. Following on from the success of last year's conference, what topics and discussions are you hoping will come up at this year's event? We want to keep energising the market, and building on the momentum. We have five pillars in the thermoforming working group that will be represented at the conference supporting the initiatives in the market. The first one is collection and sorting. If the material is not collected, it is not sorted, it is not recycled, period. We will be visiting a state-of-the-art sorting centre where they separate bottles and trays into mono- and multi-layer streams. The main challenge is how can these best practices be expanded to the rest of Europe. The second is recycling technologies. This is important, because you cannot use the same technologies for recycling bottle and trays because the physical properties of trays are not the same as bottles. Trays are often thinner and more brittle, they generate more dust and need to be treated more gently. Third is food contact, because we need to get the food contact trays back and into the closed loop. The majority of tray packaging placed on the market is in food contact applications, but there is not currently much progress on separate tray collection. There is work to be done in that direction. Then we have design for recycling and standardisation. If you don't design properly for recycling, then it will be very difficult for the market to scale up. And lastly is communication. Consumers need to know that trays can be recycled just like bottles, and we need people engaged. We also have presentations from the European Commission and legislative specialists as this is an important factor in the outlook for the market. Last year there was no specific legislation dedicated to thermoforms. Now we have the Packaging and Packaging Waste Regulation (PPWR) that passed into legislation and has mandated recycle content targets. So is this a positive? There are some positives and negatives. Yes, in the PPWR there is mandated recycled content targets for contact sensitive and non-contact sensitive packaging that will directly impact the tray market. Of course, this should move more people toward the use of tray flake and towards separate collection for tray. One of the impacts of legislation is that a lot of countries are moving to deposit return scheme (DRS) collection on bottles, which is deducting a lot of bottle from the regular yellow bin collection. So there will be a higher proportion of tray coming from this collection which could be a good opportunity for the circularity of trays if this waste is managed properly. And the recycled content targets should give a demand boost to the tray-to-tray market. We also have recycled content targets into bottles from the Single Use Plastics Directive (SUPD) meaning more and more bottle flakes are going back to bottles so that's a good opportunity for tray flakes. PPWR targets 30pc recycled content for contact sensitive packaging and 35pc for non-contact sensitive packaging by 2030. Will Europe be able to reach these targets in the tray market? It could, and it is possible, but it is ambitious. At this time, we are a long way from that point on tray-to-tray and it is very complicated. If we look to the bottle market, these percentages are achievable. Around 70pc of bottles are collected on average in Europe, but less than 30pc of trays. If we achieve similar collection volumes for trays then around 30pc recycled content should be feasible. But it will be challenging. At the moment bottle flake prices are at a significant premium to the virgin PET, which is impacting demand particularly in thermoforming applications and other cost saving markets like strapping and fibre. What impact could this have for PET tray flakes? People try to minimise their impact on the balance sheet, bottom line so less competitive prices versus virgin for rPET bottle flakes and pellets could spur more interest in tray. And maybe with the additional demand for bottle flake or food grade pellets from legislation and recycled content targets, people are looking for an alternative source so that they're not having to compete with that bottle flake market. But for PETCORE the focus is not on cost, our intention is that every package place on the market is collected, sorted and recycled. Over the last 12 months, we've seen quite a few chemical recycling projects being delayed or deferred. Is the difficult business environment across the whole industry an additional challenge for scaling up tray-to-tray? Of course there are challenges. We need to look at how the bottle recycling market has changed in the past 15 years with collection, technology, volume, quality, capacity etc., and the tray market is much later in the in the evolution, so it will take some time in order to achieve a similar situation as the bottle market. Of course, we expect that the speed of acceleration to reach the point of maturity to be faster for trays because we can take some learnings from previous experiences. Five years ago, trays were considered a contaminant at bottle sorting plants, and what we see today is that trays have the possibility to be a properly recycled stream providing another outlet of waste for sorters and recyclers. We need the material to be collected and it will require investment of course. The current infrastructure may be sufficient if managed properly. To increase the number of streams collected and volumes there may not be the need to invest in new infrastructure but just to boost current infrastructures. Chemical recycling is also part of the picture. There is a place for everyone, and mechanical and chemical are absolutely complementary. At the end of the day, we need to try to recover as much material as possible, then minimise the use of virgin resources so we know streams that can be as effective as possible. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Q&A: Braskem Idesa Mexico terminal to feed cracker


