Analysis: Vietnam emerges as polymer hub amid trade war
Vietnam is positioning itself as southeast Asia's top polymer hub as it indirectly benefits from the US-China trade war.
The trade war has created two positive spillovers for Vietnam, through the increased availability of cheaper US-origin cargoes and the emergence of new conversion investment from China.
Vietnam is a key importer of polymers, with estimated imports of 5.59mn t/yr of polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET) and polyvinyl chloride (PVC) in 2018, according to the Vietnam Plastics Association (VPA).
PE imports totalled 1.73mn t/yr, while PP imports were at 1.34mn t/yr last year, the VPA data show.
Vietnam's imports typically come from the Middle East, South Korea and Association of Southeast Asian Nations (Asean) member countries such as Thailand, Malaysia and Singapore.
But the emergence of US PE supply is adding new flows. More resins from the US that were originally bound for China are instead expected to make their way to Vietnam, especially given the country's attractive import duty structure.
US producers are steering clear of China because of restrictive duties placed on most polymers. The tariff rate on some US imports from China, including certain polymer grades, is scheduled to rise to 30pc from 25pc on 15 October.
By contrast, Vietnam has set its import duty at zero for PE and at 3pc for PP from most origins outside southeast Asia. Asean countries are exempt from duties when selling PP to Vietnam.
Import reliance
Vietnam does not have any existing PE production, making it highly dependent on imports. The country imports around 70pc of its domestic PP requirements.
Nghi Son Refinery and Petrochemicals (NSRP) produces 370,000 t/yr of PP, while Binh Son Refining and Petrochemical (BSR) operates a 150,000 t/yr PP unit, according to Argus data.
Most PE and PP is sold to Vietnam directly by producers or by international traders with distribution channels in the country. Global polymer traders such as Vinmar and Tricon have started to export US-origin PE from Houston into Vietnam and other Asean nations in their own branded bags in recent months.
Shipment timings from the US to Vietnam vary from two to three months, depending on occasional port congestion in Houston. Asean-origin material benefits from shorter transit routes, ranging from a few days to two weeks.
The largest polymer distributor in Vietnam by far is OPEC Plastics, thanks to its significant distribution channels across the country for PE, PP, polystyrene (PS), ethylene vinyl acetate (EVA), PVC and PET. OPEC Plastics, which also exports PE out of Houston, has an international presence in Asean, China, Russia and the Middle East.
Chinese investment
The Vietnamese polymer industry is increasingly attracting newer investments from Chinese convertors, which are shifting their factories to the country to circumvent restrictive tariffs on US-origin PE. Taiwan's Formosa Plastics, South Africa's Sasol and global producers ExxonMobil and Lyondellbasell are among the companies that have added new PE capacity in the US this year. The absence of extensive China distribution has helped drive Vietnam's fast emergence as a key outlet in Asia for these newer US capacities.
The wave of relocations of Chinese convertors to Vietnam has happened relatively quickly, with only slightly more than a year having elapsed since the trade war first escalated. The investments in Vietnam also come as China is forging ahead with its Belt and Road initiative to expand its international investments in southeast and central Asia.
Three out of 10 new convertor units in Vietnam have now been bought by polymer factories with Chinese owners, a major machinery manufacturer said.
Chinese convertors with a presence in Vietnam have had to act quickly to preserve their businesses, which have already been hit by sluggish domestic growth in downstream sectors such as automotive and packaging in China.
High-level US-China talks will resume this week in Washington, but prospects for a deal that would resolve the trade war between the two countries remain remote.
Vietnam-EU FTA
The new Vietnamese factories, most of which are Chinese-owned, are not just expected to benefit from buying cheaper PE resins from the US but will also soon be able to sell finished products to Europe at preferential duty rates.
The EU and Vietnam signed a free-trade agreement (FTA) in June that will progressively eliminate nearly all customs duties on goods traded between the two sides. The FTA is likely to be formally ratified later this year.
Vietnam may also emerge as an alternative export destination for newer Chinese PP resin producers. Guangxi Petrochemical and Sinopec Beihai operate polymer units in Guangxi, close to the China-Vietnam border.
Vietnam will add to its existing PP capacity and introduce PE production for the first time in the coming years. South Korean textiles and chemicals maker Hyosung will start a new petrochemical complex in Vietnam's Ba Ria-Vung Tau province early next year. Its new 300,000 t/yr PP unit is scheduled to come on stream in the coming months.
In the longer term, Long Son Petrochemicals, majority owned by Thailand's SCG, is scheduled to start up a new 450,000 t/yr PP unit and 1mn t/y PE plant in 2024 in Vietnam's Vung Tau, Argus data show.
Related news posts
Maine classifies chemical recycling as 'processing'
Maine classifies chemical recycling as 'processing'
Houston, 13 March (Argus) — Maine has classified chemical recycling as "chemical plastic processing" instead of recycling, one of the first laws of its kind. State senator Anne Carney's (D) proposal, Legislative Document 1660, passed into law on 5 March without a signature from Governor Janet Mills. Carney introduced the legislation last year in opposition to state chemical recycling laws supported by the plastics industry that reduce government oversight. Chemical recycling laws "allow facilities to evade the public permitting process, siting restrictions, reporting requirements, and operating conditions that apply to all solid waste facilities," Carney testified last May to Maine's Joint Standing Committee on Environment and Natural Resources. "LD 1660 will protect Maine from this type of harmful legislation by reinforcing Maine's solid waste hierarchy and accurately reflecting that this process and these facilities are not recycling." Chemical recycling typically uses heat and pressure to convert waste plastics that are hard to recycle mechanically into pyrolysis oil and other raw materials that can be used to create new plastics. Chemical recycling laws categorize chemical recycling as manufacturing instead of solid waste disposal, which allows for less regulatory oversight. A flurry of chemical recycling laws, supported by plastics industry organizations such as the American Chemistry Council (ACC), have been passed in US states. Last year, Kansas became the 24th state to pass a chemical recycling law. The ACC said the Maine law will inhibit "innovative technologies" that could lead to an increase in types of plastic that can be recycled. "LD 1660 contains vague language that could disincentivize investments in recycling technologies – working against much needed increases in plastics recycling, and potentially disadvantaging economic opportunities," ACC division president Ross Eisenberg told Argus . By Zach Kluver Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Indonesia withdraws import mandate for key PE, PP
Indonesia withdraws import mandate for key PE, PP
Singapore, 8 March (Argus) — The Indonesian trade ministry has withdrawn the enforcement of a mandatory import quota for most polyethylene (PE) and polypropylene (PP) grades, along with polystyrene, polyethylene terephthalate and monoethylene glycol, which was previously expected to take effect on 10 March. The official announcement was made on 6 March and supported with a decree released today, seen by Argus . Market participants have waited for an official statement following a semi-official announcement by the trade ministry on 29 February. Imports of PP co-polymers will still require an import quota, which has been in force for years. The latest requirement of an additional surveyor report from 10 March has also been withdrawn. The trade ministry announced on 11 December that domestic PE and PP importers will need to apply for specific quotas to be able to import polymer resins from 10 March, or risk cargoes being rejected during customs clearance. Indonesia's PE and PP import dependency and the short-notice enforcement have led to objections by local and international associations, with disrupted resin supplies likely to cause a significant impact on the production and competitiveness of finished plastics. The enforcement was earlier expected to be delayed possibly by at least three months , based on local associations' appeal requests to the trade ministry. Indonesia imported 749,000t of combined liner low-density polyethylene (LLDPE) and high-density polyethylene in 2023, more than 45pc of its annual consumption, according to Argus estimates. Imports increased by 21pc from 2022. The country also imported 1.25mn t of PP in 2023, around 65pc of its annual consumption, but this was down by 5pc from 2022. Indonesian PE and PP buying interest and imports are expected to resume slowly from March with key distributors and converters holding high inventories because of an earlier stockbuild. Converters are also expected to reduce operating rates in March–April during Ramadan and the Eid al-Fitr holidays. Converters could take longer to consume their resin stocks as a result. The country will be closed for the Eid al-Fitr holidays on 8–15 April, but some converters could shut their plants earlier, further limiting import discussions. Some converters began making enquiries for resin supplies, but mainly preferred cargo arrivals from mid-April. Tighter supplies add price support The stocking up of domestic PE and PP supplies, unplanned cuts in domestic production and restricted imports led to higher prices in Indonesia during January–February. The imminent withdrawal of import mandates could lead to domestic prices falling, especially for the commodity grades, because of converters and distributors' earlier stockbuilding. Some key distributors began reducing domestic prices slightly last week following the semi-official announcement. But regional PE and PP import prices are already far below Indonesian domestic prices, so the impact on import prices may be limited. PE and PP supply at Indonesian and regional producers could tighten in April–May because of plant maintenance plans, which could balance the slowly returning demand in Indonesia and support prices. Indonesia's Chandra Asri is expected to shut its sole naphtha cracker, 736,000 t/yr PE plant and 590,000 t/yr PP plant from late April or May for a major 45-day turnaround, according to market sources. The return of Indonesian imports could help regional markets achieve some stability. Converters across southeast Asia are resisting current high PE and PP offers, citing weak downstream demand. Argus assessed southeast Asian duty-free LLDPE film prices at $1,060-1,100/t cfr southeast Asia on 8 March, $40/t higher from two months ago. Southeast Asian duty-free PP raffia prices were $1,050-1,070/t cfr southeast Asia on 8 March, $40/t higher compared with two months ago. Chinese LLDPE film and PP raffia prices were $940-950/t and $910-920/t cfr China, respectively, on 8 March, keeping stable and rising by $30/t, respectively, from two months ago. By Yee Ying Ang Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Global bio-, e-methanol projects on the rise