14/05/25
News
14/05/25

Q&A: Braskem Idesa Mexico terminal to feed cracker

Mexico City, 14 May (Argus) — The new ethane storage terminal owned 50:50 by Brazilian-Mexican JV Braskem Idesa and the Netherlands-based Advario will be fully operational by mid-July, when the Etileno XXI cracker returns from a full-stop maintenance program, said Cleantho Leite, chief executive of Terminal Quimica Puerto Mexico (TQPM), in an interview with Argus. Edited highlights follow. What does the new terminal represent for Braskem after years of limited ethane supply? TQPM solves a long-standing ethane supply shortage in Mexico, which remains one of the largest ethane consumers in the region. Under the previous supply contract with Pemex, we did not have full supply. It was like having an F1 car with only 70pc of its fuel — eventually, we would run out of supply before even completing the race. Now, thanks to this terminal, Braskem can import the ethane it needs from the US to ensure consistent operations. Of course, we will continue buying from Pemex whenever possible, as its ethane remains the most cost-effective solution. But with this infrastructure in place, we are no longer tied to a single supply source. When will the terminal begin operating at full capacity? We are currently in pre-operational stages, and commercial operations are expected to begin by late May. Then, the Braskem complex will enter its scheduled maintenance shutdown. Once it resumes in mid-July, we will begin transitioning to full utilization of the terminal. The facility is fully capable of covering up to 100pc of Braskem's demand. In fact, it was designed with a 25pc buffer — excess capacity that could support future expansions. The equipment is ready, and whether we go from 75pc to 100pc in 15 days or in a month will depend entirely on Braskem's operating strategy. What is going to happen with the ethane Pemex no longer uses? For now, I do not see Pemex's own complexes significantly increasing their consumption of ethane. It is not like they will double their intake overnight. At least during 2025, Pemex is still in the process of reactivating its own crackers, so that volume will remain available to Braskem. If Pemex eventually requires more supply, it has its own import terminal. Alternatively, it could request capacity from TQPM if needed. Also, Braskem has long-term contracts that allow flexibility in adjusting volumes. If there is unused ethane in a given month, we can resell it to other locations. That has always been part of our strategy. The Braskem group, through Braskem Trading and Shipping, has consistently found alternatives for any surplus. Do you foresee any regulatory or permitting issues under the new legal framework in Mexico? No. We already hold all relevant permits from the now-defunct energy regulator CRE, which are now under the authority of the new CNE. That means no additional permits are required for the terminal under the new framework. Furthermore, the open-access guidelines established by the CRE are still valid and will be used by the CNE to issue and manage permits. The only other authorizations we need are from customs, which have not hindered pre-operations. Historically, the CRE reviewed transportation tariffs every five years, and we expect the CNE will follow the same regulatory schedule. What is the outlook for Braskem's crackers in Brazil regarding a transition to ethane? In Brazil, Braskem currently operates four crackers — three based on naphtha and one, in Rio de Janeiro, on ethane. The company is studying a broader shift toward ethane to reduce dependence on naphtha. Shipments to Brazil would follow a similar model to what we are doing in Mexico, with contracts signed with US suppliers. Our Salvador Bahia plant already receives ethane occasionally, using vessels that take roughly 12 days to arrive. Mexico has a geographical advantage — just two days away from US ethane. What are the long-term plans for TQPM? Our immediate focus is stable operation and efficiency. Long term, the terminal is well located in the Interoceanic Corridor and could serve future industrial projects. We have space and docking infrastructure to add tanks for chemicals, ammonia or propane. Nothing is confirmed yet, but in 3–4 years we expect opportunities to emerge. By Édgar Sígler Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Naphtha no longer competitive feedstock: Braskem


12/05/25
News
12/05/25

Naphtha no longer competitive feedstock: Braskem

Sao Paulo, 12 May (Argus) — Brazil-based petrochemical producer Braskem is pursuing a strategic shift in polymers production by favoring natural gas liquid (NGL) feedstocks and moving away from naphtha. Naphtha is no longer a competitive feedstock in the petrochemical sector, driving the need for greater flexibility in raw material sourcing, chief executive Roberto Ramos said Monday on the company's first-quarter earnings call. The transition to lighter feedstocks is part of a broader initiative to enhance efficiency, reduce costs, and improve competitiveness amid evolving global petrochemical dynamics, Ramos said. The company's plan focuses on increasing the use of ethane and propane as primary feedstocks in Mexico and Brazil. In Mexico, Braskem has inaugurated an ethane import terminal, which will provide a stable supply to its operations. The facility has the capacity to store 80,000 b/d of ethane, while the polyethylene (PE) plant processes 66,000 b/d. This surplus storage has prompted considerations for a new PE unit in Mexico to maximize the available feedstock. In Brazil, Braskem aims to reduce reliance on naphtha-based PE production by integrating more natural gas-derived inputs. The company is evaluating projects to utilize feedstocks sourced from shale gas extracted in Argentina's Vaca Muerta formation. The petrochemical complex in Rio Grande do Sul, which operates with a mixture of naphtha and natural gas, is among the facilities targeted for increased gas utilization. Braskem's Rio de Janeiro facility is also undergoing expansion of its gas-based assets, adding two new furnaces that crack ethane and propane to increase capacity to 700,000 t/yr. This increased production is anticipated to lower unit production costs and improve profitability. The move to gas-based production is expected to optimize operations and align Braskem's facilities with cost-effective supply chains, Ramos said. The shift comes as global trade dynamics continue to influence raw material availability. While US-China trade agreements have temporarily eased tariff pressures, Braskem is trying to position itself to navigate long-term supply chain uncertainties by diversifying its production inputs. Ramos has also indicated potential investments in ethanol dehydration technology, which would allow select facilities to convert ethanol into ethylene, further supporting PE production with an alternative renewable feedstock. Production and sales Braskem said its first-quarter domestic resin sales fell by 4pc from the same period in 2024, but sales were little changed from the prior quarter. Domestic resin sales totalled 807,000 metric tonnes (t) in the first quarter, down from 839,000t a year earlier. Resin sales volumes remained in line with the fourth quarter last year, but the company highlighted a quarter-on-quarter increase in PE and polypropylene (PP) sales volumes of 2pc and 3pc, respectively, offset by a 16pc reduction in PVC sales. In Mexico, Braskem Idesa's PE sales fell by 11pc from the same period in 2024 and by 5pc quarter-on-quarter, as the company is looking to manage inventory ahead of a planned maintenance shutdown in the second quarter. The plant utilization rate reached 79pc, rising from the fourth quarter on higher ethane availability through the Fast Track solution. But utilization fell by four percentage points year-on-year, mainly due to reduced supply of ethane from Mexico's Pemex. Braskem posted a first-quarter profit of $114mn, rebounding from a loss of $273mn a year earlier and a loss of $967mn in the fourth quarter last year. By Fred Fernandes Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more