Global bio-, e-methanol projects on the rise
New York, 7 March (Argus) — The number of projects expected to produce bio- and e-methanol — seen by some as a future marine fuel — is rising steadily, according to industry trade association the Methanol Institute (MI). The MI is tracking 130 projects planning 16mn metric tonnes (t) of production capacity by 2027 and 19.5mn t by 2028, up from two two years ago when MI was tracking 80 projects with 8mn t capacity by 2027. About 6.5mn t of the capacity is already operational, in construction or the engineering stages, according to MI. About 60pc of the projects are for e-methanol and the rest are for bio-methanol. E-methanol is produced using renewable electricity while bio-methanol is produced using biomass. "The anticipated demand for methanol as a marine fuel is driving much of the interest in expanding the supply of methanol from conventional and low carbon feedstocks," said MI. There are 251 methanol-fueled vessels on the water or on the order book, including container ships, chemical tankers, ferries, car carriers and bulk carriers, according to MI. A large 16,000 twenty foot equivalent unit (TEU) container ship can burn 35,000-40,000t/year of methanol, said MI. Methanol has about half the energy content of an equivalent volume of very low-sulphur fuel oil (VLSFO). Thus, the 19.5mn t of methanol production expected by 2028 would displace about 9.75mn t of VLSFO, or less than 5pc of the 200mn t/year of total global marine fuel demand. Bio-methanol is also currently prohibitively expensive. Bio-methanol averaged at $2,231/t VLSFO-equivalent in February in Amsterdam-Rotterdam-Antwerp, about four times the price of VLSFO, Argus assessments showed. By Stefka Wechsler Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
BP to close third of capacity at German refinery
BP to close third of capacity at German refinery
Hamburg, 7 March (Argus) — BP has announced plans to permanently close a third of the crude distillation capacity at its 257,000 b/d Gelsenkirchen refinery in western Germany from 2025 and start co-processing biofuels at the plant's hydrocracker. The capacity reduction is likely to involve one of the crude distillation units (CDUs) being taken out of service, although a BP spokesman could not confirm whether it will be a CDU at the Scholven or Horst section of the refinery. The refinery is "currently not competitive", according to a statement by refinery head Arno Appel. Challenges include being "too complex" to operate with "structural costs that are too high", he said, possibly alluding to how the refinery is spread over two separate sites. BP plans to shift focus at Gelsenkirchen towards petrochemicals and low-emission fuels. The hydrocracker at the refinery will start co-processing biofuels, meaning that renewable components will be mixed into its feedstock. BP said this will enable output of sustainable aviation fuel (SAF) among other products. BP said the refinery's crude capacity will fall from around 12mn t/yr now to around 8mn t/yr. Five units in total will be closed across the Scholven and Horst sites, it said. The firm declined to specify which units. BP may yet face opposition from trade unions. The Gelsenkirchen refinery employs around 2,000 people. The planned changes will mean fewer jobs, Appel said. "We want to start negotiations with the employee representatives as quickly as possible." Some traders who import products from the Amsterdam-Rotterdam-Antwerp (ARA) hub into Germany via the Rhine river said they expect trade volumes to rise when BP trims capacity at Gelsenkirchen. Refining capacity in western Germany was already poised to be cut next year. Shell plans to stop crude processing at its 147,000 b/d Wesseling refinery in 2025 and is also turning the hydrocracker there into a base oil plant. Wesseling is part of Shell's Rhineland refinery complex in the Cologne region. Refineries such as Gelsenkirchen and Wesseling have had to contend with a drop in domestic demand for oil products in recent years. German diesel demand was 5-10pc lower in November and December 2023 than in the same months of 2019, according to Eurostat data. This amounts to a fall of roughly 40,000-50,000 b/d. BP is the latest in a growing group of European refiners to acknowledge challenges around profitability and long-term viability. UK-Chinese venture Petroineos made a similar comment about its 150,000 b/d Grangemouth refinery in Scotland last year when it announced a plan to close the facility in 2025 and turn it into a fuel import terminal. BP sold the Grangemouth refinery to UK petrochemicals firm Ineos in 2005. by Max Steinhau and Benedict George Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.